Scientific papers published in specialist journals at the Cluster of Excellence: Materials at the Departments of Materials Science, Physics, Electrical Engineering and Mechanics, and Polymer Engineering. (As of February 2026)
Publications 2026
PH
Beyond global metrics in capacitive water deionization: Position-resolved ion concentration from operando X-ray transmissionDesalinationME
On the influence of surface roughness on the acoustoelastic effect of Rayleigh wavesActa AcousticaWW
W and C co-segregation at dislocations in a γ -TiAl based alloy identified by correlative APT-TEM observationsMaterials and DesignDOI: 10.1016/j.matdes.2025.115313
ME
On the influence of voids on the acoustoelastic effectActa mechanicaDOI: 10.1007/s00707-026-04628-2
WW
The Cross Notched Roller Test - a novel strength test for ceramic rollers. Part II: Experimental Procedure and ResultsJournal of the European Ceramic SocietyDOI: j.jeurceramsoc.2025.117964
WW
Morphology and yield of W nanoparticles in gas aggregation: Pathways towards functional nanocomposite filmsSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2025.133089
WW
Bayesian optimization of laser-aided fracture toughness specimen preparationOpen ceramicsDOI: 10.1016/j.oceram.2026.100914
WW
Correlative characterization of structural changes across a white etching layer boundary: Evidence for a single-slip mechanismMaterials & designDOI: 10.1016/j.matdes.2026.115473
PHWW
Quantitative estimation of nanoparticle/substrate adhesion by atomic force microscopyBeilstein journal of nanotechnology DOI: 10.3762/bjnano.17.1
KT
Radio Frequency O2-Plasma Treatment of Carbon Felts: Stoichiometric Insight into C1s and O1s XPS with Correlated Raman and SEM CharacterizationApplied surface scienceWW
Precipitation and phase evolution in a Cu-modified near-α titanium alloy designed for additive manufacturingActa materialiaDOI: 10.1016/j.actamat.2026.121901
KT
Impact of Seasonal Composition on the Long-Term Performance of Post-Consumer Recycled PolypropyleneJournal of applied polymer scienceDOI: 10.1002/app.70501
WW
First-principles study of Ti-decorated graphene-based single-atom catalyst for MgH2 dehydrogenationInternational Journal of Hydrogen Energy WW
The Cross Notched Roller Test - a novel strength test for ceramic rollers. Part I: Stress field and error analysisJournal of the European Ceramic SocietyDOI: j.jeurceramsoc.2025.117931
KT
Impact of Processing Parameters on the Morphology and Performance of PE/PA6/EVOH BlendsJournal of applied polymer scienceDOI: 10.1002/app.70204
WW
Plasma wire arc additive manufacturing ( PWAAM ) of high-strength steel on a high-carbon steel , consideration and characterization of the transition areaMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.149543
WW
Efficient thermal field optimization of PVT simulations for SiC single crystal growthJournal of crystal growthDOI: 10.1016/j.jcrysgro.2026.128490
WW
Subcritical crack growth in cold sintered ZnO ceramicsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2025.117761
Publications 2025
KT
Spatial control of curing kinetics in thiol-ene-systems through antagonistic photoreactionsNature CommunicationsDOI: 10.1038/s41467-025-63407-0
MEWW
On the impact of inhomogeneities on vacancy diffusion controlled void and crack formation in SAC305 solder jointsNext MaterialsDOI: 10.1016/j.nxmate.2025.101163
WW
Deformation behavior and strengthening mechanisms of high-entropy alloys under high strain rate across wide temperature rangesInternational journal of plasticityDOI: 10.1016/j.ijplas.2025.104321
WW
Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument studyUltramicroscopyDOI: 10.1016/j.ultramic.2025.114105
KT
A comprehensive study on thermoplastic elastomers for additive manufacturing of leg prosthesisNext MaterialsDOI: 10.1016/j.nxmate.2025.100700
WW
Ultra-high strength of nanocrystalline Inconel 718 composites by high-pressure torsion deformation and graphite reinforcementsMaterials Science and Engineering: ADOI: 10.1016/j.msea.2025.148142
WW
Controlling mechanical performance and structural homogeneity of large-sized Zr-based bulk metallic glasses via mold temperature regulationJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.06.019
WW
A high-throughput framework for pile-up correction in high-speed nanoindentation mapsMaterials and DesignDOI: 10.1016/j.matdes.2025.113708
KTME
On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric compositesMechanics of advanced materials and structuresDOI: 10.1080/15376494.2025.2457602
WW
Hot deformation behaviors and their constitutive modeling of dual-phase Al0.6CrMnFeCoNi high-entropy alloyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.181464
WW
Columnar grain boundaries are the weakest link in hard coatings: insights from micro-cantilever testingMaterials Research Letters [Elektronische Ressource]DOI: 10.1080/21663831.2025.2560526
KT
Monitoring chemical processes in redox flow batteries employing in situ and in operando analysesEnergy & Environmental ScienceDOI: 10.1039/D5EE01311A
KT
Progress towards composition-based inline sorting and recycling of multilayer polymer packagingSustainable Materials and TechnologiesDOI: 10.1016/j.susmat.2025.e01385
KT
A New Approach Using Multi-Layer Films from Food Waste as a Shrink FilmProcessesDOI: 10.3390/pr13020560
KT
Production of Anisotropic NdFeB Permanent Magnets with In Situ Magnetic Particle Alignment Using Powder Extrusion MaterialsDOI: 10.3390/ma18153668
WW
Wear and corrosion resistance of a laser powder bed fused AZ91D magnesium matrix composite with TiC reinforcementMaterials and DesignDOI: 10.1016/j.matdes.2025.114263
KT
Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different ClimatesIEEE Journal of PhotovoltaicsDOI: 10.1109/JPHOTOV.2024.3523546
ME
Electrode and process design for regulation of liquid metal embrittlement phenomenon during spot welding of dual‑phase steel: numerical modelling and experimentsWelding in the worldDOI: 10.1007/s40194-025-02132-0
WW
Sequential phase evolution of copper mold cast Al-Cu-Ni-(Zr) alloys: Zirconium Micro-alloying results in ultrahigh hardness (∼5 GPa)Materials characterizationDOI: 10.1016/j.matchar.2025.115515
WW
Crack resistance of α2|γ and γ|γ interfaces within a TiAl alloy determined by in situ nano-fracture experimentsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.07.047
PH
Ferroelectricity in graphene nanoribbon devices enabled by collective water molecule dynamicsNature CommunicationsDOI: 10.1038/s41467-025-65922-6
WW
Additive manufacturing of a crack-free tool steel with high C and Cr contents: Microstructure and mechanical propertiesMaterials characterizationDOI: 10.1016/j.matchar.2025.114919
WW
Shear-activated phase transformations of diborides via machine-learning potential molecular dynamicsActa materialiaDOI: 10.1016/j.actamat.2025.121606
KT
Detection of degraded high-density polyethylene via near-infrared hyperspectral imagingWaste managementDOI: 10.1016/j.wasman.2025.114960
PH
Natural dielectrics for organic field effect transistors: a study on resins derived from larch, spruce and Atlas cedar Pinaceae treesMaterials AdvancesDOI: 10.1039/d5ma00401b
WW
Effect of Zr on the Microstructure, Friction Coefficient, and Contribution to the Strengthening Mechanisms of Al10Sn4Si1Cu(1Zr) Alloys Metals and materials internationalDOI: 10.1007/s12540-025-02095-3
WW
Machine-learning-assisted optimization of constitutive modeling and microstructural insights into the hot deformation of L12-strengthened Co33Cr23Ni34Al5Ti5 chemically complex alloysMaterials characterizationDOI: 10.1016/j.matchar.2025.115586
KT
Synthesis and characterization of thermolatent bases with varying activation temperaturesRSC AdvancesDOI: 10.1039/d5ra05095b
WW
How austenite improves the fatigue behavior of high-speed steelsMaterials and DesignDOI: 10.1016/j.matdes.2025.114793
WW
Tailoring strength and ionic conductivity in zirconia-based solid oxide electrolytes using a multimaterial approachJournal of the American Ceramic SocietyDOI: 10.1111/jace.20632
WW
Phase-separated Zr70-xAl12.5Fe17.5Yx (x = 0–25 at.%) metallic glasses with suitable mechanical properties for possible implant applicationsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.02.252
WW
A universal ML model for segregation in WComputational materials scienceDOI: 10.1016/j.commatsci.2025.113847
KT
Influence of Viscous Dissipation on Wear Behavior and Hardness Evolution of Tool Steels in Glass-Fiber-Reinforced Polymer ProcessingSteel research internationalDOI: 10.1002/srin.202500598
WW
Advanced nanoindentation testing: Beyond the Oliver–Pharr methodMRS BulletinDOI: 10.1557/s43577-025-00921-y
ME
In-situ austenite graingrowth measurements in an X80 line pipe steelMaterials characterizationDOI: 10.1016/j.matchar.2025.114998
KT
Comparing Mode I, Mode II and Mixed-Mode I/II interlaminar fracture toughness of glass and carbon fiber reinforced polymer laminates with the same epoxy matrix systemEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2025.111009
WW
Tracking changes in segregation on a single grain boundary in a ferritic steel by repeated atom probe tomographyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.08.260
KT
Automated thermographic monitoring of crack growth in short fiber reinforced polymers under cyclic loadingInternational journal of polymer analysis and characterizationDOI: 10.1080/1023666X.2025.2563787
KT
Dexter Energy Transfer-Enabled Biobased Oxime Ester-Photosensitizer System for Rapid Visible-Light/Sunlight-Induced Photocuring and 3D PrintingMacromoleculesDOI: 10.1021/acs.macromol.5c01580
WW
Superstoichiometric (Al,Cr)N: Nitrogen\textquoterights whereabouts and role in structure-property relationshipsActa materialiaDOI: 10.1016/j.actamat.2025.121158
WW
Predictive modeling of the bainite start temperature using Bayesian inferenceActa MaterialiaDOI: 10.1016/j.actamat.2025.121131
PH
Natural waxes from plant and animal origin as dielectrics for low-voltage organic field effect transistorsJournal of Materials Chemistry CDOI: 10.1039/d5tc01419k
KT
Multi-Material 3D Printing of Soft Dielectric Actuators With Optimized ElectrodesJournal of applied polymer scienceDOI: 10.1002/app.58024
WW
Interstitials as a key ingredient for P segregation to grain boundaries in polycrystalline α-FeScripta materialiaDOI: 10.1016/j.scriptamat.2025.116864
WW
Achieving strength-ductility synergy in AISI 904L superaustenitic alloy through severe plastic deformation and post-deformation annealingMaterials Science and Engineering: ADOI: 10.1016/j.msea.2025.148382
WW
From Mechanics to Electronics: Influence of ALD Interlayers on the Multiaxial Electro-Mechanical Behavior of Metal–Oxide BilayersAdvanced functional materialsDOI: 10.1002/adfm.202526343
WW
Inversion of dislocation-impurity interactions in α-Fe under magnetic state changesScripta materialiaDOI: 10.1016/j.scriptamat.2025.116766
WW
Insights into weld metal hot cracking of austenitic stainless steels: Atomistic characterization of crack surfacesApplied surface scienceDOI: 10.1016/j.apsusc.2025.163580
KT
Synthesis of tetramethylguanidine-based photobase generators: light-guided dynamics in thioester networksPolymer ChemistryDOI: 10.1039/d5py00779h
WW
Influence of Cr addition on chromaticity and mechanical properties of solid solution Cu-Ni-Cr alloys with dual-phase structure based on liquid phase separationJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.183256
WW
Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methodsInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2024.12.433
KTWW
Shining a Light on Carbon-Reinforced Polymers: Mg/MgO and TiO2 Nanomodifications for Enhanced Optical PerformanceJournal of Composites ScienceDOI: 10.3390/jcs9040187
KT
Computational Modeling of the Continuous Separation of a Molten Polymer Mixture in a Centrifugal FieldMacromolecular Theory and SimulationsDOI: 10.1002/mats.202400109
KT
Polyamide 12 powder ageing in laser beam-based powder bed fusion and its combined effects on powder and component characteristicsRapid Prototyping JournalDOI: 10.1108/RPJ-08-2024-0351
KT
Investigation of the correlation between fatigue behavior and fatigue crack growth in short fiber reinforced polymersProcedia Structural IntegrityDOI: 10.1016/j.prostr.2025.06.181
WW
3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masksMaterials and DesignDOI: 10.1016/j.matdes.2025.113809
KT
Validation of a FEM-Based Method to Predict Crack Initiation from Arbitrary-Shaped NotchesJournal of Composites ScienceDOI: 10.3390/jcs9030102
WW
Enhancing densification of metakaolin-based geopolymers via the cold sintering processOpen ceramicsDOI: 10.1016/j.oceram.2025.100863
WW
Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomographySmall MethodsDOI: 10.1002/smtd.202401650
WW
Effect of cold rolling on the microstructure and plastic deformation behavior of Ti41Zr32Ni6Ta7Be14 metallic glass matrix compositesJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.181248
WW
Exceptional tolerance of austenitic stainless steels to tramp-impurity contaminationJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.09.255
WW
Segregation to grain boundaries in disordered systems: An application to a Ni-based multi-component alloyMaterials and DesignDOI: 10.1016/j.matdes.2025.114074
WW
Achieving Complex Nanostructures: The Role of Hydrogen in Controlling Mechanical Alloying and Microstructure Evolution in the TiVZrNbHf-Cu SystemAdvanced scienceDOI: 10.1002/advs.202507168
WW
Structure-property-bioresponse correlation in Zr-based metallic glassesMaterials and DesignDOI: 10.1016/j.matdes.2025.115227
KT
The effect of liquid organic hydrogen carrier on the physico-mechanical and rheological properties of injection-molded high-density polyethylene and polyketoneResults in EngineeringDOI: 10.1016/j.rineng.2025.103918
WW
Nanoparticle-functionalized 3D substrates for superior analytical performance in surface enhanced Raman spectroscopyJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0004328
WW
Crystallization of Fe74Mo4P10C7.5B2.5Si2 metallic glass: Insights from in-situ synchrotron diffraction and Flash DSCMaterials today advancesDOI: 10.1016/j.mtadv.2024.100550
WW
Enhanced damage tolerance of Ce-TZP ceramics through a layered architectural designJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2025.117427
WW
Precipitation and growth behavior of β0 phase in the α2/γ lamellar colonies of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.179381
KT
Correlation of temperature-dependent fracture behavior and thermo-mechanical behavior of a polypropylene pipe grade material under cyclic loadEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2025.111182
WW
Hybrid chemisorption−physisorption of subcritical CO2 on coals: Implications for Safe and Long-Term Underground CO2 SequestrationEnergy & fuelsDOI: 10.1021/acs.energyfuels.5c02015
WW
Prediction and identification of point defect fingerprints in X-ray photoelectron spectra of TiN x with 1.18 ≤ ≤ 1.37Materials and DesignDOI: 10.1016/j.matdes.2025.114752
WW
Enhanced dehydrogenation and regeneration behavior of LiBH4–LiAlH4–MgCl2 in nanoporous carbonsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2025.01.377
WW
Hydrogen decelerates fatigue induced grain boundary migration in nanostructured ironActa materialiaDOI: 10.1016/j.actamat.2025.120749
WW
Interfacial segregation of carbon atoms: the competition between grain boundaries and phase boundariesScripta materialiaDOI: 10.1016/j.scriptamat.2025.116842
KTWW
Cyclization of Polyacrylonitrile Nanofibers Enhanced by Cu2O During ElectrospinningMacromoleculesDOI: 10.1021/acs.macromol.5c00369
WW
Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitrideComputational materials scienceDOI: 10.1016/j.commatsci.2024.113629
WW
Short crack behavior at deep and microstructurally shallow notchesInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2025.109313
WW
Undercooling-governed glass-forming behavior in TiCu-based bulk metallic glass and compositeRare MetalsDOI: 10.1007/s12598-025-03573-8
KT
Multimaterial Digital Light Processing Three-Dimensional Printing of Materials with Different Relaxation KineticsACS applied polymer materialsDOI: 10.1021/acsapm.5c02906
WW
Identification of strain localization and fracture behavior of additive manufactured metallic lattices using digital image correlationJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.03.116
KT
Data-driven prediction of mechanical properties in recycled fibre-reinforced polymer composites: Integrating machine learning with material–processing feature importance analysisJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.12.062
PH
Laser-induced organic agglomerates on 2D MoS2 during thermal treatmentNano ExpressDOI: 10.1088/2632-959X/adf5da
ME
Numerical Investigation of the Influence of the Stress Multiaxiality on the Propagation Behavior of Rayleigh Waves.Applied Sciences : open access journalDOI: 10.3390/app15169109
WW
Promising pathways for balancing strength and ductility in chemically complex alloys with medium-to-high stacking fault energiesInternational journal of plasticityDOI: 10.1016/j.ijplas.2025.104358
WW
Strength limiting defects in additively manufactured ceramicsOpen ceramicsDOI: 10.1016/j.oceram.2025.100858
WW
The corrosion behaviors of Inconel 718 fabricated by additive-subtractive hybrid manufacturing in marine environmentCorrosion scienceDOI: 10.1016/j.corsci.2025.113133
ET
Beyond sorting: using sensor-based sorter data for real-time throughput and composition monitoringResources, Conservation and RecyclingDOI: 10.1016/j.resconrec.2025.108570
WW
Steel Cleanness Evaluation: Framework for Inclusion Characterization by Means of Automated and Manual SEM/EDS Analysis and Computational ThermodynamicsISIJ internationalDOI: 10.2355/isijinternational.ISIJINT-2025-260
WW
Workflow for a reproducible and accurate determination of free volume in metallic glasses by differential scanning calorimetryJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.10.038
WW
Linking microstructure with static and dynamic mechanical properties of Al-7Si-0.3Mg based alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.181161
KT
Optimizing the hole geometry of 2D plates for maximum tensile toughnessEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2025.111531
WW
CO2 utilization and sequestration potential in deep coal seams: A case study on Carboniferous coals from the Karaganda Basin, Kazakhstan Journal of CO2 utilizationDOI: 10.1016/j.jcou.2025.103204
PHWW
Selective Anion Anchoring in MOF-Based Supercapacitors Revealed with Operando Small-Angle X-Ray ScatteringNature CommunicationsDOI: 10.1038/s41467-025-63772-w
KT
Towards predicting failure modes in multi-material extrusion-based additive manufactured PETG/TPC structuresTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2025.105251
WW
Position-dependent variations in cell wall orientation of hardwood branches: Evidence from wide-angle X-ray diffractionNext MaterialsDOI: 10.1016/j.nxmate.2025.101347
KT
Frontal polymerization of thiol-acrylate covalent adaptable networksPolymer ChemistryDOI: 10.1039/d4py01106f
WW
Improving contact damage resistance of spinel translucent ceramics through a multi-layer designJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2024.117071
WW
Tailoring Zr-based bulk metallic glasses with noble metalsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.11.109
WW
Influence of Tramp Elements on Phase Transformations, Microstructure and Hardness of a 0.3 wt.%C Low-Alloyed SteelMetalsDOI: 10.3390/met15091053
ME
Metal physics based model for predicting the influence of plastic cold-working on the acoustoelastic effectComputational materials scienceDOI: 10.1016/j.commatsci.2025.114123
KT
How impurities affect the lifetime of plastic products - A circularity case study on polymer pipesPolymer TestingDOI: 10.1016/j.polymertesting.2025.108952
KT
On the connection of circular nodes with three and four tangentially attached struts and their influence on mechanical propertiesInternational journal of solids and structuresDOI: 10.1016/j.ijsolstr.2025.113752
WW
Interstitial-mediated spinodal decomposition pathways leading to strengthening in TiNbActa MaterialiaDOI: 10.1016/j.actamat.2025.121741
WW
Towards high-strength electrolyte-supported solid oxide fuel cellsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2024.116929
WW
Metastable AlB2 structured TM-Si-B2±z (TM = Ti, Zr, Hf) solid solutions from first-principlesActa materialiaDOI: 10.1016/j.actamat.2025.120857
WW
Formation and influence mechanism of metal vapor on the powder spatter and denudation in laser additive manufacturing of Al alloysJournal of Physics D: Applied PhysicsDOI: 10.1088/1361-6463/addad3
WW
Understanding the lower fracture resistance of cold sintered ceramicsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2024.116968
WW
Strain rate and temperature dependent viscoplasticity of sintered Cu nanoparticlesMaterials and DesignDOI: 10.1016/j.matdes.2025.114319
WW
Investigation of nanocomposite formation in TiSiN coatings using atom probe tomographySurface & coatings technologyDOI: 10.1016/j.surfcoat.2025.132535
WW
20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-ratesMaterials and DesignDOI: 10.1016/j.matdes.2025.113664
WW
Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mappingCommunications materialsDOI: 10.1038/s43246-025-00752-z
WW
Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysisScripta MaterialiaDOI: 10.1016/j.scriptamat.2025.116538
WW
Erratum to \textquoteright Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review\textquoteright [J. Alloys Compd. 1002 (2024) 174667]Journal of alloys and compoundsDOI: 10.1016/j.jallcom.2024.174667
WW
Retained austenite in multipass high-strength weld metal with a yield strength exceeding 1100 MpaJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.04.279
KT
Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken DesignPolymer TestingDOI: 10.1016/j.polymertesting.2025.108743
WW
Comparison of semi-empirical models, symbolic regression, and machine learning approaches for prediction of tensile strength in steelsInternational journal of engineering scienceDOI: 10.1016/j.ijengsci.2025.104247
WW
Nanoscale mechanisms limiting non-basal plasticity in magnesiumActa MaterialiaDOI: 10.1016/j.actamat.2025.121261
WW
Instance segmentation pipeline for etch pit detection and prismatic slip characterization on silicon carbide substratesEngineering Applications of Artificial IntelligenceDOI: 10.1016/j.engappai.2025.111881
KTWW
Friction and Wear Behavior of Laser-Induced Graphene Structures on Polyimide FilmsSmall ScienceDOI: 10.1002/smsc.202500335
ME
Damping of vibrations of a rod by dissipation due to diffusionScripta MaterialiaDOI: 10.1016/j.scriptamat.2024.116461
WW
Extrinsic and intrinsic strength of amorphous olivine filmsEuropean journal of mineralogyDOI: 10.5194/ejm-37-91-2025
WW
Crack deflection by design – Utilizing the material inhomogeneity effect on miniaturized additively manufactured structuresMaterials and DesignDOI: 10.1016/j.matdes.2025.114718
KTWW
Enhanced ductility by stress confinement in multilayered glassy thin filmsMaterials & designDOI: 10.1016/j.matdes.2025.114891
WW
Tailoring rapid thermal synthesis of Pt-based alloy nanoparticles on carbon support for hydrogen evolution reactionInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2025.150172
WW
Advancing small-angle X-ray scattering for complex metallic systems: Ti 2 Cu precipitation in a martensitic near- a Ti alloyJournal of applied crystallographyDOI: 10.1107/S1600576725008489
WW
Assessed uncertainty in the Ti-W phase diagram combining experimental and ab-initio dataCalphadDOI: 10.1016/j.calphad.2025.102872
KT
Influence of injection volume rate–driven temperature evolution on the molecular and mechanical properties of PA6.6 in injection moldingPolymer TestingDOI: 10.1016/j.polymertesting.2025.109075
WW
Toughening nitride hard coatings by deflecting cracks along grain boundariesMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.148392
WW
Phase transformations and metastable states in a Cu-20 m.% Sn alloy: An integrated HEXRD, TEM, and APT investigationJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.180399
KTWW
Chalcones as Wavelength-Selective Cross-Linkers: Multimaterial Additive Manufacturing of Macro- and Microscopic Soft Active DevicesChemistry of materialsDOI: 10.1021/acs.chemmater.4c02450
KT
The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content Journal of composites scienceDOI: 10.3390/jcs9030093
KT
Process optimization to produce anisotropic NdFeB permanent magnets from recycled powder via powder extrusionScientific reportsDOI: 10.1038/s41598-025-19111-6
WW
Microstructure and deformation behavior of the wire-arc directed energy deposited high-performance near-β Ti-10V-2Fe-3Al alloyMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.148825
WW
Radiation‐Resistant Aluminum Alloy for Space Missions in the Extreme Environment of the Solar SystemAdvanced materialsDOI: 10.1002/adma.202513450
WW
Core–shell WS2@WTe2/MoTe2 nanotubesSmall StructureDOI: 10.1002/sstr.202500258Digital Object Identifier (DOI)
WW
Intrinsic mechanisms influencing the tensile fracture reliability of CuZr-based amorphous microwiresRare MetalsDOI: 10.1007/s12598-024-03129-2
WW
Synthesis and Characterization of Mg-Ca-Zn(Sn) Bulk Metallic Glasses and Composites via Melt Spinning Followed by High-Pressure Torsion Metals and materials internationalDOI: 10.1007/s12540-025-01986-9
WW
Editorial for Special Issue “Nanoporous Carbons for Hydrogen Sorption and Electrochemical Energy Storage”C – journal of carbon researchDOI: 10.3390/c11020039
KT
Development of a probe tack method for determining the surface tack of thin-walled rubber filmsJournal of Rubber ResearchDOI: 10.1007/s42464-025-00330-5
WW
A 3D interconnected CNT-RGO hybrid networks for Al matrix compositesComposites Part B: EngineeringDOI: 10.1016/j.compositesb.2025.112746
PHWW
Transforming breakfast bio-waste into hydrogen storage materialsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2025.03.002
WW
Impact of microstructural variations on hydrogen permeation into duplex steelMaterialiaDOI: 10.1016/j.mtla.2025.102475
KT
Influence of processing parameters on the tape width in flashlamp-assisted automated tape placementProduction Engineering : research and developmentDOI: 10.1007/s11740-025-01341-2
KT
Development of biobased dynamic thiol–acrylate photopolymers: 3D-printed self-healing and shape memory materialsRSC AdvancesDOI: 10.1039/d5ra07879b
WW
Micro-to-nano-scale microstructural evolution and mechanical characteristics of (CrFeNiCu)100-xAlxhigh entropy alloys with x=0, 3, 5, 7, 10, 12 and 15 at.%Journal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.04.206
WW
Irradiation-induced atomic migration and its effect on the surface and mechanical properties of laser additive manufactured MWCNTs/ Al-Mg-Sc-Zr compositesJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.02.109
WW
Metastability matters: Exploring hardness and conductivity in bell bronze alloysMaterials and DesignDOI: 10.1016/j.matdes.2025.114791
WW
Deformation mechanisms of nanoporous flexible transparent electrodes based on particle-free silver inksMaterialiaDOI: 10.1016/j.mtla.2025.102483
WW
Harnessing the Power of α-Mg: Unveiling the Matrix Phase\textquoterights Role in Magnesium Alloys from Structure to FunctionJournal of magnesium and alloysDOI: 10.1016/j.jma.2025.11.008
WW
Nanostructured Metal Oxide from Metallic Glass for Water Splitting MaterialsDOI: 10.3390/ma18174082
PH
Azapentacene Derivative Thin Film Growth on TiO2(110): Morphology and ElectronicsJournal of Physical Chemistry CDOI: 10.1021/acs.jpcc.5c01435
KT
Microstructure–Properties Relationships in Compatibilized Recycled Polyethylene Blends: Insights From PiFM and Raman SpectroscopyJournal of applied polymer scienceDOI: 10.1002/app.57865
KT
Synthesis and Characterization of Imidazolium-Based IonenesMoleculesDOI: 10.3390/molecules30193961
WW
Ab-initio grain boundary thermodynamics beyond the dilute limitActa materialiaDOI: 10.1016/j.actamat.2025.120725
WW
Decomposition and segregation phenomena in PVD TiBN coatingsMaterials and DesignDOI: 10.1016/j.matdes.2025.114912
WW
Highly nanotwinned transition metal nitride film enabled by negative stacking fault energyActa materialiaDOI: 10.1016/j.actamat.2025.121475
KT
Using sequentially orthogonal photoreactions to tune mechanical properties of thiol-methacrylate networksMonatshefte für Chemie = Chemical monthlyDOI: 10.1007/s00706-025-03414-5
KT
Through-thickness compaction response of reinforcement fabrics: Development of a test standardComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2025.109348
KT
Innovative approaches to hydrogen storage in vinyl aromatic polymersInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2025.06.182
KT
Development of a high-performance dual-curing Vitrimeric acrylate/epoxy system for 3D printing: Analysis of thermal effect and network evolutionReactive and Functional PolymersDOI: 10.1016/j.reactfunctpolym.2025.106494
WW
Atomic Layer-Deposited Interlayers for Robust Metal-Polymer InterfacesACS Applied Materials and InterfacesDOI: 10.1021/acsami.5c05156
KT
Influence of reprocessing on monopolymer blends of polyhydroxybutyrate (PHB)Polymer TestingDOI: 10.1016/j.polymertesting.2025.108857
KT
Influence of process instabilities and elevated temperatures on mechanical properties of PBF-LB-manufactured polyamide 12Rapid Prototyping JournalDOI: 10.1108/RPJ-08-2024-0335
KT
How Method Matters: The Impact of Material Characterization Techniques on Liquid Silicone Rubber Injection Moulding SimulationsPolymers / Molecular Diversity Preservation InternationalDOI: 10.3390/polym17223086
PH
Imaging magnetic order in a two-dimensional iron-rich phyllosilicateCommunications materialsDOI: 10.1038/s43246-025-00936-7
WW
Unusual hardness and string-like structures relaxation of metallic glass investigated by in-situ synchrotron radiationJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2024.178287
WW
Impact of thermal vibrations on the stability of the FeSn2 intermetallicsIntermetallicsDOI: 10.1016/j.intermet.2025.108755
WW
In situ characterization of phase and microstructural evolution during multi-step heat treatment of an additively manufactured tool steelJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.06.115
ET
Partial discharge analysis of medium-voltage medium-frequency transformersElektrotechnik und InformationstechnikDOI: 10.1007/s00502-025-01364-8
WW
Investigation of the tensile failure mechanism of 316L steel produced by selective laser melting after different heat treatmentsPhysicochemical Mechanics of MaterialsDOI: 10.15407/pcmm2025.05.049
WW
Phase Stability and Inverse Hall-Petch Effect of Severely Deformed and Annealed CrMnFeCoNi High-Entropy AlloyArchives of Metallurgy and MaterialsDOI: 10.24425/amm.2025.154484
WW
Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formationMaterials and DesignDOI: 10.1016/j.matdes.2024.113530
WW
Electrochemical impedance behavior and corrosion resistance of amorphous 316-type stainless steel microfibers in saline environmentMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2025.112178
KT
Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)International Journal of FatigueDOI: 10.1016/j.ijfatigue.2024.108652
WW
The relation of microstructural features to the fatigue crack growth and fracture behavior of a high-speed steelMaterials and DesignDOI: 10.1016/j.matdes.2025.114971
WW
Improved irradiation resistance of high entropy nanolaminates through interface engineeringMaterials FuturesDOI: 10.1088/2752-5724/ada8c5
WW
Aerosol direct writing of titanium oxide nanoparticles synthesized by spark ablationCeramics InternationalDOI: 10.1016/j.ceramint.2025.06.236
WW
Effects of nano-CeO2 particles on the microstructural evolution and tribological performance of laser-deposited Ni45 coatingsSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2025.132539
WW
Impact of annealing and hydrogenation on the superconducting transition temperature of (TiNbMoTaW)Nx high entropy alloy nitride filmsSolid State Sciences : SSSDOI: 10.1016/j.solidstatesciences.2025.107851
WW
Hydrogen permeation into duplex steel under compressive and tensile stresses: Symmetric lattice swelling and asymmetric stress redistributionCorrosion scienceDOI: 10.1016/j.corsci.2025.113282
WW
Simultaneously enhancing strength, ductility, and stiffness of lightweight multicomponent Mg-Al-Zn-Cu-Ce alloysTransactions of Nonferrous Metals Society of China (English Edition)DOI: 10.1016/S1003-6326(25)66878-6
WW
A Comprehensive Methodological Approach Towards the Micromechanical Characterization of Lead-Free Solder JointsJOMDOI: 10.1007/s11837-025-07289-z
WW
Out-of-sync co-evaporation in atom probe tomography: Shifting perspectives on compositional biases in TiC and TiN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2025.132879
WW
Bio-inspired damage-tolerant alumina-based layered ceramics through rapid sinteringJournal of the American Ceramic SocietyDOI: 10.1111/jace.20706
WW
Deformation and dynamic recrystallization behavior during hot compression of Incoloy 028 alloyProgress in Natural Science: Materials InternationalDOI: 10.1016/j.pnsc.2025.03.013
WW
Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure TorsionMetallurgical and Materials Transactions A: Physical Metallurgy and Materials ScienceDOI: 10.1007/s11661-025-07723-6
KT
Evaluation of polymeric binders in 316L stainless steel manufacturing by filament-based MEXProgress in additive manufacturing DOI: 10.1007/s40964-025-01124-2
WW
Ab initio modeling of TWIP and TRIP effects in β‑Ti alloysJournal of materials research (JMR)DOI: 10.1557/s43578-025-01657-w
WW
Improving the elemental and imaging accuracy in atom probe tomography of (Ti,Si)N single and multilayer coatings using isotopic substitution of NUltramicroscopyDOI: 10.1016/j.ultramic.2025.114200
WW
Multilayer design of sustainable multifunctional Zr–Cu–N coatings: A route for enhanced mechanical and antibacterial performanceMaterials and DesignDOI: 10.1016/j.matdes.2025.114037
PH
Imaging junctions in two-dimensional semiconductor nanosheet networksnpj 2D materials and applicationsDOI: 10.1038/s41699-025-00609-6
ME
Long-Term Residual Stress Monitoring via Surface Acoustic Waves Using Piezoelectric Patch TransducersApplied Sciences : open access journalDOI: 10.3390/app152011132
WW
Investigation of chromaticity and mechanical properties of (Cu-Ge)100-xAlx alloys with bimodal-sized intermetallic compoundJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.180562
WW
Structural response of defect-free and pre-cracked high-entropy metallic glasses to ion irradiationJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.05.034
KT
Exploring the miscibility challenges of bio-based PLA/PBAT backbones in aluminium feedstock for metal material extrusion (MMEX)Results in EngineeringDOI: 10.1016/j.rineng.2025.106650
KT
Building From the Ground Up: A Procedural Guide to Locally Controlling Bond Exchange Kinetics in Dynamic Thiol-Thioester NetworksMacromolecular rapid communicationsDOI: 10.1002/marc.202500654
WW
Crack arrest in nanoceramic multilayers via precipitation-controlled sublayer designMaterials and DesignDOI: 10.1016/j.matdes.2025.114159
WW
Enhanced Control of Single Crystalline Ag Dendritic Growth on Al Foil via Galvanic Displacement and Simultaneous Oxidation of D-GlucoseSmall ScienceDOI: 10.1002/smsc.202400478
KT
Effect of thermal aging on responsive polymer coatings used for temperature monitoring in e-vehiclesMonatshefte fur ChemieDOI: 10.1007/s00706-025-03403-8
PH
Natural Alkaloids (Caffeine, Theobromine, and Theophylline) as Dielectric Capping Layers for Gold and Aluminum Gate Electrodes in Low Operating Voltage Organic Field-Effect TransistorsIEEE Journal on Flexible ElectronicsDOI: 10.1109/JFLEX.2025.3539612
KT
Synthesis of guanidine-based salts with benzoate and citrate counterions for application as thermolatent basesMonatshefte fur ChemieDOI: 10.1007/s00706-025-03405-6
WW
Ultrahigh surface area nanoporous carbon for air and water purification: Pushing the boundaries and unveiling the key physicochemical featuresChemical Engineering JournalDOI: 10.1016/j.cej.2025.169457
WW
Impact bending strength and structural properties of hardwood: branch versus stemEuropean Journal of Wood and Wood ProductsDOI: 10.1007/s00107-025-02247-7
WW
Advancing the mechanical performance of chemically complex alloys through strategically engineered bamboo-inspired multi-stage heterostructuresComposites Part B: EngineeringDOI: 10.1016/j.compositesb.2025.112547
WW
Microstructure evolution and corrosion behavior of the Incoloy 028 alloy upon agingCorrosion scienceDOI: 10.1016/j.corsci.2024.112634
WW
Prediction of reversion kinetics in medium Mn steel by linking real experimental data with diffusion simulationMaterials and DesignDOI: 10.1016/j.matdes.2025.114631
WW
Investigation of Ti-Based Alloy Composites Produced by High Pressure TorsionJournal of Materials Engineering and PerformanceDOI: 10.1007/s11665-025-12538-y
WW
Eliminating room-temperature brittleness via introducing residual interface defects to control element diffusion pathwaysMaterials characterizationDOI: 10.1016/j.matchar.2025.115753
WW
Residual Stress Fields of Precracks and Impact on Fracture Mechanics PropertiesFatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structuresDOI: 10.1111/ffe.70069
WW
Wire-Arc directed energy deposition of metastable-β alloy Ti-15 V-3Cr-3Sn-3Al using thick wire feedstock: Microstructure and mechanical responseMaterials and DesignDOI: 10.1016/j.matdes.2025.114757
WW
Cooling rate control combined with refractory Mo and/or V addition to enhance the mechanical properties of CoCrFeMnNi alloyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.03.074
WW
Fatigue crack growth of ITER-grade tungsten in the brittle to ductile transition regimeInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2025.109080
WW
Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constantsMaterials and DesignDOI: 10.1016/j.matdes.2025.113720
WW
Advances in high-strength and high-thermal conductivity cast magnesium alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.180843
KT
3D Printing of Aluminum Alloys via Material Extrusion (MEX) Process: Challenges in Developing Acetone-Soluble Binder SystemsPolymers for Advanced TechnologiesDOI: 10.1002/pat.70194
WW
MnBi phase evolution during magnetic field assisted annealing studied by in-situ high-energy X-ray diffractionJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.183560
WW
Alteration of Phase Transformation Behavior and Prior Austenite Grain Structure Due to Elevated Tramp Element Concentrations in a Hypoeutectoid SteelSteel research internationalDOI: 10.1002/srin.202500172
WW
The impact of carbon felt thickness and de-bundled felt fibers on dye adsorption: The external surface mattersSustainable Chemistry for the EnvironmentDOI: 10.1016/j.scenv.2025.100254
WW
Formation of Micrometer-Sized Textured Hexagonal Silicon Crystals via NanoindentationSmall StructureDOI: 10.1002/sstr.202400552
KT
Phosphoramidates as promising low-loading flame retardants for low density polyethylenePolymer Degradation and StabilityDOI: 10.1016/j.polymdegradstab.2025.111217
WW
Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steelPractical metallography = Praktische MetallographieDOI: 10.1515/pm-2025-0010
WW
Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol ApproachSurfacesDOI: 10.3390/surfaces8010005
WW
Optimization of the Flexible Mesh Support Processing Parameters in Downward Approach Mining Drift by Numerical SimulationProcessesDOI: 10.3390/pr13123933
WW
Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatingsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.01.020
WW
Quantifying grain boundary deformation mechanisms in small-grained metalsNatureDOI: 10.1038/s41586-025-09800-7
KTWW
Photopolymerization and reaction sintering of ZrC/SiC ultra-high-temperature ceramics fabricated by 3D printingCeramics InternationalDOI: 10.1016/j.ceramint.2025.03.141
WW
Mechanical properties of two novel non-equiatomic Zr-Hf-Ti-Cu-Ni-Co-Al High Entropy Alloys with high glass forming abilityJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.180196
KT
Shifting Focus to Quality: An Innovative Modeling Approach Includes Processing History for Rubber Part Quality SimulationPolymersDOI: 10.3390/polym17020149
KT
Mixed mode I/III fatigue behaviour of PolyetheretherketoneEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2025.111057
WW
A New Recycling Technology to Produce Premixed Thermal Insulating Mortars from Polyurethane Waste FoamsPolymersDOI: 10.3390/polym17162233
WW
Synergistic precipitation reactions in a novel high-temperature Ti-alloyScripta materialiaDOI: 10.1016/j.scriptamat.2025.116543
WW
Intragranular strain and mosaicity in Cu thin films during fast thermomechanical fatiguenpj Materials degradationDOI: 10.1038/s41529-025-00629-z
KTWW
Reversible On-Demand Activation of Acid-Catalyzed Dynamic Polymers for Gradient-Driven ReshapingJournal of the American Chemical SocietyDOI: 10.1021/jacs.5c13227
WW
Tailoring microstructure and mechanical properties of sintered Cu nanoparticlesActa materialiaDOI: 10.1016/j.actamat.2025.121501
KTWW
Magnetically switchable micropillars from thiol-acrylate magnetite nanocompositesMonatshefte fur ChemieDOI: 10.1007/s00706-025-03382-w
ME
Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning AlgorithmsMetals : open access journal DOI: 10.3390/met15020194
WW
Laser powder bed fusion vs. single track laser melting of martensitic Ti-Nb: Phase and microstructure formationAdditive ManufacturingDOI: 10.1016/j.addma.2025.104884
KT
Assessment of Biochar for Utilization in Electric Smelting Furnace-Based Ironmaking: Study on Physicochemical Properties and Intrinsic ReactivitySteel research internationalDOI: 10.1002/srin.202500859
WW
Revealing Nanoscale Solute-Rich Clusters in Bulk Metallic Glasses by Atom Probe TomographySmall MethodsDOI: 10.1002/smtd.202500980
WW
Contact damage response of alumina-based layered architectures under different loading configurationsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2024.117037
WW
Sample preparation induced artefacts in soft SAC solders from uncooled and cooled Argon ion millingScientific reportsDOI: 10.1038/s41598-025-25169-z
WW
From nano-twinning to the glide of full dislocations: Micropillar compression tests on silicon up to 900 ◦C☆Materials and DesignDOI: 10.1016/j.matdes.2025.114730
WW
Atomic disorder and thermal stability in laser beam-shape-tailored 3D-Printed Zr-based bulk metallic glass under in-situ heating during high-energy X-ray diffractionMaterials today advancesDOI: 10.1016/j.mtadv.2025.100617
WW
Bridging solution and solid-state mechanism: Confined quasi-solid-state conversion in Li-S batteriesACS Energy LettersDOI: 10.1021/acsenergylett.5c02093
WW
In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue IngrowthACS Applied Materials and InterfacesDOI: 10.1021/acsami.4c12715
WW
Revealing trends in catalytic activity of adatoms for hydrogen adsorption on carbon: A case study of graphene and carbon nanotubeCarbon TrendsDOI: 10.1016/j.cartre.2025.100535
WW
Strength and ductility synergy of SiC reinforced aluminum matrix composites through interface replacement strategyInternational journal of plasticityDOI: 10.1016/j.ijplas.2025.104450
WW
Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energyActa MaterialiaDOI: 10.1016/j.actamat.2025.120774
ME
On the influence of stress gradients on the propagation behaviour of Rayleigh wavesActa AcousticaKTWW
Altering the optical appearance of carbon reinforced polymers on an intrinsic level using Ag and SiO2Proceedings of the Institution of Mechanical Engineers. Part L, Journal of materials: Design and applicationsDOI: 10.1177/14644207251317906
Publications 2024
WW
High-Throughput First-Principles Calculations and Machine Learning of Grain Boundary Segregation in Metals Advanced engineering materialsDOI: 10.1002/adem.202400269
WW
Magnetic moments in CrN-based systems are robust: An ab initio study of alloys and superlatticesSurface & coatings technologyDOI: 10.1016/j.surfcoat.2024.131540
WW
Fracture Toughness Investigations of an Ion-Irradiated Nanocrystalline TiZrNbHfTa Refractory High-Entropy AlloyAdvanced Engineering MaterialsDOI: 10.1002/adem.202400541
ME
Dissolution of Oxide Particles in Multi-component Slags Governed by Diffusive and Convective FluxesMetallurgical and materials transactions. B, Process metallurgy and materials processing scienceDOI: 10.1007/s11663-024-03175-2
WW
Artificial thermal shock cracks in WRe – A proof of concept studyNuclear Materials and EnergyDOI: 10.1016/j.nme.2024.101685
WW
Strong high-density composites from wheat strawComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2024.108533
WW
Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloyingMaterials Science and Engineering: ADOI: 10.1016/j.msea.2024.147757
KT
Nanoparticles bearing germanium based photoinitiators at their surface: Preparation and use in grafting-from photopolymerization reactionsApplied surface scienceDOI: 10.1016/j.apsusc.2024.160035
PHWW
Hydrogen densification in carbon nanopore confinement: Insights from small-angle neutron scattering using a hierarchical contrast modelCarbonDOI: 10.1016/j.carbon.2024.118911
KTPHWW
Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphologyVacuumDOI: 10.1016/j.vacuum.2024.113724
WW
Glass and nanocrystalline phase formation in CuZrAg alloys: Insights from combinatorial thin film libraries studied by mapping synchrotron X-ray diffractionMaterials and DesignDOI: 10.1016/j.matdes.2024.113144
KT
Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of VulcanizatesPolymersDOI: 10.3390/polym16142033
WW
Ab initio study of oxygen vacancy filament formation at Ta/HfO2 interfaceSurfaces and InterfacesDOI: 10.1016/j.surfin.2024.104418
WW
Enhanced thermomechanical fatigue resistance in W10Re alloys: Microstructural and surface engineering approachesNuclear Materials and EnergyDOI: 10.1016/j.nme.2024.101769
KT
Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer wasteJournal of applied polymer scienceDOI: 10.1002/app.55694
KT
Characterization of fracture behavior under impact-like loading conditions of elastomeric grades for high-pressure gas applicationsPolymerDOI: 10.1016/j.polymer.2024.126718
KT
Effect of different weft-knitted structures on the mechanical performance of bio-based flexible compositesComposites Part C: Open AccessDOI: 10.1016/j.jcomc.2024.100436
ET
Optimal speckle size and signal processing for displacement measurements using a 4f optical setupMeasurement science and technologyDOI: 10.1088/1361-6501/ad3e9f
WW
Understanding the origin of lithium dendrite branching in Li6.5La3Zr1.5Ta0.5O12 solid-state electrolyte via microscopy measurementsNature CommunicationsDOI: 10.1038/s41467-024-52412-4
WW
Fatigue Performance of Ti-6Al-4V Processed by Wire-Arc Directed Energy DepositionJOMDOI: 10.1007/s11837-024-06956-x
WW
fs-laser preparation of half grid specimens for atom probe tomography and transmission electron microscopyMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2024.108672
PHWW
From abandoned mines to carbon sinks: Assessing the CO2 storage capacity of Austrian low-rank coal depositsInternational journal of coal geologyDOI: 10.1016/j.coal.2024.104495
WW
How Cracks Induced by Straining Influence the Tribological Properties of Mo Films Deposited on Polyimide SubstratesMetals : open access journal DOI: 10.3390/met14030295
WW
Influence of deformation, microstructure, and temperature on the fracture resistance of technically pure tungstenMaterials Science and Engineering: ADOI: 10.1016/j.msea.2024.146631
KT
Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheresActa astronauticaDOI: 10.1016/j.actaastro.2024.05.017
KTPH
Thermally-activated locomotion of a bilayer polymer actuatorSmart Materials in ManufacturingDOI: 10.1016/j.smmf.2024.100047
WW
Microstructure evolution and mechanical properties of a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy processed by high-pressure torsionMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2024.147139
KT
Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis Journal of composites scienceDOI: 10.3390/jcs8040126
KT
Analysis of different polypropylene waste bales: Evaluation of the source material for PP recyclingWaste Management and ResearchDOI: 10.1177/0734242X241227369
WW
Asymmetric supercapacitors based on biomass-derived porous activated carbon (PAC)/1D manganese oxide (MnO2) electrodes with high power and energy densitiesMaterials science and engineering B (Solid-state materials for advanced technology)DOI: 10.1016/j.mseb.2024.117368
WW
Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via XolographyOpen ceramicsDOI: 10.1016/j.oceram.2024.100655
WW
Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer filmsActa MaterialiaDOI: 10.1016/j.actamat.2024.119979
KT
Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stabilityMacromoleculesDOI: 10.1021/acs.macromol.4c00207
KT
Data-driven evaluation of the Paris\textquoteright law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimationEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2024.110540
WW
Descriptors based on the density of states for efficient machine learning of grain-boundary segregation energiesComputational materials scienceDOI: 10.1016/j.commatsci.2024.113493
WW
Hydrogen penetration into the NiTi superelastic alloy investigated in-situ by synchrotron diffraction experimentsActa materialiaDOI: 10.1016/j.actamat.2024.120217
KT
Surface Functionalization of Activated Carbon: Coupling of 3-(Aminopropyl)trimethoxysilane and (3-Glycidyloxypropyl)trimethoxysilaneC-Journal of Carbon ResearchDOI: 10.3390/c10040104
KTWW
Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfacesMaterials and DesignDOI: 10.1016/j.matdes.2024.112994
KT
Light-Driven, Reversible Spatiotemporal Control of Dynamic Covalent PolymersAdvanced materialsDOI: 10.1002/adma.202411307
WW
Elucidating effects of Eu and P on solidification and precipitation of Al-7Si-0.3Mg based alloys refined by Ta and TiB2Journal of alloys and compoundsDOI: 10.1016/j.jallcom.2023.173343
ME
Revisiting the Extension of SGTE Heat Capacity Data to Zero Kelvin: Combining Classical Fit Polynomials with Debye–Einstein FunctionsJournal of phase equilibria and diffusionDOI: 10.1007/s11669-024-01159-y
KT
Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of woodSustainable Materials and TechnologiesDOI: 10.1016/j.susmat.2024.e00936
WW
Semi-analytical and experimental heat input study of additively manufactured Zr-based bulk metallic glass: Insights into nano- and global-scale relaxation and crystallizationAdditive ManufacturingDOI: 10.1016/j.addma.2024.104295
WW
Removal of Crystal Violet Dye from Aqueous Solutions through Adsorption onto Activated Carbon FabricsC – journal of carbon researchDOI: 10.3390/c10010019
WW
Influence of multiple detection events on compositional accuracy of TiN coatings in atom probe tomographySurface & coatings technologyDOI: 10.1016/j.surfcoat.2023.130318
WW
On the impact of nitrogen and aluminum doping on silicon carbide polytype stability: Insights from first principle calculationsJournal of the American Ceramic SocietyDOI: 10.1111/jace.20284
KT
Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio fillerInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2024.10.136
WW
Turning of high entropy alloy into high entropy carbides by modifying carbon content during reactive sinteringCeramics InternationalDOI: 10.1016/j.ceramint.2024.01.438
KT
Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applicationsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.04.133
KT
Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors Journal of polymer scienceDOI: 10.1002/pol.20240121
WW
Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloysMaterials characterizationDOI: 10.1016/j.matchar.2024.114154
WW
Structure–Property Relations in Pb-Supersaturated Metastable Sn-Rich Pb-Sn AlloysMetallurgical and materials transactions. A, Physical metallurgy and materials science DOI: 10.1007/s11661-024-07362-3
KT
Functionalization of PTFE substrates with quaternary ammonium groups: An approach towards anion conducting propertiesApplied surface scienceDOI: 10.1016/j.apsusc.2024.160084
KT
Deformation and fracture of lithosphere-inspired polymeric multi-layer compositesResults in EngineeringDOI: 10.1016/j.rineng.2024.103519
WW
Exploring Refinement Characteristics in FeTi–Cux Composites: A Study of Localization and Abrasion ConstraintsAdvanced Engineering MaterialsDOI: 10.1002/adem.202400593
WW
Insight into Carbon Black and Silica Fume as Cement Additives for Geoenergy Wells: Linking Mineralogy to Mechanical and Physical PropertiesC – journal of carbon researchDOI: 10.3390/c10030071
KT
Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitationJournal of applied polymer scienceDOI: 10.1002/app.55024
WW
Strain Field Around Individual Dislocations Controls FailureSmall MethodsDOI: 10.1002/smtd.202400654
WW
Unveiling the mechanism of deformation‑induced supersaturationScientific reportsDOI: 10.1038/s41598-024-66164-0
WW
The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scalingJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2023.09.018
WW
Extracting high-temperature stress–strain curves from a 1.2 μm silicon film using spherical nanoindentationThin solid filmsDOI: 10.1016/j.tsf.2024.140597
WW
Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etchingJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2024.174569
WW
Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistanceJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2023.11.009
WW
Mechanical processing and thermal stability of the equiatomic high entropy alloy TiVZrNbHf under vacuum and hydrogen pressureApplied physics lettersDOI: 10.1063/5.0204628
KT
Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviourMaterials Science and Engineering: ADOI: 10.1016/j.msea.2024.147270
KT
Fatigue investigations of elastomers developed for high-pressure hydrogen gas environmentsInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2024.108563
KT
Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating PropertiesCoatingsDOI: 10.3390/coatings14111365
WW
Exploring the fracture toughness and fatigue crack growth behavior of MoRe alloysInternational Journal of Refractory Metals and Hard MaterialsDOI: 10.1016/j.ijrmhm.2024.106969
KT
Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement Journal of composites scienceDOI: 10.3390/jcs8100396
WW
Interface engineering at the nanoscale: Synthesis of low-energy boundaries Advanced engineering materialsDOI: 10.1002/adem.202400595
WW
Tensile strength prediction of steel sheets: An insight into data-driven models, dimensionality reduction, and feature importanceModelling and simulation in materials science and engineeringDOI: 10.1088/1361-651X/ad6fc0
KT
Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysisPolymerDOI: 10.1016/j.polymer.2024.127661
KT
Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processesAdvanced Manufacturing: Polymer and Composites ScienceDOI: 10.1080/20550340.2024.2379205
KT
Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditionsPolymer TestingDOI: 10.1016/j.polymertesting.2024.108444
WW
Energy Absorption and Beam Damage during Microfocus Synchrotron X-ray Diffraction The journal of physical chemistry lettersDOI: 10.1021/acs.jpclett.4c00497
WW
Nanocomposite versus solid solution formation in the TiSiN systemActa materialiaDOI: 10.1016/j.actamat.2024.120063
KT
Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing MaterialsDOI: 10.3390/ma17081890
KT
Spritzgießcompoundieren im Recycling von Post-Consumer PP AbfällenJahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus WW
Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysisMarine and petroleum geologyDOI: 10.1016/j.marpetgeo.2024.107083
WW
Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatingsBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-024-01481-5
WW
Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steelMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2024.146220
WW
LITHOZ: Multi-Material 3D PrintingCeramic applicationsWW
Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delaminationActa MaterialiaDOI: 10.1016/j.actamat.2024.120465
ET
Analysis of a capacitance tomography system for object detection and localization Untersuchung eines Kapzitätstomografiesystems zur Objekterkennung und -lokalisierungTechnisches MessenDOI: 10.1515/teme-2024-0013
KT
Tensile properties of flexible composites with knitted reinforcements from various yarn materialsPolymer CompositesDOI: 10.1002/pc.27942
ME
Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurementsMaterialiaDOI: 10.1016/j.mtla.2024.102094
WW
Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolutionScripta MaterialiaDOI: 10.1016/j.scriptamat.2024.116142
ME
On the coupling of Hamilton's principle and thermodynamic extremal principlesJournal of the mechanics and physics of solidsDOI: 10.1016/j.jmps.2024.105633
KT
Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysisPolymer TestingDOI: 10.1016/j.polymertesting.2024.108340
WW
A carbon-stabilized austenitic steel with lower hydrogen embrittlement susceptibilitySteel research internationalDOI: 10.1002/srin.202300372
WW
State-of-the-art and future directions of fs-laser assisted specimen preparation techniques for atom probe tomography measurementsMicroscopy and microanalysisDOI: 10.1093/mam/ozae044.045
WW
Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallabyActa biomaterialiaDOI: 10.1016/j.actbio.2024.07.004
WW
Optimizing methane plasma pyrolysis for instant hydrogen and high-quality carbon productionInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.07.129
WW
Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterionEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2024.110121
KT
UV lamp spectral effects on the aging behavior of encapsulants for photovoltaic modulesSolar energy materials and solar cellsDOI: 10.1016/j.solmat.2023.112674
PHWW
The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN NanoplateletsNanomaterialsDOI: 10.3390/nano14070601
WW
Saturation of grain fragmentation upon severe plastic Deformation: Fact or fiction? Advanced engineering materialsDOI: 10.1002/adem.202400578
WW
Automatic and time-resolved determination of fracture characteristics from in situ experimentsMaterials & designDOI: 10.1016/j.matdes.2024.113038
KT
Investigation into the state of cure of elastomers through nanoindentationPolymer TestingDOI: 10.1016/j.polymertesting.2024.108417
MEWW
Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitizationMaterials characterizationDOI: 10.1016/j.matchar.2023.113554
PHWW
Single-stack multilayer infrared mirrors with selectable higher-order interference peaksApplied OpticsDOI: 10.1364/AO.531656
PHWW
Optimizing Size and Number Density of Al3Zr Dispersoids in Al–Zn–Mg–Cu AlloysAdvanced Engineering MaterialsDOI: 10.1002/adem.202400353
WW
Grain boundary segregation for the Fe-P system: Insights from atomistic modeling and Bayesian inferenceActa materialiaDOI: 10.1016/j.actamat.2024.120215
KT
Dual-vat photopolymerization 3D printing of vitrimersAdditive ManufacturingDOI: 10.1016/j.addma.2023.103930
WW
Novel ambient-condition solid-state synthesis route of nanocrystalline TiN thin films via spark plasma ablation depositionCeramics InternationalDOI: 10.1016/j.ceramint.2024.08.028
KT
Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimersApplied researchDOI: 10.1002/appl.202300133
KT
Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical glovesJournal of applied polymer scienceDOI: 10.1002/app.55498
WW
Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2024.10.186
WW
Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayersMaterials characterizationDOI: 10.1016/j.matchar.2024.113973
ET
Simulating Rolling Element Bearing Defects in Induction MachinesPower Electronics and Drives (PEAD) DOI: 10.2478/pead-2024-0033
KT
Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate\textquoterights PropertiesJournal of polymers and the environmentDOI: 10.1007/s10924-024-03425-z
KT
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled PolypropyleneACS Sustainable Chemistry and EngineeringDOI: 10.1021/acssuschemeng.4c04645
WW
Perspective on pathways towards responsible surface engineeringSurface & coatings technologyDOI: 10.1016/j.surfcoat.2024.131486
KTWW
Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)International Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.09.016
KT
Influence of Anion and Cation Structures on Ionic Liquid Epoxy-Based VitrimersACS applied polymer materialsDOI: 10.1021/acsapm.3c02293
KT
Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structureSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2023.130303
WW
Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis Geomechanics and geophysics for geo-energy and geo-resourcesDOI: 10.1007/s40948-024-00864-9
KTWW
In situ and ex situ quantification of nanoparticle fluxes in magnetron sputter inert gas condensation: A Cu nanoparticle case studyJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0003283
ET
A Comparative Analysis of Efficiency and Losses in a 5 kW Hybrid and Full-SiC Converter, for PV Applications in AustriaEnergiesDOI: 10.3390/en17225600
ME
Extended Regression Analysis for Debye–Einstein Models Describing Low Temperature Heat Capacity Data of SolidsEntropyDOI: 10.3390/e26060452
WW
Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramicsDental MaterialsDOI: 10.1016/j.dental.2023.10.025
ET
Analysis of electrical resistance tomography measurements for fast force localizationTechnisches MessenDOI: 10.1515/teme-2024-0010
WW
Thermal shock resistant 3D-printed ceramic components through spatially tailored porosityAdditive ManufacturingDOI: 10.1016/j.addma.2024.104582
WW
Novel Fe-Mo intermetallic composite synthesized via diffusional-displacive mixed-mode transformationMaterials characterizationDOI: 10.1016/j.matchar.2024.114287
ET
Optimized Integration of Medium-Voltage Multimegawatt DC Charging Stations: Concepts, Guidelines and AnalysisWorld electric vehicle journalDOI: 10.3390/wevj15100450
KT
Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminiumResults in EngineeringDOI: 10.1016/j.rineng.2024.102692
WW
Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approachMaterials and DesignDOI: 10.1016/j.matdes.2024.113433
PHWW
Corrigendum to “From abandoned mines to carbon sinks: Assessing the CO2 storage capacity of Austrian low-rank coal deposits” [International Journal of Coal Geology 286 (2024) 1–13/104495]International journal of coal geologyDOI: 10.1016/j.coal.2024.104520
WW
Ceramic materials as an alternative for conventional spark plug electrodesInternational journal of applied ceramic technologyDOI: 10.1111/ijac.14865
WW
Hardness and fracture toughness enhancement in transition metal diboride multilayer films with structural variationsMaterialiaDOI: 10.1016/j.mtla.2024.102070
WW
Scalable synthesis of biomass-derived three-dimensional hierarchical porous activated carbons for electrochemical energy storage and hydrogen physisorption Journal of energy storageDOI: 10.1016/j.est.2024.112085
ME
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot weldsWelding in the worldDOI: 10.1007/s40194-024-01696-7
WW
Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical propertiesInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2024.106890
PH
Influence of broad ion beam polishing on the surface roughness of hydrated cement paste and its implications on microstructural analysisCement and concrete researchDOI: 10.1016/j.cemconres.2024.107555
WW
Strength testing of additive manufactured ceramics – A round robin using the CharAM-methodologyOpen ceramicsDOI: 10.1016/j.oceram.2024.100557
WW
Hydrogen induced changes in the phase composition and micro-structure of downhole cements: Fundamental research within the context of underground hydrogen storageInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2024.09.449
KT
Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement ProcessJournal of Manufacturing and Materials ProcessingDOI: 10.3390/jmmp8030091
WW
Towards high strength SrTiO3-based composites fabricated at room temperatureJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2024.116782
WW
Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experimentActa materialiaDOI: 10.1016/j.actamat.2024.119741
PH
Multi-Layer Palladium Diselenide as a Contact Material for Two-Dimensional Tungsten Diselenide Field-Effect TransistorsNanomaterialsDOI: 10.3390/nano14050481
KT
Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection mouldingJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2024.02.163
ME
A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solidsInternational journal of plasticityDOI: 10.1016/j.ijplas.2024.104131
WW
Annealing activated substrate element diffusion and its influence on the microstructure and mechanical properties of CVD TiN/TiCN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2024.131079
KT
Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced compositesJournal of Reinforced Plastics and CompositesDOI: 10.1177/07316844241295848
KT
Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetrationTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2024.104834
WW
Refined cyclic R-curve determination through residual crack tip stress reduction by annealingInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2024.108480
WW
Evaluating High-Pressure Torsion Scale-UpAdvanced Engineering MaterialsDOI: 10.1002/adem.202400175
WW
Unveiling the Effect of Grain Size on Biodegradation of MagnesiumAdvanced Engineering MaterialsDOI: 10.1002/adem.202401605
ME
Modeling solute drag during austenite–ferrite transformation with ab initio binding energiesMaterialiaDOI: 10.1016/j.mtla.2024.102128
KTWW
Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputteringJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0004162
KT
Cationic UV-curing of bio-based epoxidized castor oil vitrimers with electrically conductive propertiesReactive & functional polymersDOI: 10.1016/j.reactfunctpolym.2024.105936
KT
Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical PropertiesAdvanced Engineering MaterialsDOI: 10.1002/adem.202301699
WW
3D-printed alumina-based ceramics with spatially resolved porosityInternational journal of applied ceramic technologyDOI: 10.1111/ijac.14512
WW
Design and characterization of novel Zr-Al-Fe-Y metallic glasses with nanoscale phase separationMaterialiaDOI: 10.1016/j.mtla.2024.102104
ETKT
Design of Reversible Adhesives by Using a Triple Function of Ionic LiquidsMacromolecular materials and engineeringDOI: 10.1002/mame.202400011
KT
Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniquesRadiation physics and chemistryDOI: 10.1016/j.radphyschem.2024.111846
WW
On the fatigue crack growth behavior of nanocrystalline CrMnFeCoNiInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2024.108530
WW
Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy Advanced engineering materialsDOI: 10.1002/adem.202400255
WW
Micromechanical Properties of Micro- and Nanocrystalline CVD Diamond Thin Films with Gradient Microstructures and StressesJournal of Vacuum Science and Technology A: Vacuum, Surfaces and FilmsDOI: 10.1116/6.0003235
WW
Coupling structural, chemical composition and stress fluctuations with relaxation dynamics in metallic glassesActa MaterialiaDOI: 10.1016/j.actamat.2024.120033
PH
All van der Waals Semiconducting PtSe2 Field Effect Transistors with Low Contact Resistance Graphite ElectrodesNano LettersDOI: 10.1021/acs.nanolett.4c00956
KTWW
Microscale manipulation of bond exchange reactions in photocurable vitrimers with a covalently attachable photoacid generatorChemical scienceDOI: 10.1039/d4sc04932b
KT
ConForce: Computation of configurational forces for FEM resultsSoftwareXDOI: 10.1016/j.softx.2024.101718
WW
Scaffold microstructure evolution via freeze-casting and hydrothermal phase transformation of calcium phosphateJournal of the American Ceramic SocietyDOI: 10.1111/jace.20053
WW
Ab initio framework for deciphering trade-off relationships in multicomponent alloysnpj computational materialsDOI: 10.1038/s41524-024-01342-2
WW
Additive manufacturing of 3D yttria-stabilized zirconia microarchitecturesMaterials and DesignDOI: 10.1016/j.matdes.2024.112701
WW
Predictive Model for Catalytic Methane PyrolysisJournal of physical chemistry C (C, Nanomaterials and interfaces)DOI: 10.1021/acs.jpcc.4c01690
WW
Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packagingMaterials Science and Engineering: ADOI: 10.1016/j.msea.2024.146316
ET
Assessment of technology-based options for climate neutrality in Austrian manufacturing industryHeliyonDOI: 10.1016/j.heliyon.2024.e25382
KT
Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherendsJournal of composite materialsDOI: 10.1177/00219983241231062
KT
Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber contentMonatshefte fur ChemieDOI: 10.1007/s00706-023-03168-y
KT
Evaluation of existing and introduction of new incremental crack propagation approaches in FEMTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2024.104452
KT
Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative studyRSC AdvancesDOI: 10.1039/D4RA01380H
WW
Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited FilmNanomaterialsDOI: 10.3390/nano15010043
KT
Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated TranscarbamoylationPolymersDOI: 10.3390/polym16192799
WW
Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insightsActa materialiaDOI: 10.1016/j.actamat.2024.120044
KT
3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive GlassPolymersDOI: 10.3390/polym16243614
WW
Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)Carbohydrate polymer technologies and applicationsDOI: 10.1016/j.carpta.2024.100527
WW
Machine learning assisted calibration of PVT simulations for SiC crystal growthCrystEngCommDOI: 10.1039/d4ce00866a
KTWW
Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface propertiesReactive & functional polymersDOI: 10.1016/j.reactfunctpolym.2024.105972
KT
Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfacesSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2024.131040
KTWW
Sputter deposited silver niobate thin films: Pathway towards phase purityThin solid filmsDOI: 10.1016/j.tsf.2024.140505
WW
Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion processMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2024.146102
KT
The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherendsMechanics of advanced materials and structuresDOI: 10.1080/15376494.2023.2299936
WW
The contribution of ceramography to the development of ceramic spark plug electrode materials for large gas enginesPractical MetallographyDOI: 10.1515/pm-2024-0002
WW
How to catch a shear band and explain plasticity of metallic glasses with continuum mechanicsNature CommunicationsDOI: 10.1038/s41467-024-49829-2
KT
Design of photocurable thiol-epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printingReactive and Functional PolymersDOI: 10.1016/j.reactfunctpolym.2024.106085
KT
Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiberMeasurementDOI: 10.1016/j.measurement.2024.115404
KT
A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcementsComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2024.108592
WW
Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper NanocompositesJOMDOI: 10.1007/s11837-023-06348-7
WW
Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatmentJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2024.12.169
WW
A rapid heat treatment for nanocrystallization of amorphous Fe75.1Cu1Nb1.5Si15.5B6.9 and Fe83Cu1Nb4B12 tape wound coresJournal of magnetism and magnetic materialsDOI: 10.1016/j.jmmm.2024.171797
WW
The ball-on-three-balls strength test: In-situ testing through X-ray radiography and tomographyOpen ceramicsDOI: 10.1016/j.oceram.2023.100514
WW
Microplastic response of 2PP-printed ceramicsJournal of the American Ceramic SocietyDOI: 10.1111/jace.19849
PH
Black goes green: single-step solvent exchange for sol-gel synthesis of carbon spherogels as high-performance supercapacitor electrodesEnergy AdvancesDOI: 10.1039/d3ya00480e
KT
MetamaterialFinder: A software framework for discovering and analyzing mechanical metamaterials based on simple closed curvesAdvances in Engineering SoftwareDOI: 10.1016/j.advengsoft.2024.103626
WW
Backside metallization affects residual stress and bending strength of the recast layer in laser-diced SiMaterials Science in Semiconductor ProcessingDOI: 10.1016/j.mssp.2024.108579
KT
Wavelength-Dependent Dynamic Behavior in Thiol-Ene Networks Based on Disulfide ExchangeJournal of the American Chemical SocietyDOI: 10.1021/jacs.4c13735
KT
M5 — Mars Magnetospheric Multipoint Measurement Mission: A multi-spacecraft plasma physics mission to MarsAdvances in Space ResearchDOI: 10.1016/j.asr.2023.11.032
WW
Plasma-Treated Cobalt-Doped Nanoporous Graphene for Advanced Electrochemical ApplicationsC – journal of carbon researchDOI: 10.3390/c10020031
WW
Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagramWelding in the worldDOI: 10.1007/s40194-024-01904-4
WW
Short-Time Magnetron Sputtering for the Development of Carbon–Palladium NanocompositesNanomaterialsDOI: 10.3390/nano14020164
WW
Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls testJournal of non-crystalline solidsDOI: 10.1016/j.jnoncrysol.2024.123067
WW
Site-specific femtosecond laser ablation: The pathway to high-throughput atom probe tomography characterizationMaterials characterizationDOI: 10.1016/j.matchar.2024.114618
KT
Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion MouldingJournal of Manufacturing and Materials ProcessingDOI: 10.3390/jmmp8020081
ET
Innovationen im Bereich der InstandhaltungETR Eisenbahntechnische RundschauPH
Combined Fe and Sr refining of Al-Si melt strategy for fabrication of hierarchical structure Si anodesChemical Engineering JournalDOI: 10.1016/j.cej.2024.151488
KT
Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality predictionJournal of applied polymer scienceDOI: 10.1002/app.54901
WW
Fracture toughness of Ca-, Sr-, and Ba-aluminoborosilicate glassesJournal of the American Ceramic SocietyDOI: 10.1111/jace.19488
WW
Equiaxed microstructure design enables strength-ductility synergy in the eutectic high-entropy alloyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2024.09.064
KT
Three-dimensional mechanical metamaterial with tunable engineering constants in a broad rangeResults in EngineeringDOI: 10.1016/j.rineng.2024.102860
KT
An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretizationAdvances in Engineering SoftwareDOI: 10.1016/j.advengsoft.2024.103817
ME
Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulationProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid TransitDOI: 10.1177/09544097231171742
WW
Possible charge ordering and anomalous transport in graphene/graphene quantum dot heterostructureJournal of physics (Condensed matter)DOI: 10.1088/1361-648X/ad31bf
KT
Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection MoldingApplied Sciences (Switzerland)DOI: 10.3390/app14135638
WW
Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing GeometriesJOMDOI: 10.1007/s11837-024-06437-1
KT
Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materialsJournal of Applied Polymer ScienceDOI: 10.1002/app.56074
KT
Near-infrared spectroscopy in resin transfer molding—determination of the degree of cureInternational Journal of Advanced Manufacturing TechnologyDOI: 10.1007/s00170-024-13671-z
WW
A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternativeActa materialiaDOI: 10.1016/j.actamat.2024.120113
KT
Efficient surface defect detection in industrial screen printing with minimized labeling effort Integrated computer-aided engineeringDOI: 10.3233/ICA-240742
ET
An Experimental Electrothermomechanical Characterization of Pipe Steels within Elastic–Plastic Range Based on Resistivity Measurement for Oil Country Tubular GoodsJournal of Materials Engineering and PerformanceDOI: 10.1007/s11665-024-10363-3
KT
Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured compositesResults in EngineeringDOI: 10.1016/j.rineng.2024.103276
Publications 2023
KT
Computational modelling of the separation of molten polymer blends by a centrifugal techniqueJournal of polymer researchDOI: 10.1007/s10965-023-03682-x
WW
Exploring the mechanical properties of additively manufactured carbonrich zirconia 3D microarchitecturesMaterials and DesignDOI: 10.1016/j.matdes.2023.112142
KT
RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area MethodThe journal of open source softwareDOI: 10.21105/joss.04763
WW
Radionuclide removal from aqueous solutions using oxidized carbon fabricsMaterialsDOI: 10.3390/ma16237479
WW
Fine-grained aluminium crossover alloy for high-temperature sheet formingActa materialiaDOI: 10.1016/j.actamat.2023.118952
WW
Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungstenActa MaterialiaDOI: 10.1016/j.actamat.2023.118878
MEWW
Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au systemActa materialiaDOI: 10.1016/j.actamat.2022.118577
KT
Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problemsMaterials and DesignDOI: 10.1016/j.matdes.2023.111958
KT
Determination of creep crack growth kinetics of ABS via the C* approach at different temperaturesResults in EngineeringDOI: 10.1016/j.rineng.2023.101481
WW
Interstitial segregation has the potential to mitigate liquid metal embrittlement in ironAdvanced materialsDOI: 10.1002/adam.202211796
WW
Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-PolymerizationApplied Sciences (Switzerland)DOI: 10.3390/app13063974
WW
Direct observation of crack arrest after bridge notch failure: A strategy to increase statistics and reduce FIB-artifacts in micro-cantilever testingMaterials and DesignDOI: 10.1016/j.matdes.2023.112188
WW
Synergistic enhancement of hydrogen interactions in palladium-gold-silicon metallic glass on multilayered grapheneJournal of Materials Chemistry ADOI: 10.1039/D3TA01734F
WW
Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactorsScripta MaterialiaDOI: 10.1016/j.scriptamat.2023.115771
PH
Are SAXS and SANS suitable to extract information on the role of water for electric-double-layer formation at the carbon-aqueous-electrolyte interface?Faraday DiscussionsDOI: 10.1039/D3FD00124E
WW
On energetics of allotrope transformations in transition-metal diborides via plane-by-plane shearingVacuumDOI: 10.1016/j.vacuum.2023.112329
KT
Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01Results in EngineeringDOI: 10.1016/j.rineng.2023.101484
KT
Concepts towards bio-inspired multilayered polymer-compositesProcedia Structural IntegrityDOI: 10.1016/j.prostr.2023.07.018
KT
A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerizationEuropean polymer journalDOI: 10.1016/j.eurpolymj.2022.111700
WW
Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approachesDefence TechnologyDOI: 10.1016/j.dt.2022.11.012
ET
Machine learning driven prediction of mechanical properties of rolled aluminum and development of an in-situ quality control method based on electrical resistivity measurementJournal of manufacturing processesDOI: 10.1016/j.jmapro.2023.09.058
WW
Toxic element-free Ti-based metallic glass ribbons with precious metal additionsMaterials today advancesDOI: 10.1016/j.mtadv.2023.100392
WW
The effect of liquid phase chemistry on the densification and strength of cold sintered ZnOJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.11.071
WW
Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloysActa MaterialiaDOI: 10.1016/j.actamat.2023.119160
PH
Revision of the edge channel picture for the integer quantum Hall effectResults in PhysicsDOI: 10.1016/j.rinp.2023.106381
WW
Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testingMaterials and DesignDOI: 10.1016/j.matdes.2023.112329
KT
Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulationJournal of coatings technology and researchDOI: 10.1007/s11998-023-00792-5
KT
The use of a sulfonium-based photoacid generator in thiol-ene photopolymers for the controlled activation of transesterification through chemical amplificationPolymer ChemistryDOI: 10.1039/d3py01106b
WW
Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voidingActa MaterialiaDOI: 10.1016/j.actamat.2023.118961
WW
Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements Advanced engineering materialsDOI: 10.1002/adem.202200951
WW
Superconductivity in medium- and high-entropy alloy thin films: Impact of thickness and external pressurePhysical review : B, Condensed matter and materials physicsDOI: 10.1103/PhysRevB.107.024505
KTWW
Annealing effects on Al/polyimide adhesion in flexible optical solar reflectorsIOP Conference Series: Materials Science and EngineeringDOI: 10.1088/1757-899X/1287/1/012006
ET
Messsystem zur Dehnungsmessung von Faserwerkstoffen basierend auf subjektiven Laser-Speckle-MusternTechnisches MessenDOI: 10.1515/teme-2023-0148
WW
Parameters influencing the fracture of Mo films and their wider significanceMRS AdvancesDOI: 10.1557/s43580-023-00612-3
WW
Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applicationsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2023.10.163
PH
Probing Magnetic Ordering in Air Stable Iron‐Rich Van der Waals MineralsAdvanced physics researchDOI: 10.1002/apxr.202300070
WW
Synthesis and mechanical properties of co-deposited W nanoparticle and ZrCuAg metallic glass thin film compositesThin solid filmsDOI: 10.1016/j.tsf.2023.139822
KT
Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing TechnologyJournal of Materials Engineering and PerformanceDOI: 10.1007/s11665-023-08207-7
WW
A novel test specimen for strength testing of ceramics for additive manufacturingOpen ceramicsDOI: 10.1016/j.oceram.2023.100410
ET
Estimators of tissue absorption parameters power-law prefactor and power-law exponent from medical ultrasonic imagesTechnisches MessenDOI: 10.1515/teme-2023-0090
WW
On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio studyActa materialiaDOI: 10.1016/j.actamat.2023.118951
KT
Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensorsProgress in organic coatingsDOI: 10.1016/j.porgcoat.2023.107444
WW
Machine learning mechanical properties of steel sheets from an industrial production routeMaterialsDOI: 10.1016/j.mtla.2023.101810
WW
Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlationNuclear Materials and EnergyDOI: 10.1016/j.nme.2023.101470
KT
Comparing crack density and dissipated energy as measures for off-axis damage in composite laminatesInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2022.107486
WW
Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping TechnologyAdvanced functional materialsDOI: 10.1002/adfm.202311118
KT
Experimental validation of a new adaptable LCM mold filling softwareAdvanced Manufacturing: Polymer and Composites ScienceDOI: 10.1080/20550340.2023.2282310
WW
Thermal stability of MoNbTaTiW, MoNbTaVW and CrMoNbTaW thin films deposited by high power impulse magnetron sputteringSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.129189
WW
Spontaneous formation of carbon dots helps to distinguish molecular fluorophores speciesApplied surface scienceDOI: 10.1016/j.apsusc.2022.155536
KT
The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditionsCorrosion scienceDOI: 10.1016/j.corsci.2023.111118
KT
Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter FittingPolymersDOI: 10.3390/polym15143147
KT
Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: ErgebnisberichtBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01406-8
KT
Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replicationAdvanced Manufacturing: Polymer and Composites ScienceDOI: 10.1080/20550340.2023.2263828
KT
Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal PhotoreactionsMacromolecular rapid communicationsDOI: 10.1002/marc.202200586
WW
Nanoindentation creep of supercrystalline nanocompositesMaterials and DesignDOI: 10.1016/j.matdes.2023.112000
WW
From unlikely pairings to functional nanocomposites: FeTi–Cu as a model systemMaterials today advancesDOI: 10.1016/j.mtadv.2023.100433
PHWW
On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloyIntermetallicsDOI: 10.1016/j.intermet.2023.107962
KT
Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditionsPolymer TestingDOI: 10.1016/j.polymertesting.2023.108207
WW
Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steelsJournal of materials scienceDOI: 10.1007/s10853-023-08472-w
WW
Feasibility study on electrically conductive joining of MoSi2 electrodes for spark plugsInternational journal of applied ceramic technologyWW
Influence of MnS inclusion characteristics on generation of white etching cracks in 100Cr6 bearing steelWearDOI: 10.1016/j.wear.2023.205129
WW
Rejuvenation engineering in metallic glasses by complementary stress and structure modulationNPG Asia MaterialsDOI: 10.1038/s41427-023-00509-5
KT
Synthesis and characterization of bio-based transesterification catalysts for green 3D-printable dynamic photopolymersPolymer ChemistryDOI: 10.1039/d3py00989k
WW
Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatingsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2022.106025
KT
Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphologyTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2023.104032
KT
On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene PhotopolymersAngewandte Chemie - International EditionDOI: 10.1002/anie.202311341
WW
Oxidation behavior of a cathodic arc evaporated Cr0.69Ta0.20B0.11N coatingJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0002356
WW
High density of stacking faults strengthened TaN/TiN multilayerActa materialiaDOI: 10.1016/j.actamat.2023.119027
PH
Drying of Hierarchically Organized Porous Silica Monoliths–Comparison of Evaporative and Supercritical DryingGels : open access physical and chemical gels journalDOI: 10.3390/gels9010071
KT
Pack2theLoop – Gemeinsam zum geschlossenen Kreislauf für Polyolefin VerpackungenPack & Log – die Fachzeitschrift für Verpackung & IntralogistikWW
Phase equilibria in the Ti-Al-W system between 800 and 1300 ◦CMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2023.106291
WW
Phosphorus and transition metal co-segregation in ferritic iron grain boundaries and its effects on cohesionActa materialiaDOI: 10.1016/j.actamat.2023.118850
PH
Photoinduced edge-specific nanoparticle decoration of two-dimensional tungsten diselenide nanoribbonsCommunications chemistryDOI: 10.1038/s42004-023-00975-6
KT
Solution-Processable Cu3BiS3 Thin Films: Growth Process Insights and Increased Charge Generation Properties by Interface ModificationACS Applied Materials and InterfacesDOI: 10.1021/acsami.3c10297
WW
Temperature dependence of solute segregation energies at W GBs from first principlesScripta materialiaDOI: 10.1016/j.scriptamat.2022.115059
WW
Synthesis of crystalline silver niobate thin films opening pathways for future process developmentVacuumDOI: 10.1016/j.vacuum.2023.112077
PH
Pinaceae Pine Resins (Black Pine, Shore Pine, Rosin, and Baltic Amber) as Natural Dielectrics for Low Operating Voltage, Hysteresis-Free, Organic Field Effect TransistorsGlobal challengesDOI: 10.1002/gch2.202300062
WW
Scaling up the cold sintering process of ceramicsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2023.04.061
WW
Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses? MaterialsDOI: 10.3390/ma16031260
WW
Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusionMaterials characterizationDOI: 10.1016/j.matchar.2023.112689
WW
Strength determination for rough substrate-coating interfaces with three-dimensional defect structureInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2023.106149
WW
Functionally Graded Ceramics by Lithography-Based Ceramic Manufacturing (LCM) Journal of additive manufacturing technologiesDOI: 10.18416/JAMTECH.2212678
WW
In-situ X-ray diffraction study of the oxidation behavior of arc-evaporated TiAlSiN coatings with low Al contentsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2023.130161
WW
Lower hardness than strength: The auxetic composite microstructure of limpet toothActa biomaterialiaDOI: 10.1016/j.actbio.2023.04.035
WW
Influence of the aspect ratio of the micro-cantilever on the determined Young\textquoterights modulus using the Euler-Bernoulli equationMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2023.106225
WW
The suitability of common reed (Phragmites australis) for load-bearing structural materialsJournal of materials scienceDOI: 10.1007/s10853-023-08996-1
WW
Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteriesNature CommunicationsDOI: 10.1038/s41467-023-37476-y
WW
Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanismMaterials and DesignDOI: 10.1016/j.matdes.2023.112370
WW
γ0.625pt′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffractionScripta materialiaDOI: 10.1016/j.scriptamat.2023.115665
WW
Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy AlloyNanomaterialsDOI: 10.3390/nano13050924
KT
Review of in-process defect monitoring for automated tape layingComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2023.107654
WW
Micro-scale fracture toughness of textured alumina ceramicsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.06.028
WW
Reactively-sputtered super-hydrophilic ultra-thin titania films deposited at 120°CMaterials Research Express : MRXDOI: 10.1088/2053-1591/ad0450
ME
Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test RigMetalsDOI: 10.3390/met13061089
WW
Uniform strain high-pressure torsion (US-HPT): an approach to reduce strain gradientsJournal of materials scienceDOI: 10.1007/s10853-023-09147-2
PH
Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering MaterialsDOI: 10.3390/ma16031213
WW
Impact of d‑states on transition metal impurity diffusion in TiNScientific reports (London : Nature Publishing Group)DOI: 10.1038/s41598-023-34768-7
WW
Structure and migration mechanisms of small vacancy clusters in Cu: A combined EAM and DFT studyNanomaterialsDOI: 10.3390/nano13091464
WW
High-temperature fracture behaviour of layered alumina ceramics with textured microstructureJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.11.046
ME
Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticityInternational journal of plasticityDOI: 10.1016/j.ijplas.2023.103652
WW
In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tensionMaterials and DesignDOI: 10.1016/j.matdes.2023.112081
WW
Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grainsMaterials Research LettersDOI: 10.1080/21663831.2023.2281589
KT
Inferring material properties from FRP processes via sim-to-real learningInternational Journal of Advanced Manufacturing TechnologyDOI: 10.1007/s00170-023-11509-8
WW
Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methodsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.129126
KT
Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairsComposite structuresDOI: 10.1016/j.compstruct.2023.117338
KT
Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effectEngineering StructuresDOI: 10.1016/j.engstruct.2023.115952
WW
Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlementMaterials & designDOI: 10.1016/j.matdes.2023.112323
KT
Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modulesInternational Journal of Adhesion and AdhesivesDOI: 10.1016/j.ijadhadh.2023.103454
WW
Efficient preparation of microtip arrays for atom probe tomography using fs-laser processingUltramicroscopyDOI: 10.1016/j.ultramic.2022.113672
WW
Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system Low temperature physicsDOI: 10.1063/10.0021377
WW
Prediction of ring crack initiation in ceramics and glasses using a stress–energy fracture criterionJournal of the American Ceramic SocietyDOI: 10.1111/jace.19076
ME
Numerical treatment of reactive diffusion using the discontinuous Galerkin methodContinuum Mechanics and ThermodynamicsDOI: 10.1007/s00161-023-01258-0
WW
Templated grain growth in rapid sintered 3D-printed alumina ceramicsOpen ceramicsDOI: 10.1016/j.oceram.2023.100428
WW
Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasmaSurface & coatings technologyDOI: 10.1016/j.surfcoat.2023.129344
KT
Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics Applied composite materialsDOI: 10.1007/s10443-023-10198-6
PHWW
Deflecting Dendrites by Introducing Compressive Stress in Li7La3Zr2O12 Using Ion ImplantationSmallDOI: 10.1002/smll.202307515
WW
Precious metal amorphous AgAuSi: Alloy design by swapping gold for silverMaterials and DesignDOI: 10.1016/j.matdes.2023.112099
KT
Bioinspired fracture toughness enhancement of a fully bio-based epoxy resinPolymer TestingDOI: 10.1016/j.polymertesting.2023.108098
PH
Optimizing surfactant removal from a soft-templated ordered mesoporous carbon precursor: an in situ SAXS studyJournal of applied crystallographyDOI: 10.1107/S1600576723003886
WW
W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from in situ SEM/TEM growth to large scale synthesis and fundamental structural understandingCrystal growth & designDOI: 10.1021/acs.cgd.3c01094
KT
Determination of the glass transition temperature of an epoxy prepreg by Near Infrared SpectroscopyPolymer TestingDOI: 10.1016/j.polymertesting.2023.108111
WW
The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacementsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2023.06.016
KT
Highly conductive RuO2 thin films from novel facile aqueous chemical solution depositionJournal of sol-gel science and technologyDOI: 10.1007/s10971-023-06221-8
ME
A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal PrinciplesScripta MaterialiaDOI: 10.1016/j.scriptamat.2023.115519
WW
Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron Advanced engineering materialsDOI: 10.1002/adem.202201011
WW
Phase stability of TiAl-based BCC high entropy alloysIntermetallicsDOI: 10.1016/j.intermet.2023.107893
WW
Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloyMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2023.144868
KT
Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate compositesRSC AdvancesDOI: 10.1039/d3ra02504g
WW
Adhesion of WTi to polyimide measured by complementary methodsSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2023.130148
WW
High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing Advanced engineering materialsDOI: 10.1002/adem.202200288
KT
Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipesEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2023.109423
WW
Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloyJournal of magnesium and alloysDOI: 10.1016/j.jma.2023.05.012
WW
Low-temperature fabrication of ceramics by the cold sintering processCeramic forum international (CFI)KT
Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding Journal of composites scienceDOI: 10.3390/jcs7030122
KT
A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterialsAdvances in Engineering SoftwareDOI: 10.1016/j.advengsoft.2023.103553
WW
Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulationsComposites Part B: EngineeringDOI: 10.1016/j.compositesb.2023.110715
KT
Surface-Initiated Polymerizations Mediated by Novel Germanium-Based PhotoinitiatorsACS Applied Materials and InterfacesDOI: 10.1021/acsami.3c05528
WW
In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentialsMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2023.145738
ME
Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and ModellingMetallurgical and materials transactions. B, Process metallurgy and materials processing scienceDOI: 10.1007/s11663-023-02783-8
WW
Multiple transition temperature enhancement in superconducting TiNbMoTaW high entropy alloy films through tailored N incorporationActa materialiaDOI: 10.1016/j.actamat.2023.119428
KT
Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected resultsScience and Engineering of Composite MaterialsDOI: 10.1515/secm-2022-0175
PH
Electrical monitoring of organic crystal phase transition using MoS2 field effect transistorNanoscale advancesDOI: 10.1039/d2na00817c
KT
Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer compositesRSC AdvancesDOI: 10.1039/d3ra05976f
KT
Vitrimeric shape memory polymer-based fingertips for adaptive graspingFrontiers in robotics and AIDOI: 10.3389/frobt.2023.1206579
WW
Modification of the Cu/W interface cohesion by segregationMetals : open access journal DOI: 10.3390/met13020346
KT
Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structureJournal of applied polymer scienceDOI: 10.1002/app.54111
WW
Enhancing mechanical properties of ultrafine-grained tungsten for fusion applicationsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2023.106125
KTWW
Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface OxidationNanomaterialsDOI: 10.3390/nano13142085
WW
Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperaturesIntermetallicsDOI: 10.1016/j.intermet.2022.107797
WW
Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopyMRS BulletinDOI: 10.1557/s43577-023-00549-w
WW
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminideIntermetallicsDOI: 10.1016/j.intermet.2023.107852
KT
In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour MaterialsDOI: 10.3390/ma16196489
WW
Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical testsNanotechnologyDOI: 10.1088/1361-6528/ac952d
WW
Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element AnalysisMaterialsDOI: 10.3390/ma16072646
WW
In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glassIntermetallicsDOI: 10.1016/j.intermet.2022.107807
WW
Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeamsJOURNAL OF MATERIALS SCIENCE & TECHNOLOGYDOI: 10.1016/j.jmst.2022.12.006
ME
Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical modelResults in EngineeringDOI: 10.1016/j.rineng.2023.101694
ME
Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales MaterialsDOI: 10.3390/ma16072568
WW
Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural MaterialsACS Sustainable Chemistry and EngineeringDOI: 10.1021/acssuschemeng.3c01375
WW
Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formatsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2022.106032
KT
Additive Printing of Thermally Cured Two-Component Epoxy: A Route to Mesoscale Structuring for Improved DuctilityACS applied polymer materialsDOI: 10.1021/acsapm.3c00472
WW
Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbanceNature CommunicationsDOI: 10.1038/s41467-023-44060-x
WW
Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.168005
WW
A correlative experimental and theoretical investigation of phase formation and thermal stability of a quaternary Cr0.69Ta0.20B0.11N coatingMaterialiaDOI: 10.1016/j.mtla.2023.101931
WW
On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of ProductionMaterialsDOI: 10.3390/ma16175780
WW
Reply to Quinn GD, Salem JA, Swab JJ. Comment On: Lubauer J, Lohbauer U, Henrich M, Munz M, Lube T, Belli R. Intricacies involving the evaluation of fracture toughness obtained by the surface-crack-in-flexure method. J Am Ceram Soc. 2022;105(12):7582-7599Journal of the American Ceramic SocietyDOI: 10.1111/jace.19242
WW
Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loadingJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0002348
WW
Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloysMaterialiaDOI: 10.1016/j.mtla.2023.101846
WW
Efficient descriptors and active learning for grain boundary segregationPhysical review materials DOI: 10.1103/PhysRevMaterials.7.113606
WW
A brief guide to conducting failure analysis on ceramic componentsPractical metallography = Praktische MetallographieDOI: 10.1515/pm-2023-0049
WW
Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy CastingsAdvanced scienceDOI: 10.1002/advs.202204315
WW
Highly textured 3D-printed translucent alumina through pressure-assisted sinteringOpen ceramicsDOI: 10.1016/j.oceram.2023.100487
KT
Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and PolypropylenePolymersDOI: 10.3390/polym15204126
KT
Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging ApplicationsAdvanced materialsDOI: 10.1002/adma.202300830
WW
Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloyJournal of non-crystalline solidsDOI: 10.1016/j.jnoncrysol.2023.122167
WW
Segregation to α2/γ interfaces in TiAl alloys: A multiscale QM/MM studyPhysical review materials DOI: 10.1103/PhysRevMaterials.7.063604
KT
Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jettingPolymer TestingDOI: 10.1016/j.polymertesting.2023.107977
ME
A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragmentsMinerals engineeringDOI: 10.1016/j.mineng.2023.108328
WW
Assessment of different processing strategies to fabricate bulk Mg-Fe nanocompositesJournal of Alloys and Metallurgical SystemsDOI: 10.1016/j.jalmes.2023.100034
WW
Metal–Matrix Composites from High-Pressure Torsion with Functionalized Material BehaviorAdvanced Engineering MaterialsDOI: 10.1002/adem.202201565
ME
Synthetic load profiles of non-energy intensive industrial sites: A combined bottom-up and top-down approachSustainable Energy, Grids and NetworksDOI: 10.1016/j.segan.2023.101078
WW
Crystal-Orientation-Dependent Oxygen Exchange Kinetics on Mixed Conducting Thin-Film Surfaces Investigated by In Situ StudiesACS Applied Energy MaterialsDOI: 10.1021/acsaem.3c00870
WW
Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditionsCurrent opinion in solid state & materials scienceDOI: 10.1016/j.cossms.2023.101108
KT
Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimersPolymer ChemistryDOI: 10.1039/d3py00377a
WW
Moderne, hochfeste Metallpulver- und schweißpulvergefüllte Fülldrähte mit einer Streckgrenze über 690 Mpa: Ein ÜberblickSchweiß- & PrüftechnikKT
Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methodsPolymer TestingDOI: 10.1016/j.polymertesting.2023.108130
WW
Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kineticsJournal of non-crystalline solidsDOI: 10.1016/j.jnoncrysol.2023.122390
WW
Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructureInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2023.107592
KT
Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using SimulationMicromachinesDOI: 10.3390/mi14040876
WW
Deformation and failure behavior of nanocrystalline WCuMaterials Science and Engineering ADOI: 10.1016/j.msea.2023.145760
KT
Amino Acid-Based Polyphosphorodiamidates with Hydrolytically Labile Bonds for Degradation-Tuned PhotopolymersACS Macro LettersDOI: 10.1021/acsmacrolett.3c00173
KT
Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and PolycarbonatePolymersDOI: 10.3390/polym15061568
KT
Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen CarrierPolymersDOI: 10.3390/polym15224410
WW
Data-mining of in-situ TEM experiments: Towards understanding nanoscale fractureComputational materials scienceDOI: 10.1016/j.commatsci.2022.111830
WW
Models of configurationally-complex alloys made simpleComputer physics communicationsDOI: 10.1016/j.cpc.2023.108664
KT
Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)PolymersDOI: 10.3390/polym15143007
WW
Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramicsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.08.058
PHWW
Hierarchical Surface Pattern on Ni‐Free Ti‐Based Bulk Metallic Glass to Control Cell InteractionsSmallDOI: 10.1002/smll.202310364
KT
Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber glovesJournal of applied polymer scienceDOI: 10.1002/app.53973
WW
In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel Advanced engineering materialsDOI: 10.1002/adem.202300410
KT
Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print qualityJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2022.11.143
WW
Operando Spatial and Temporal Tracking of Axial Stresses and Interfaces in Solid-state BatteriesSmallDOI: 10.1002/smll.202307837
WW
Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2023.172400
WW
Press-compaction-assisted binder jetting of textured ceramicsCeramics InternationalDOI: 10.1016/j.ceramint.2023.09.265
WW
SPD Deformation of Pearlitic, Bainitic and Martensitic SteelsMaterials transactionsDOI: 10.2320/matertrans.MT-MF2022027
WW
Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steelVacuumDOI: 10.1016/j.vacuum.2023.112830
PH
Multimode Lasing in All-Solution-Processed UV-Nanoimprinted Distributed Feedback MAPbI3 Perovskite WaveguidesACS photonicsDOI: 10.1021/acsphotonics.3c00206
WW
Is it meaningful to quantify vacancy concentrations of nanolamellar (Ti,Al)N thin films based on laser-assisted atom probe data?Surface & coatings technologyDOI: 10.1016/j.surfcoat.2023.130020
KT
Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopyPolymer Degradation and StabilityDOI: 10.1016/j.polymdegradstab.2023.110345
WW
Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusionJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2023.168803
WW
Old core, new tricks: a comparative study of old and new mudstone cores for applications in the energy transitionGeoenergyDOI: 10.1144/geoenergy2023-013
WW
The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluationJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.09.047
KT
The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimersPolymer ChemistryDOI: 10.1039/d3py00333g
WW
Oxidation mechanism of sputter deposited model SiNx/TiN/SiNx coatingsSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2023.129753
WW
Magnetic Properties of a High-Pressure Torsion Deformed Co-Zr AlloyNanomaterialsDOI: 10.3390/nano13162280
KT
Soft dielectric actuator produced by multi-material fused filament fabrication 3D printingPolymers for Advanced TechnologiesDOI: 10.1002/pat.6024
WW
Improved thermolytic dehydrogenation of LiBH4 nanoconfined in few-layer graphene with different functionalitiesMaterials Today SustainabilityDOI: 10.1016/j.mtsust.2023.100486
KT
Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space ApplicationsLubricantsDOI: 10.3390/lubricants11020081
WW
The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy AlloyAdvanced Engineering MaterialsDOI: 10.1002/adem.202300863
KT
Fabrication of Amorphous Silicon-Carbon Hybrid Films using Single Source PrecursorsInorganic chemistryDOI: 10.1021/acs.inorgchem.3c01846
WW
Decomposition of CrN induced by laser-assisted atom probe tomographyUltramicroscopyDOI: 10.1016/j.ultramic.2022.113673
WW
Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion Journal of manufacturing processesDOI: 10.1016/j.jmapro.2023.01.061
WW
Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strengthScripta materialiaDOI: 10.1016/j.scriptamat.2023.115428
WW
A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloyScripta materialiaDOI: 10.1016/j.scriptamat.2022.115247
WW
Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterionJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.12.022
KT
Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-PrintingAdvanced Materials TechnologiesDOI: 10.1002/admt.202300237
WW
Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation studyMaterials and DesignDOI: 10.1016/j.matdes.2023.112198
WW
High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processesActa materialiaDOI: 10.1016/j.actamat.2023.119380
KTWW
Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant materialMaterials and DesignDOI: 10.1016/j.matdes.2023.112256
WW
Microalloying as a strategy to modulate antibacterial ion release from metallic glassesJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2023.172121
WW
Inverse parameter determination for metal foils in multifunctional compositesMaterials and DesignDOI: 10.1016/j.matdes.2023.111711
WW
Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfacesMaterials and DesignDOI: 10.1016/j.matdes.2023.112327
WW
Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures Advanced engineering materialsDOI: 10.1002/adem.202201209
KT
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios WSEAS transactions on environment and developmentDOI: 10.37394/232015.2023.19.117
WW
Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin filmsCommunications materialsDOI: 10.1038/s43246-023-00339-6
WW
Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending testsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2023.106173
KT
In-line and off-line NDT defect monitoring for thermoplastic automated tape layupNDT and E internationalDOI: 10.1016/j.ndteint.2023.102839
WW
Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopyScripta materialiaDOI: 10.1016/j.scriptamat.2023.115333
WW
Uniform Droplet Spraying of Magnesium Alloys: Modeling of Apollonian Fractal Structures on Micrograph Sections Journal of Manufacturing and Materials ProcessingDOI: 10.3390/jmmp7040122
Publications 2022
KT
Analysis of Permeation of Low-Molecular-Weight Hydrocarbons through Polyolefins for Testing of a New Developed MethodMacromolecular chemistry and physicsDOI: 10.1002/macp.202200208
WW
Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalumMaterials and DesignDOI: 10.1016/j.matdes.2022.110545
WW
Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation—Part 1: DeformationActa materialiaDOI: 10.1016/j.actamat.2022.118008
ET
Optimization-based investigation of different repurposing concepts for Austrian coal-fired power plantsElektrotechnik und InformationstechnikDOI: 10.1007/s00502-022-01090-5
KT
Multimaterial Extrusion-Based Additive Manufacturing of Compliant Crack Arrester: Influence of Interlayer Length, Thickness, and Applied Strain Rate Advanced engineering materialsDOI: 10.1002/adem.202101703
WW
Mechanical behavior and deformation mechanism of shape memory bulk metallic glass composites synthesized by powder metallurgyJournal of Materials Science and TechnologyDOI: 10.1016/j.jmst.2021.10.002
WW
Maximizing the degree of rejuvenation in metallic glassesScripta MaterialiaDOI: 10.1016/j.scriptamat.2022.114575
KT
Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratioAPL MaterialsDOI: 10.1063/5.0091756
WW
Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical propertiesScientific reportsDOI: 10.1038/s41598-022-14475-5
KT
Process Optimization of Injection Overmolding Structural Electronics with Regard to Film DistortionPolymersDOI: 10.3390/polym14235060
KT
Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF ModelsMetalsDOI: 10.3390/met12122169
KT
3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks Advanced engineering materialsDOI: 10.1002/adem.202200901
KT
Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling Journal of composites scienceDOI: 10.3390/jcs6020034
WW
Experimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °CCrystalsDOI: 10.3390/cryst12091184
WW
Thermal stress analysis and structural optimization of ladle nozzle based on finite element simulationMaterials Research ExpressDOI: 10.1088/2053-1591/ac648c
WW
Achieving 1 GPa fatigue strength in nanocrystalline 316L steel through recovery annealingScripta MaterialiaDOI: 10.1016/j.scriptamat.2022.114773
WW
Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopyMaterials and DesignDOI: 10.1016/j.matdes.2022.111136
WW
Thermal stability of a cathodic arc evaporated Cr 0.74 Ta 0.26 N coatingMaterialiaDOI: 10.1016/j.mtla.2022.101434
WW
Evolution of the fracture properties of arc evaporated Ti1-xAlxN coatings with increasing Al contentSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128690
WW
Anomalous thermal conductivity in amorphous niobium pentoxide thin films: A correlation study between structure and thermal propertiesMaterialiaDOI: 10.1016/j.mtla.2022.101601
WW
The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure ApproachJOMDOI: 10.1007/s11837-022-05290-4
WW
Nanobeam electron diffraction strain mapping in monocrystalline silicon of modern trench power MOSFETsMicroelectronic engineeringDOI: 10.1016/j.mee.2022.111870
KT
Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristicsAdditive ManufacturingDOI: 10.1016/j.addma.2022.102987
KT
Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardantsPolymer Degradation and StabilityDOI: 10.1016/j.polymdegradstab.2021.109783
ME
Numerical Treatment of Oxide Particle Dissolution in Multicomponent Slags with Local Gibbs Energy MinimizationSteel research internationalDOI: 10.1002/srin.202200056
WW
Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels Advanced engineering materialsDOI: 10.1002/adem.202200532
KT
Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper FeedstocksPolymers / Molecular Diversity Preservation InternationalDOI: 10.3390/polym14224962
WW
Ab initio -guided X-ray photoelectron spectroscopy quantification of Ti vacancies in Ti1−δOxN1−x thin filmsActa materialiaDOI: 10.1016/j.actamat.2022.117778
KT
Sustainable Tunnelling – An infrastructure operator\textquoterights, planner\textquoterights, contractor\textquoterights and scientist\textquoterights perspective.Geomechanics and tunnellingDOI: 10.1002/geot.202200058
WW
Shear-band blunting governs superior mechanical properties of shape memory metallic glass compositesActa MaterialiaDOI: 10.1016/j.actamat.2022.118422
WW
Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic compositesJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.06.021
WW
Graphene on silicon: Effects of the silicon surface orientation on the work function and carrier density of graphenePhysical review : B, Condensed matter and materials physicsDOI: 10.1103/PhysRevB.105.165416
WW
Microstructural adjustment of hot-rolled Ti–6Al–4V based on a CCT diagramMaterials science and technologyDOI: 10.1080/02670836.2022.2068243
WW
Deformation-induced medium-range order changes in bulk metallic glassesPhysical review materials DOI: 10.1103/PhysRevMaterials.6.043603
WW
Structure-dynamics relationships in cryogenically deformed bulk metallic glassNature CommunicationsDOI: 10.1038/s41467-021-27661-2
KT
In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensorsPolymer CompositesDOI: 10.1002/pc.26480
WW
In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4VMaterials characterizationDOI: 10.1016/j.matchar.2022.112207
WW
X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistorsMaterialiaDOI: 10.1016/j.mtla.2022.101484
WW
Effect of supporting electrolyte on capacitance and morphology of electrodeposited poly(3,4-propylenedioxythiophene) derivatives bearing reactive functional groupsMolecular Systems Design and EngineeringDOI: 10.1039/d1me00171j
WW
Relaxation and Strain-Hardening Relationships in Highly Rejuvenated Metallic Glasses MaterialsDOI: 10.3390/ma15051702
WW
Iron oxide - poly(m-anthranilic acid)-poly(ϵ-caprolactone) electrospun composite nanofibers: fabrication and propertiesMolecular Systems Design and EngineeringDOI: 10.1039/d2me00181k
KTME
Towards virtually optimized curing cycles for polymeric encapsulations in microelectronicsMicroelectronics ReliabilityDOI: 10.1016/j.microrel.2022.114799
WW
The importance of lamellar architecture to obtain ductility in heavily cold-worked pearlitic steels revealed by microbending experimentsActa MaterialiaDOI: 10.1016/j.actamat.2022.117935
WW
Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steelMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2022.144024
WW
Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminatesJournal of the American Ceramic SocietyDOI: 10.1111/jace.18043
KT
Blocked Phosphates as Photolatent Catalysts for Dynamic Photopolymer NetworksAngewandte Chemie - International EditionDOI: 10.1002/anie.202215525
KTPH
Nanoindentation for Fast Investigation of PET Film DegradationJOMDOI: 10.1007/s11837-022-05278-0
PHWW
Evaluation of the CO2 Storage Capacity in Sandstone Formations from the Southeast Mesohellenic trough (Greece)Energies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15103491
KT
Mechanisms of rapid fracture in PA12 gradesTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2021.103145
WW
Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128098
KT
Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug deliveryEuropean Journal of Pharmaceutics and BiopharmaceuticsDOI: 10.1016/j.ejpb.2022.04.001
WW
Synthesis, thermodynamic analysis and magnetic study of novel ball- milled Co50Fe25Ta5Si5C15 glassy powders with high thermal stabilityJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2021.162509
KT
Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection MoldingPolymersDOI: 10.3390/polym14173653
WW
Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steelMaterials characterizationDOI: 10.1016/j.matchar.2022.112318
WW
Applications of Data Driven Methods in Computational Materials DesignBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01182-3
KT
A porous capillary tube approach for textile saturationComposites science and technologyDOI: 10.1016/j.compscitech.2022.109450
KT
Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber Journal of composites scienceDOI: 10.3390/jcs6060152
WW
High-strength lithography-based additive manufacturing of ceramic components with rapid sinteringAdditive ManufacturingDOI: 10.1016/j.addma.2022.103141
WW
How Si affects the microstructural evolution and phase transformations of intermetallic 훾-TiAl based alloysMaterialiaDOI: 10.1016/j.mtla.2022.101475
WW
Energies and structures of Cu/Nb and Cu/W interfaces from density functional theory and semi-empirical calculationsMaterialiaDOI: 10.1016/j.mtla.2022.101362
KT
A new method for successful indirect bonding in relation to bond strengthBiomedical engineering = Biomedizinische TechnikDOI: 10.1515/bmt-2022-0147
WW
Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applicationsScripta materialiaDOI: 10.1016/j.scriptamat.2022.114641
KT
Ingested microplastics: Do humans eat one credit card per week?Journal of hazardous materials lettersDOI: 10.1016/j.hazl.2022.100071
WW
Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloyMaterials and DesignDOI: 10.1016/j.matdes.2022.110530
KT
Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer compositesMaterials and DesignDOI: 10.1016/j.matdes.2022.110828
WW
Thermally Stable Nanotwins: New Heights for Cu MechanicsAdvanced scienceDOI: 10.1002/advs.202203544
ME
Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronicsMicroelectronics ReliabilityDOI: 10.1016/j.microrel.2022.114537
WW
Accurate ab initio modeling of solid solution strengthening in high entropy alloysPhysical review materials DOI: 10.1103/PhysRevMaterials.6.103602
WW
Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separationJournal of applied polymer scienceDOI: 10.1002/app.51423
WW
Tribological investigations of Mo films deposited on thin polyimide substratesSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128549
WW
Influence of interlayers on the interfacial behavior of Ag films on polymer substratesThin solid filmsDOI: 10.1016/j.tsf.2021.139051
WW
Influence of the 1% Ti content on microstructure, friction coefficient and contribution to the strengthening mechanisms in the Al20Sn1Cu alloyResults in EngineeringDOI: 10.1016/j.rineng.2022.100506
PHWW
Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallizationMaterials today advancesDOI: 10.1016/j.mtadv.2022.100316
WW
FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin FilmsCeramicsDOI: 10.3390/ceramics5030023
PH
Single-crystalline nanoribbon network field effect transistors from arbitrary two-dimensional materialsnpj 2D materials and applicationsDOI: 10.1038/s41699-022-00356-y
KTWW
Hardness Loss of Plastic Mold Steels: Phenomenon in Injection MoldingSteel research internationalDOI: 10.1002/srin.202200326
KT
Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials MaterialsDOI: 10.3390/ma15093273
WW
On the transition of failure control from material-intrinsic defects to defects forming during monotonically increasing and cyclic mechanical loading in WC-Co hard metal at elevated temperatureActa materialiaDOI: 10.1016/j.actamat.2022.118087
WW
High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing Advanced engineering materialsDOI: 10.1002/adem.202200764
WW
On the influence of the Cr/(Cr + Ta) ratio on the microstructure, mechanical properties and thermal stability of magnetron sputtered CrxTa1-xN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128877
WW
Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metalMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2022.143550
WW
Carbon nanotube-polybutadiene-poly(ethylene oxide)-based composite fibers: Role of cryogenic treatment on intrinsic propertiesPolymers for Advanced TechnologiesDOI: 10.1002/pat.5828
WW
W 4f electron binding energies in amorphous W-B-C systemsApplied surface scienceDOI: 10.1016/j.apsusc.2022.152824
WW
Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-NActa materialiaDOI: 10.1016/j.actamat.2022.117897
WW
Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum DotsJournal of physical chemistry lettersDOI: 10.1021/acs.jpclett.2c02964
WW
An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®Materials and DesignDOI: 10.1016/j.matdes.2022.111410
WW
Nanoscale Metafoils with Enhanced Mechano-Optical Properties for Solar Radiation IsolationACS Applied Nano MaterialsDOI: 10.1021/acsanm.2c03075
WW
Interface-related deformation phenomena in metallic glass/high entropy nanolaminatesActa MaterialiaDOI: 10.1016/j.actamat.2022.118191
WW
Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glassesJournal of non-crystalline solidsDOI: 10.1016/j.jnoncrysol.2021.121266
WW
Effect of a single overload on the cyclic R-curve behaviour of a γ-TiAl TNM alloyInternational Journal of FatigueDOI: 10.1016/j.ijfatigue.2022.107083
WW
Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum ArcCrystalsDOI: 10.3390/cryst12101486
WW
Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramicsInternational journal of applied ceramic technologyDOI: 10.1111/ijac.13806
WW
Composition design, synthesis and hydrogen storage ability of multi-principal-component alloy TiVZrNbTaJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.163638
KT
How to accelerate natural weathering of polymeric photovoltaic backsheets – A comparison with standardized artificial agingSolar energy materials and solar cellsDOI: 10.1016/j.solmat.2022.111819
ME
A Technology-Enhanced \textquoteleftAssessment System for Teaching and Assessment using a Computer Algebra Kernel\textquoteright (STACK): The Best Contributions of 2022\textquoterights STACK Community Meeting at the Montanuniversitaet Leoben, Austria International journal emerging technologies in learning : iJETDOI: 10.3991/ijet.v17i23.35913
WW
Impact of Si on the high-temperature oxidation of AlCr(Si)N coatingsJOURNAL OF MATERIALS SCIENCE & TECHNOLOGYDOI: 10.1016/j.jmst.2021.04.065
KT
Wanted: Höchste Qualität bei der SpritzgießsimulationKC-aktuell (Informationen aus dem Kunstoff-Cluster)ME
On shape forming by contractile filaments in the surface of growing tissuesPNAS NexusDOI: 10.1093/pnasnexus/pgad016
PHWW
Probing the charge transfer and electron–hole asymmetry in graphene–graphene quantum dot heterostructureNanotechnologyDOI: 10.1088/1361-6528/ac6c38
WW
Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistryActa materialiaDOI: 10.1016/j.actamat.2022.117939
WW
100 years after Griffith: From brittle bulk fracture to failure in 2D materialsMRS BulletinDOI: 10.1557/s43577-022-00379-2
WW
Experimental and theoretical studies on two-dimensional vanadium carbide hybrid nanomaterials derived from V4AlC3 as excellent catalyst for MgH2Journal of magnesium and alloysDOI: 10.1016/j.jma.2022.09.019
WW
In-situ observation of the phase evolution during an electromagnetic-assisted sintering experiment of an intermetallic γ -TiAl based alloyScripta materialiaDOI: 10.1016/j.scriptamat.2021.114233
KT
Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent basesPolymer ChemistryDOI: 10.1039/d1py01722e
WW
Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrationsActa materialiaDOI: 10.1016/j.actamat.2021.117570
WW
Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thicknessSurface & coatings technologyDOI: 10.1016/j.surfcoat.2021.128070
WW
Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH2)2 for hydrogen storageJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.164397
WW
Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRDMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2022.104267
KT
A Study on Over-Molded Copper-Based Flexible Electronic CircuitsMicromachinesDOI: 10.3390/mi13101751
WW
Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firingJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2022.05.010
WW
Crack length estimations for small-scale fracture experiments via image processing techniquesJournal of Materials ResearchDOI: 10.1557/s43578-022-00681-4
KT
A review of parameters affecting success of lower-limb prosthetic socket and liners and implementation of 3D printing technologiesMaterials Today: ProceedingsDOI: 10.1016/j.matpr.2022.09.280
WW
Theory of asymmetric and piezotronically modified double Schottky barriersJournal of applied physicsDOI: 10.1063/5.0095686
WW
High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steelMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2022.103299
WW
Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges RecyclingÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-022-00903-3
KT
Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible AdhesivesMacromolecular materials and engineeringDOI: 10.1002/mame.202200237
WW
Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718MetalsDOI: 10.3390/met12050710
WW
Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD studyActa materialiaDOI: 10.1016/j.actamat.2022.117727
WW
Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatingsMaterialiaDOI: 10.1016/j.mtla.2022.101323
WW
Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steelMetals : open access journal DOI: 10.3390/met12040538
WW
Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundariesActa materialiaDOI: 10.1016/j.actamat.2021.117470
KT
Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process Polymer crystallizationDOI: 10.1155/2022/2387752
WW
Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatingsScripta materialiaDOI: 10.1016/j.scriptamat.2021.114492
WW
A simple and effective way to evaluate the accuracy of digital image correlation combined with scanning electron microscopy (SEM-DIC)Results in MaterialsDOI: 10.1016/j.rinma.2022.100276
WW
The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steelsMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2022.144313
WW
Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi MaterialsDOI: 10.3390/ma15238407
WW
Duplex heat treatment of a precipitation hardening carburising steelHTM - journal of heat treatment and materials DOI: 10.1515/htm-2022-1006
PH
Exciton tuning in monolayer WSe2 via substrate induced electron dopingNanoscale advancesDOI: 10.1039/d2na00495j
WW
Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steelJournal of materials scienceDOI: 10.1007/s10853-022-07866-6
WW
Microstructural, chemical, and crystallographic investigations of dynamic strain‐induced ferrite in a microalloyed QT steelMaterialsDOI: 10.3390/met12020313
WW
Solubility and segregation of B in paramagnetic fcc FePhysical review materials DOI: 10.1103/PhysRevMaterials.6.023604
WW
Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticlesMaterials Science and Engineering ADOI: 10.1016/j.msea.2022.143833
WW
Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayersMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2022.103455
WW
Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells Journal of energy storageDOI: 10.1016/j.est.2022.104563
KT
Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymersSoftwareXDOI: 10.1016/j.softx.2022.101198
WW
Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscaleJournal of physical chemistry C (C, Nanomaterials and interfaces)DOI: 10.1021/acs.jpcc.2c00674
WW
Influence of the Ti Content on the Grain Stability and the Recrystallization Behavior of Nb-Alloyed High-Strength Low-Alloyed SteelsSteel research internationalDOI: 10.1002/srin.202200094
KT
Freeformer im OP: Projekt CAMed: Implementierung additiver Fertigung im klinischen Bereich. today. Das ARBURG MagazinWW
Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different TemperaturesMetalsDOI: 10.3390/met12111824
KT
Single-Step Kinetic Predictions Based on a Constructed Isoconversional State DiagramMacromolecular Theory and SimulationsDOI: 10.1002/mats.202300066
KT
Efficient prediction of crack initiation from arbitrary 2D notchesTheoretical and Applied Fracture MechanicsDOI: 10.1016/j.tafmec.2022.103376
WW
Potential Causes for Cracking of a Laser Powder Bed Fused Carbon-free FeCoMo AlloyBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01238-y
WW
Nanoindentation creep behavior of an Fe–Cr–Mo–B–C amorphous coating via atmospheric plasma sprayingIntermetallicsDOI: 10.1016/j.intermet.2021.107411
WW
Prediction of grain boundary chemistry in multicomponent Mo alloys with coupled precipitation and segregation kinetics simulationsActa materialiaDOI: 10.1016/j.actamat.2021.117482
WW
Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel Advanced engineering materialsDOI: 10.1002/adem.202200524
KT
Fatigue Analysis and Defect Size Evaluation of Filled NBR including Temperature InfluenceMaterialsDOI: 10.3390/ma15113745
WW
Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin FilmsActa materialiaDOI: 10.1016/j.actamat.2022.118156
ME
Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysisPhysics and Chemistry of MineralsDOI: 10.1007/s00269-022-01183-9
PHWW
Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storageChemical Engineering JournalDOI: 10.1016/j.cej.2021.131730
KT
Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6IFatigue and Fracture of Engineering Materials and StructuresDOI: 10.1111/ffe.13634
WW
Development of Ceramic Electrodes for Spark Plugs: Materials SelectionCeramic forum international (CFI)WW
On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder Advanced engineering materialsDOI: 10.1002/adem.202201242
WW
Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloyIntermetallicsDOI: 10.1016/j.intermet.2022.107653
PH
Bowtie-shaped deformation isotherm of superhydrophobic cylindrical mesoporesLangmuirDOI: 10.1021/acs.langmuir.1c02427
KT
Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces Advanced engineering materialsDOI: 10.1002/adem.202200567
WW
Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic DeformationNanomaterialsDOI: 10.3390/nano12060963
KT
Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated ElectronsPolymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials)DOI: 10.3390/polym14224970
KT
Ein zweites Leben für Haushaltsverpackungen: Ein Kooperationsprojekt des Kunststoff-Clusters aus der Sicht der BeteiligtenChemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & MaterialwissenschaftenWW
Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blastingRare MetalsDOI: 10.1007/s12598-022-02164-1
MEWW
Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loadingEngineering Failure AnalysisDOI: 10.1016/j.engfailanal.2022.106567
KT
Novel Additive Manufacturing Materials for Waste Heat Deduction Advanced engineering materialsDOI: 10.1002/adem.202200671
WW
Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture designnpj Materials degradationDOI: 10.1038/s41529-022-00256-y
WW
Enhanced mechanical properties of Zr65Cu15Ni10Al10bulk metallic glass by simultaneously introducing surface grooves and multiple shear bandsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2022.09.117
KT
Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6 MaterialsDOI: 10.3390/ma15196600
WW
Phase equilibria in the Ti-rich part of the Ti-Al-Nb system: Part I: Low-Temperature Phase Equilibria Between 700 and 900 °CJournal of phase equilibria and diffusionDOI: 10.1007/s11669-022-00963-8
WW
Mechanical Properties of Atomic-Layer-Deposited Al2O3/Y2O3 Nanolaminate Films on Aluminum toward Protective CoatingsACS Applied Nano MaterialsDOI: 10.1021/acsanm.2c00378
WW
Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4VAdditive ManufacturingDOI: 10.1016/j.addma.2022.103092
WW
Significant interlayer coupling in bilayer graphene and double-walled carbon nanotubes: A refinement of obtaining strain in low-dimensional materialsPhysical review : B, Condensed matter and materials physicsDOI: 10.1103/PhysRevB.105.024103
PH
Development of foam-like emulsion phases in porous media flowJournal of colloid and interface scienceDOI: 10.1016/j.jcis.2021.10.022
KT
Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene CompositesPolymersDOI: 10.3390/polym14204389
KT
Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolutionComposites Part B: EngineeringDOI: 10.1016/j.compositesb.2022.109853
PHWW
Nanoporous Carbon Electrodes Derived from Coffee Side Streams for Supercapacitors in Aqueous ElectrolytesNanomaterialsDOI: 10.3390/nano12152647
WW
Strain-stabilized Al-containing high-entropy sublattice nitridesActa materialiaDOI: 10.1016/j.actamat.2021.117483
KT
Improved concept for iterative crack propagation using configurational forces for targeted angle correctionEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2022.108403
WW
Probing the stability, adhesion strength, and fracture mechanism of Mg/Al2Y interfaces via first-principles calculationsMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2022.104612
WW
Intricacies involving the evaluation of fracture toughness obtained by the surface‐crack‐in‐flexure methodJournal of the American Ceramic SocietyDOI: 10.1111/jace.18667
WW
The influence of chemistry on the interface toughness in a WTi-Cu systemActa MaterialiaDOI: 10.1016/j.actamat.2022.117813
WW
Understanding and controlling inversion boundaries in ZnOActa materialiaDOI: 10.1016/j.actamat.2022.117804
WW
New-generation biocompatible Ti-based metallic glass ribbons for flexible implantsMaterials and DesignDOI: 10.1016/j.matdes.2022.111139
WW
Determination of the degree of recrystallization of a microalloyed HSLA steel by using metallographic methodsPractical metallography = Praktische MetallographieDOI: 10.1515/pm-2022-1007
WW
Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloysJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2022.11.064
WW
Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditionsCarbohydrate polymer technologies and applicationsDOI: 10.1016/j.carpta.2022.100238
WW
Atomistic mechanisms underlying plasticity and crack growth in ceramics: a case study of AlN/TiN superlatticesActa materialiaDOI: 10.1016/j.actamat.2022.117809
KT
Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building BlocksPolymersDOI: 10.3390/polym14245377
WW
On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturingJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2021.163155
WW
Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elementsMaterialiaDOI: 10.1016/j.mtla.2022.101321
WW
Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma SinteringMetals : open access journal DOI: 10.3390/met12111915
WW
Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.167177
WW
The beneficial effect of rolling on the fracture toughness and R-curve behavior of pure tungstenMaterials Science and Engineering ADOI: 10.1016/j.msea.2022.142756
WW
Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic ScaleMetals : open access journal DOI: 10.3390/met12060906
WW
Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation—Part 2: StrengtheningActa materialiaDOI: 10.1016/j.actamat.2022.118009
KT
On the slow crack growth process and associated structure–property relationships in polyamide 12 gradesJournal of applied polymer scienceDOI: 10.1002/app.52357
KT
Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical FiberMaterialsDOI: 10.3390/ma15186497
WW
Stability and ordering of bcc and hcp TiAl+Mo phases: An ab initio studyComputational materials scienceDOI: 10.1016/j.commatsci.2021.111163
KT
Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies Journal of composites scienceDOI: 10.3390/jcs6010010
WW
Processability and cracking behaviour of novel high-alloyed tool steels processed by laser powder bed fusionJournal of materials processing technologyDOI: 10.1016/j.jmatprotec.2021.117435
KT
How hydrogen bonds influence the slow crack growth resistance of polyamide 12PolymerDOI: 10.1016/j.polymer.2021.124437
WW
Limpet teeth microstructure unites auxeticity with extreme strength and high stiffnessScience AdvancesDOI: 10.1126/sciadv.add4644
WW
Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applicationsMaterials and DesignDOI: 10.1016/j.matdes.2021.110306
PH
NMR-Based Cross-Link Densities in EPDM and EPDM/ULDPE Blend Materials and Correlation with Mechanical PropertiesMacromolecular materials and engineeringDOI: 10.1002/mame.202100968
PH
Crystal habit analysis of LiFePO4 microparticles by AFM and first-principles calculationsCrystEngCommDOI: 10.1039/d2ce00788f
KT
The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting Advanced engineering materialsDOI: 10.1002/adem.202200225
KT
Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical propertiesAdditive ManufacturingDOI: 10.1016/j.addma.2021.102518
WW
Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures Advanced engineering materialsDOI: 10.1002/adem.202200341
WW
Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA IIIReview of scientific instrumentsDOI: 10.1063/5.0077105
KT
The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabricationAdditive ManufacturingDOI: 10.1016/j.addma.2022.103246
WW
Optimization of the post-process heat treatment strategy for a Near-α Titanium base alloy produced by laser powder bed fusionMaterialsDOI: 10.3390/ma15031032
KT
Characterization methods for strain-induced damage in polypropylenePolymer Engineering and ScienceDOI: 10.1002/pen.25979
WW
Fracture of severely plastically deformed titaniumMaterials lettersDOI: 10.1016/j.matlet.2021.131382
PHWW
Coffee Waste-Derived Nanoporous Carbons for Hydrogen StorageACS Applied Energy MaterialsDOI: 10.1021/acsaem.2c01573
WW
The effect of zirconium on the Ti-(42-46 at.%)Al systemActa materialiaDOI: 10.1016/j.actamat.2022.118414
WW
Annealing metallic glasses above Tg in order to accelerate the relaxation process in molecular dynamics simulationsApplied physics lettersDOI: 10.1063/5.0073204
PH
Pinaceae Fir Resins as Natural Dielectrics for Low Voltage Operating, Hysteresis-Free Organic Field Effect TransistorsAdvanced Sustainable SystemsDOI: 10.1002/adsu.202200234
WW
On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloysActa materialiaDOI: 10.1016/j.actamat.2022.118268
WW
Lithography-based additive manufacturing of porosity graded aluminaAdditive Manufacturing LettersDOI: 10.1016/j.addlet.2022.100060
ME
Strain and interface energy of ellipsoidal inclusions subjected to volumetric eigenstrains: shape factorsArchive of applied mechanicsDOI: 10.1007/s00419-021-02066-1
KT
High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcementComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2021.106666
WW
How to increase scrap recyclingSteel times internationalME
Thermodynamic trapping and diffusion model for multiple species in systems with multiple sorts of trapsActa MaterialiaDOI: 10.1016/j.actamat.2022.117940
KT
Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach Advanced engineering materialsDOI: 10.1002/adem.202200279
KT
Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymersMonatshefte fur ChemieDOI: 10.1007/s00706-022-03016-5
WW
Prior β grain evolution and phase transformation of selective laser melted Ti6Al4V alloy during heat treatmentJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.165235
WW
Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive ApplicationsBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01291-7
WW
Transformation of amorphous passive oxide film on Zr65Cu17.5Ni10Al7.5 metallic glass ribbonsJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.167265
WW
Solute drag assessment of grain boundary migration in AuActa materialiaDOI: 10.1016/j.actamat.2021.117473
WW
Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinityMaterials and DesignDOI: 10.1016/j.matdes.2022.110675
WW
The segregation of transition metals to iron grain boundaries and their effects on cohesionActa materialiaDOI: 10.1016/j.actamat.2022.117902
KTPH
Anti-Adhesive Organosilane Coating Comprising Visibility on DemandPolymersDOI: 10.3390/polym14194006
KT
Mechanical flexible epoxy resins with 100% bio-basedcarbon content based on epoxidized vegetable oilsJournal of Applied Polymer ScienceDOI: 10.1002/app.53233
WW
Formation and evolution of precipitates in an additively manufactured near-α titanium base alloyMaterialiaDOI: 10.1016/j.mtla.2022.101366
WW
Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturingScripta MaterialiaDOI: 10.1016/j.scriptamat.2021.114277
KT
Influence of morphology and chemical surface composition on electrical conductivity of SiC microspheresSurface ScienceDOI: 10.1016/j.susc.2021.121942
PH
A universal substrate for the nanoscale investigation of two-dimensional materialsApplied surface scienceDOI: 10.1016/j.apsusc.2022.154585
WW
Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW systemSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128446
WW
Mechanical performance of doped W–Cu nanocompositesMaterials Science and Engineering ADOI: 10.1016/j.msea.2022.144102
KT
Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I:: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological ApproachPolymersDOI: 10.3390/polym14204404
KT
Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules MaterialsDOI: 10.3390/ma15093294
KT
Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic CoagentApplied Sciences : open access journalDOI: 10.3390/app12052432
WW
Phase transformations and phase stability in the Ti–44 at.%Al–(0–7 at.%) Mo systemIntermetallicsDOI: 10.1016/j.intermet.2022.107484
WW
Multilayer crystal-amorphous Pd-based nanosheets on Si/SiO2 with interface-controlled ion transport for efficient hydrogen storageInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2021.12.040
WW
Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformationMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2021.142416
WW
Antibacterial activity, cytocompatibility, and thermomechanical stability of Ti40Zr10Cu36Pd14 bulk metallic glassMaterials today bioDOI: 10.1016/j.mtbio.2022.100378
KT
Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal PolymerizationMacromolecular materials and engineeringDOI: 10.1002/mame.202100976
KT
3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites Advanced engineering materialsDOI: 10.1002/adem.202200749
WW
Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression loadSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128546
WW
Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performanceMetals : open access journal DOI: 10.3390/met12122087
WW
Mapping Shear Bands in Metallic Glasses: From Atomic Structure to Bulk DynamicsPhysical review lettersDOI: 10.1103/PhysRevLett.128.245501
KT
Inline tape width control for thermoplastic automated tape layupComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2022.107267
ME
Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functionsActa MaterialiaDOI: 10.1016/j.actamat.2022.118085
KT
In-situ alignment of 3D printed anisotropic hard magnetsScientific reports (London : Nature Publishing Group)DOI: 10.1038/s41598-022-20669-8
WW
Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculationsActa materialiaDOI: 10.1016/j.actamat.2021.117439
KT
Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength vat photopolymerizationAdditive ManufacturingDOI: 10.1016/j.addma.2022.102977
WW
In situ micromechanical analysis of a nano-crystalline W-Cu compositeMaterials and DesignDOI: 10.1016/j.matdes.2022.110848
PH
Assessing Fire-Damage in Historical Papers and Alleviating Damage with Soft Cellulose NanofibersSmallDOI: 10.1002/smll.202105420
WW
Contact damage tolerance of alumina-based layered ceramics with tailored microstructuresJournal of the American Ceramic SocietyDOI: 10.1111/jace.18389
WW
Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion ResistanceAdvanced Materials InterfacesDOI: 10.1002/admi.202201223
WW
Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniquesMaterials & designDOI: 10.1016/j.matdes.2022.110936
WW
Enhanced Oxygen Evolution Reaction of Zr-Cu-Ni-Al Metallic Glass with an Oxide Layer in Alkaline MediaACS CatalysisDOI: 10.1021/acscatal.2c02672
WW
Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity Advanced engineering materialsDOI: 10.1002/adem.202200520
KT
Tribological Method Development of Abrasive Resistant Polymer Coatings for Industrial ApplicationsTribologie und SchmierungstechnikDOI: 10.24053/TuS-2022-0043
WW
Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputteringApplied surface scienceDOI: 10.1016/j.apsusc.2021.151604
WW
Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffnessMaterials Science and Engineering ADOI: 10.1016/j.msea.2022.143901