Publications

Overview of the most important publications with focus on recycling

Publications 2026
VTiU
Comparative techno-economic assessment of CO2-based SAF pathways: Fischer-Tropsch, methanol-to-jet and ethanol-to-jet across three global regions: EU, USA and Middle EastS. Sendlhofer, W. Duan, R. Allgäuer, M. Maly, R. Paulnsteiner, D. Wimmer, C. MarkowitschFuel
DOI: 10.1016/j.fuel.2026.139021
AVAW
Life Cycle Assessment of plastic film recycling comparing kerbside and separate collection on laboratory and industrial levelL. Zeilerbauer, J. Langwieser, K. Fazeni-Fraisl, M. Pflügl, J. Lindorfer, D. Schneeberger, C. Ehrengruber, N. Kuhn, H. Aster, C. Paulik, J. FischerCleaner Waste Systems
DOI: 10.1016/j.clwas.2026.100486
AVAW
Impurity distribution and leaching behaviour of spent cement kiln refractories for recycling optimisationF. Feucht, R. Moderegger, S. Neuhold, P. Sedlazeck, R. PombergerCleaner Waste Systems
DOI: 10.1016/j.clwas.2026.100511
AVAW
Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral ImagingN. Kuhn, M. Mager, G. Koinig, J. Geier, J. P. Andreu, J. Fischer, A. Tischberger-AldrianPolymers
DOI: 10.3390/polym18040524
AVAW
The impact of sorting quality on the properties of recycled flexible plastic packagingJ. Langwieser, H. Andrea, N. Kuhn, A. Tischberger-Aldrian, J. FischerClean Technologies and Environmental Policy
DOI: 10.1007/s10098-025-03403-6
KT
Comparative life cycle assessment of one-step and two-step injection molding compounding for manufacturing recycled glass fiber/polypropylene compositesU. Kirschnick, N. KremplJournal of Cleaner Production
DOI: 10.1016/j.jclepro.2026.147916
WBW
Reducing the environmental footprint of cotton T-shirt production through automation and reshoring: a scenario-based comparative life cycle assessmentG. Feichtinger, A. Scherer, W. PoschThe International Journal of Life Cycle Assessment
DOI: 10.1007/s11367-026-02630-3
RIW
Belt-Integrated Monitoring of Tensile Loads in Conveyor BeltsJ. Müller, M. Prenner, N. A. SifferlingerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-026-01703-y
VTiU
Experimental dataset of the reverse water-gas shift reaction in a fixed-bed reactor setup under varying reactor conditionsE. Komatz, M. Andritz, C. MarkowitschData in Brief
DOI: 10.1016/j.dib.2026.112485
KT
Integrating process replicability in the life cycle assessment of manufacturing fiber-reinforced polymer composites: LCA FOR MANUFACTURING AND NANOTECHNOLOGYU. Kirschnick, V. ZellerThe International Journal of Life Cycle Assessment
DOI: 10.1007/s11367-026-02635-y
Publications 2025
AVAWKT
Progress towards composition-based inline sorting and recycling of multilayer polymer packagingM. Bredács, C. Barretta, J. Geier, M. Feuchter, K. Plevová, G. Oreski, G. Koinig, B. V. Csányi, S. GergelySustainable Materials and Technologies
DOI: 10.1016/j.susmat.2025.e01385
KT
A New Approach Using Multi-Layer Films from Food Waste as a Shrink FilmK. Plevová, M. Feuchter, N. Wild, K. Resch-FausterProcesses
DOI: 10.3390/pr13020560
KT
Production of Anisotropic NdFeB Permanent Magnets with In Situ Magnetic Particle Alignment Using Powder ExtrusionS. Rathfelder, S. Schuschnigg, C. Kukla, C. Holzer, D. Suess, C. Burkhardt Materials
DOI: 10.3390/ma18153668
AVAW
Comparative reactivity and microstructural characterization of mineral wastes in alkali activated bindersA. Hassan, S. Radinger, O. Rudic, B. Ratz, F. R. Steindl, F. Mittermayr, A. Jodlbauer, M. Wilkening, C. GrenggConstruction & building materials (Construction and building materials)
DOI: 10.1016/j.conbuildmat.2025.143697
AVAWKT
Detection of degraded high-density polyethylene via near-infrared hyperspectral imagingJ. Geier, C. Barretta, M. Messiha, M. Bredács, F. Arbeiter, G. Koinig, E. Helfer, L. Meinhart, G. OreskiWaste management
DOI: 10.1016/j.wasman.2025.114960
KT
Synthesis and characterization of thermolatent bases with varying activation temperaturesM. U. Mayer-Kriehuber, E. Sattler, D. Reisinger, D. Bautista-Anguís, S. Gaca, C. Schmidleitner, I. Duretek, E. V. A. S. SchlöglRSC Advances
DOI: 10.1039/d5ra05095b
TPT
Measurements for refractory protection in pyrometallurgical recycling of lithium-ion batteriesL. Wiszniewski, Z. Raonic, I. Marschall, A. Schönberg, D. Legenstein, K. Doschek-HeldResults in Materials
TPT
Investigation of the Phosphide Formation for Transition Metals during Carbothermal Reduction of Industrial and Synthetic SlagsC. Gatschlhofer, Z. Raonic, I. Marschall, A. Krammer, K. Doschek-Held, H. RaupenstrauchCircular economy and sustainability
DOI: 10.1007/s43615-025-00549-9
KT
Computational Modeling of the Continuous Separation of a Molten Polymer Mixture in a Centrifugal FieldV. Medvid, H. Steiner, C. Irrenfried, M. Feuchter, G. BrennMacromolecular Theory and Simulations
DOI: 10.1002/mats.202400109
NEM
Bioleaching of Lithium-Ion Battery Black Mass: A Comparative Study on Gluconobacter oxydans and Acidithiobacillus thiooxidansM. Mandl, R. Lerchbammer, E. GeroldMetals : open access journal
DOI: 10.3390/met15101112
WW
Exceptional tolerance of austenitic stainless steels to tramp-impurity contaminationI. Moravcik, A. Zadera, A. Jelinek, M. Feichter, S. Wurster, J. Keckes, P. Kutlesa, V. Pernica, J. Eckert, A. HohenwarterJournal of Materials Research and Technology
DOI: 10.1016/j.jmrt.2025.09.255
AVAW
Lithium-Ionen Batterien: Grenzen und Herausforderungen bei der Berechnung der Recyclingeffizienz von Lithium-Ionen-Batterien im Rahmen der neuen Europäischen BatterieverordnungC. Rutkowski, B. Rutrecht, A. Arnberger, T. Nigl, R. PombergerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-025-01589-2
AVAWTPT
Mineralwolle-Deponierungsverbot und aktuelle EntwicklungenA. Vydrenkova, T. Sattler, J. Krobatschek, K. Doschek-Held, A. Krammer, R. Pomberger, P. SedlazeckÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-025-01182-4
NEM
Hydrogen preserves microstructure to enhance steelmaking dust recyclingM. LeuchtenmüllerCommunications materials
DOI: 10.1038/s43246-025-00980-3
KTRIW
Data-driven prediction of mechanical properties in recycled fibre-reinforced polymer composites: Integrating machine learning with material–processing feature importance analysisZ. Shahroodi, A. Tayebi, A. Moayedi Far, D. Zidar, K. Straka, F. Arbeiter, N. Krempl, C. HolzerJournal of Materials Research and Technology
DOI: 10.1016/j.jmrt.2025.12.062
AVAWVTiU
From Waste to Product: New Circularity by Recovering Polypropylene from Mixed Commercial WasteM. J. Enengel, J. Roitner, L. Kandlbauer, T. Lasch, M. Lehner, R. SarcRecycling
DOI: 10.3390/recycling10040128
ESM
Impact of selected tramp elements in medium carbon steels on the deformation behavior of non-metallic inclusions and phase transformationsJ. Cejka, I. Gruber, G. Klösch, S. K. MichelicJournal of Materials Research and Technology
DOI: 10.1016/j.jmrt.2025.03.150
WBW
Monetization of Life-Cycle based Environmental Impacts: A Case Study on External Environmental Costs of Steel-based Wear Parts for Biogas PlantsG. Feichtinger, W. PoschEnergy storage and saving (e-only)
DOI: 10.1016/j.enss.2025.05.003
KT
Frontal polymerization of thiol-acrylate covalent adaptable networksC. Schmidleitner, M. U. Kriehuber, R. Korotkov, S. Schlögl, E. RosseggerPolymer Chemistry
DOI: 10.1039/d4py01106f
AVAWVTiU
Forecasting the Shredder Output Volume Flow Towards Dynamic Control in Waste ManagementT. Lasch, J. Imhof, L. Kandlbauer, R. Sarc, K. KhodierRecycling
DOI: 10.3390/recycling10030083
NEM
Impact of temperature and gas composition on hydrogen-based zinc recovery from electric arc furnace dustM. Leuchtenmüller, A. KeuschnigInternational Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2025.04.366
AVAW
Technical Evaluation and Recycling Potential of Polyolefin and Paper Separation in Mixed Waste Material Recovery FacilitiesA. M. Lipp, D. Blasenbauer, H. Stipanovic, G. Koinig, A. Tischberger-Aldrian, J. LedererRecycling
DOI: 10.3390/recycling10050176
KT
How impurities affect the lifetime of plastic products - A circularity case study on polymer pipesM. Messiha, J. Geier, C. Barretta, M. Bredács, G. Oreski, T. Kratochvilla, P. Hruszka, F. Arbeiter, G. PinterPolymer Testing
DOI: 10.1016/j.polymertesting.2025.108952
AVAW
Analysing material flows and final fate distribution of spent refractories from steel casting ladles and cement rotary kilns in EuropeF. Feucht, R. Moderegger, S. Neuhold, K. P. SedlazeckResources, Conservation and Recycling
DOI: 10.1016/j.resconrec.2025.108158
AVAW
Federated continual learning for vision-based plastic classification in recyclingS. Shami, J. Aberger, J. Pestana, B. Häcker, R. Sarc, M. KrisperWaste management
DOI: 10.1016/j.wasman.2025.114976
TPT
Advancing the Circular Economy through Construction and Demolition Waste Management for Disaster Risk-Informed Practice: Comparative Insights from Serbia and the European UnionA. Gajović, V. M. Cvetkovi, R. Renner, C. V. D.International Journal of Contemporary Security Studies
VTiU
Kinetic and Process Modeling of Guerbet Coupling Chemistry over Cu-Mg-Al Mixed OxidesJ. Chavarrio Canas, C. Markowitsch, E. Votava, M. Lehner, G. W. HuberEES Catalysis
DOI: 10.1039/D5EY00045A
AVAW
Quantifying Cotton Content in Post-Consumer Polyester/Cotton Blend Textiles via NIR Spectroscopy: Current Attainable Outcomes and Challenges in PracticeH. Stipanovic, G. Koinig, T. Fink, C. B. Schimper, D. Lilek, J. Egan, A. Tischberger-AldrianRecycling
DOI: 10.3390/recycling10040152
KT
Process optimization to produce anisotropic NdFeB permanent magnets from recycled powder via powder extrusionS. Rathfelder, S. Schuschnigg, C. Kukla, C. Holzer, D. Suess, C. BurkhardtScientific reports
DOI: 10.1038/s41598-025-19111-6
ESMTPT
Integrating pyro- and biohydrometallurgy in a green closed-loop lithium-ion battery recycling approachL. Wiszniewski, L. Lalropuia, S. Spiess, P. Presoly, K. Kremser, K. Doschek-Held, G. M. Guebitz, Z. RaonicJournal of environmental chemical engineering
DOI: 10.1016/j.jece.2025.116811
KT
Development of a probe tack method for determining the surface tack of thin-walled rubber filmsS. Amirosanloo, B. Maroh, F. Arbeiter, R. Schaller, S. SchlöglJournal of Rubber Research
DOI: 10.1007/s42464-025-00330-5
AVAW
Prototype of AI-powered assistance system for digitalisation of manual waste sortingJ. Aberger, S. Shami, B. Häcker, J. Pestana, K. Khodier, R. SarcWaste management
DOI: 10.1016/j.wasman.2025.01.027
TPT
Pre-treatment Strategies for Efficient Pyrometallurgical Recycling of Lithium-Ion Batteries within the InduRed ReactorL. Wiszniewski, L. Jüttner, Z. Raonic, A. Arnberger, J. Müller, K. Doschek-Held, H. Raupenstrauch, L. SchmidtBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-025-01594-5
KT
Innovative approaches to hydrogen storage in vinyl aromatic polymersM. Sharifian, W. Kern, G. RießInternational Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2025.06.182
KT
Influence of reprocessing on monopolymer blends of polyhydroxybutyrate (PHB)P. Main, S. Schulnig, I. Duretek, T. LucyshynPolymer Testing
DOI: 10.1016/j.polymertesting.2025.108857
TPT
Investigation of thermokinetics in carbo- and aluminothermic reduction of synthesized lithium iron phosphate black massL. Wiszniewski, Z. Raonic, B. Nuraeni, I. Marschall, B. Satritama, A. Rhamdhani, S. RieselJournal of Cleaner Production
DOI: 10.1016/j.jclepro.2025.145357
AVAW
Effects of surface contamination on automated textile sorting using NIR-spectroscopyH. Stipanovic, G. Koinig, T. Fink, A. Tischberger-AldrianWaste management
DOI: 10.1016/j.wasman.2025.115227
NEM
Impurity-induced phase transformations in AlMgZn(Cu) crossover alloys: Pathways to enhance recycling content and processabilityS. Samberger, I. Weißensteiner, M. A. Tunes, L. Stemper, C. Kainz, R. Morak, P. J. Uggowitzer, S. PogatscherJournal of manufacturing processes
DOI: 10.1016/j.jmapro.2025.06.106
AVAW
Upgrading and Characterization of Glass Recovered from MSWI Bottom Ashes from Fluidized Bed CombustionJ. Mühl, S. Mika, A. Tischberger-Aldrian, J. LedererRecycling
DOI: 10.3390/recycling10020063
NEM
Effects of composition, recycling and processing on deep drawing performance of automotive 6016 aluminium sheetsA. Thum, E. Hodžić, J. Domitner, S. PogatscherCIRP Journal of Manufacturing Science and Technology
DOI: 10.1016/j.cirpj.2025.12.012
NEM
Processing of Used Aluminium Coffee Capsules as a Contribution to Closed-Loop RecyclingS. Wibner, S. Samberger, S. Tichy, H. AntrekowitschAspects in Mining & Mineral Science
DOI: 10.31031/AMMS.2025.14.000838
AVAW
Materialcharakterisierung gebrauchter Feuerfeststeine als Schlüssel für das effektive Training von Sensoren: (Praxisbeispiele aus dem Projekt ReSoURCE)F. Feucht, S. Neuhold, A. Leitner, C. Fricke-Begemann, J. Hernandez, V. Mörkens, K. P. SedlazeckBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-025-01577-6
CH
A post-ophiolitic plutonism record in the Central-East Iranian Microcontinent: Evidence for Pre-Eocene age of Neo-Tethys subductionM. Ghadirpour, G. Torabi, N. Shirdashtzadeh, T. C. Meisel, T. MorishitaJournal of African earth sciences
DOI: 10.1016/j.jafrearsci.2025.105628
AVAW
recAIcle: An Intelligent Assistance System for Manual Waste Sorting—Validation and ScalabilityJ. Aberger, L. Brensberger, J. Pestana, G. Sopidis, B. Häcker, M. Haslgrübler, R. SarcRecycling
DOI: 10.3390/recycling10060221
RIW
From logs to layers: Framework for interpreting subsurface facies in Iceland geothermal reservoirsA. Hammoud, M. Villeneuve, E. Caspari, A. K. MortensenGeothermics
DOI: 10.1016/j.geothermics.2025.103474
ESM
Zn recovery from steel mill EAF dusts: A two-step biotechnological approachR. Frueholz, S. Spiess, J. Eisbacher-Lubensky, C. Habermaier, G. M. Guebitz, J. Mueller, M. HaberbauerResources, Conservation and Recycling Advances
DOI: 10.1016/j.rcradv.2025.200278
AVAW
Evaluation of mineral waste streams for alkali-activated materials: Reactivity and utilization potentialB. Ratz, F. R. Steindl, A. Hassan, S. Radinger, S. Raic, K. P. Sedlazeck, C. GrenggJournal of Building Engineering
DOI: 10.1016/j.jobe.2025.114705
CH
Evaluation of Six Phosphorus Extraction Methods for Compliance Testing of Recycled P FertilizersA. Hernandez-Mora, O. Duboc, E. K. Bünemann, K. Ylivainio, E. Lombi, S. Symanczik, D. Horn, A. Delgado, N. Abu Zahra, L. Zuin, C. L. Doolette, H. Eigner, J. Santner Environmental technology & innovation (OA)
DOI: 10.1016/j.eti.2024.103913
WW
A New Recycling Technology to Produce Premixed Thermal Insulating Mortars from Polyurethane Waste FoamsA. Kountouris, K. Efstathiou, N. Kostoglou, D. Manolakos, C. RebholzPolymers
DOI: 10.3390/polym17162233
AVAWVTiU
Particle Size Distribution of Materials and Chemical Element Composition in Mixed Commercial WasteM. Enengel, T. Lasch, L. Kandlbauer, S. A. Viczek, R. Pomberger, R. SarcWaste
DOI: 10.3390/waste3010009
CH
A possible volcanic origin for the Greenland ice core Pt anomaly near the Bølling-Allerød/Younger Dryas boundaryC. E. Green, J. U. L. Baldini, R. J. Brown, A. N. U. Schmincke, M. Edmonds, T. C. MeiselPLOS ONE
DOI: 10.1371/journal.pone.0331811
Publications 2024
KT
Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of VulcanizatesM. Traintinger, M. Azevedo, R. C. Kerschbaumer, B. Lechner, T. LucyshynPolymers
DOI: 10.3390/polym16142033
AVAW
Determination and improvement of the quality of separately collected bio-waste from householdsJ. Adam, M. Wellacher, F. Azizi, A. Loidl, A. Zöscher, F. Poschacher, R. Pomberger, A. Tischberger-AldrianWaste management & research
DOI: 10.1177/0734242X241259895
KT
Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative AnalysisB. Ravindran, T. Agathocleous, B. Oswald-Tranta, E. Fauster, M. Feuchter Journal of composites science
DOI: 10.3390/jcs8040126
RIW
Kontamination von Haufwerk durch Sprengmittel und DieselmotoremissionenE. Hauzinger, R. Galler, M. GansterBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-024-01529-6
ESM
Influence of Tramp Elements on Surface Properties of Liquid Medium-Carbon SteelsJ. Cejka, B. Sammer, I. Gruber, S. K. MichelicSteel research international
DOI: 10.1002/srin.202300715
KT
Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applicationsC. Clute, W. Balasooriya, N. Cano Murillo, G. Theiler, A. Kaiser, M. Fasching, T. Schwarz, A. Hausberger, G. Pinter, S. SchlöglInternational Journal of Hydrogen Energy
DOI: 10.1016/j.ijhydene.2024.04.133
NEM
Overview on aluminium alloys as sinks for end-of-life vehicle scrapS. Pogatscher, S. SambergerIOP Conference Series: Materials Science and Engineering
DOI: 10.1088/1757-899x/1315/1/012008
AVAW
Biodegradable plastics – Where to throw? A life cycle assessment of waste collection and management pathways in AustriaN. Mhaddolkar, C. Lodato, A. Tischberger-Aldrian, D. Vollprecht, T. Fruergaard AstrupWaste management
DOI: 10.1016/j.wasman.2024.10.018
AVAWTPT
Recycling of Potential Hazardous Stone Wool into a Non-Hazardous New Stone WoolT. M. Sattler, K. Doschek-Held, A. Krammer, R. Pomberger, D. VollprechtDetritus
DOI: 10.31025/2611-4135/2024.18355
RIW
Physical and mechanical depth relationships of rocks from the Rotokawa Geothermal Reservoir, Taupō Volcanic Zone, New ZealandM. Villeneuve, T. Jones, M. J. Heap, B. Kennedy, J. W. Cole, P. A. SiratovichNew Zealand journal of geology and geophysics
DOI: 10.1080/00288306.2024.2424847
AVAW
Effect of Surface Contamination on Near-Infrared Spectra of Biodegradable PlasticsN. Mhaddolkar, G. Koinig, D. Vollprecht, T. F. Astrup, A. Tischberger-AldrianPolymers
DOI: 10.3390/polym16162343
CH
Forearc magmatism in the Pannonian basin recorded by metasomatised skarnoid xenoliths in Pliocene basalt (Novohrad-Gemer Volcanic Field, Slovakia)L. Reato, M. Huraiová, L. Ackerman, J. Ďurišová, M. Horschinegg, P. Konečný, T. C. Meisel, V. HuraiLithos
DOI: 10.1016/j.lithos.2024.107741
AVAW
Recovery of plastic packaging from mixed municipal solid waste. A case study from AustriaD. Blasenbauer, A. M. Lipp, J. Fellner, A. Tischberger-Aldrian, H. Stipanovic, J. LedererWaste management
DOI: 10.1016/j.wasman.2024.02.040
CH
Evaluation of X-ray fluorescence for analysing critical elements in three electronic waste matrices: A comprehensive comparison of analytical techniquesS. Lancaster, E. Sahlin, M. Oelze, M. Ostermann, J. Vogl, V. Laperche, S. Touze, J. P. Ghestem, C. Dalencourt, R. Gendre, J. Stammeier, O. Klein, D. Pröfrock, G. Košarac, A. Jotanovic, L. Bergamaschi, M. Di Luzio, G. D'Agostino, R. J. A. M. Eberhard, L. Feiner, S. Trimmel, A. Rachetti, T. Sara-Aho, A. Röthke, L. Michaliszyn, A. Pramann, O. Rienitz, J. IrrgeherWaste management
DOI: 10.1016/j.wasman.2024.10.015
KT
Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical glovesT. Grabmayer, J. Manhart, D. Fleischmann, S. Kaiser, R. Schaller, A. Holzner, S. SchlöglJournal of applied polymer science
DOI: 10.1002/app.55498
KT
Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate\textquoterights PropertiesK. Hinterberger, P. Main, C. Waly, T. LucyshynJournal of polymers and the environment
DOI: 10.1007/s10924-024-03425-z
KT
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled PolypropyleneZ. Shahroodi, N. Krempl, D. Zidar, T. Mayrhofer, U. Kirschnick, F. Arbeiter, I. Duretek, C. HolzerACS Sustainable Chemistry and Engineering
DOI: 10.1021/acssuschemeng.4c04645
CH
Fertilization efficiency of thirty marketed and experimental recycled phosphorus fertilizersA. Hernandez-Mora, O. Duboc, E. Lombi, E. K. Bünemann, K. Ylivainio, S. Symanczik, A. Delgado, N. Abu Zahra, J. Nikama, L. Zuin, C. L. Doolette, H. Eigner, J. SantnerJournal of Cleaner Production
DOI: 10.1016/j.jclepro.2024.142957
KT
Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced compositesH. Sharma, V. Bijalwan, A. H. I. Mourad, A. Kumar, S. Schlögl, S. RanaJournal of Reinforced Plastics and Composites
DOI: 10.1177/07316844241295848
VTiU
Usefulness of Lumped Kinetic ModelingS. M. Lorbach, A. Lechleitner, F. Zapf, M. LehnerChem & bio engineering
DOI: 10.1021/cbe.4c00032
KT
Design of Reversible Adhesives by Using a Triple Function of Ionic LiquidsF. Wanghofer, M. Kriehuber, D. Reisinger, F. Floh, M. Wolfahrt, S. SchlöglMacromolecular materials and engineering
DOI: 10.1002/mame.202400011
TPT
Evaluating refractory material performance in pyrometallurgical recycling of lithium-ion batteries under a reducing atmosphereL. Wiszniewski, I. Marschall, T. Hochsteiner, T. McFarlane Hoad, K. Doschek-Held, H. RaupenstrauchCeramics International
DOI: 10.1016/j.ceramint.2024.08.220
KT
Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniquesJ. Krämer, G. D. C. Guedes de la Cruz, W. Kern, J. Roitner, A. Witschnigg, F. Rittmannsberger, K. SchnetzingerRadiation physics and chemistry
DOI: 10.1016/j.radphyschem.2024.111846
CH
In-use dissipation of technology-critical elements from vehicles and renewable energy technologies in Vienna, Austria: A public health matter?A. Baumgart, D. Haluza, T. Prohaska, S. Trimmel, U. Pitha, J. Irrgeher, D. WiedenhoferJournal of industrial ecology
DOI: 10.1111/jiec.13571
AVAWTPT
Recycling of mineral wool waste as supplementary cementitious material through thermochemical treatmentK. Doschek-Held, A. Krammer, F. R. Steindl, T. M. Sattler, J. JuhartWaste Management and Research
DOI: 10.1177/0734242X241237199
AVAW
Kreislauforientierte Betrachtung zur Verbesserung der Kompostqualität aus biogenen Abfällen aus der HaushaltssammlungJ. Adam, M. Wellacher, A. Loidl, G. Kreindl, A. Zöscher, E. Dvorak, V. SchmidÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-024-01102-y
RIW
Integration von Technologien für mehr Transparenz in LieferkettenP. Fernandez Munoz, M. Tost, V. E. Dietrich, F. Melcher, W. KloppmannBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-024-01448-6
KT
Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion MouldingS. Rathfelder, S. Schuschnigg, C. Kukla, C. Holzer, C. BurkhardtJournal of Manufacturing and Materials Processing
DOI: 10.3390/jmmp8020081
AVAW
Deep learning approaches for classification of copper-containing metal scrap in recycling processesG. Koinig, N. E. Kuhn, T. Fink, B. Lorber, Y. Radmann, W. Martinelli, A. Tischberger-AldrianWaste management
DOI: 10.1016/j.wasman.2024.10.022
AVAWCH
Development and application of reference and routine analytical methods providing SI-traceable results for the determination of technology-critical elements in PCB from WEEEG. D'Agostino, M. Oelze, J. Vogl, J. P. Ghestem, N. Lafaurie, O. Klein, D. Pröfrock, M. Di Luzio, L. Bergamaschi, R. J. A. C. Oster, J. Irrgeher, S. Lancaster, A. Walch, A. Röthke, L. Michaliszyn, A. Pramann, O. Rienitz, T. Sara-Aho, O. Cankur, D. Kutan, J. NoireauxJournal of analytical atomic spectrometry
DOI: 10.1039/d4ja00235k
KT
Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality predictionM. Traintinger, R. C. Kerschbaumer, M. Hornbachner, B. Lechner, T. LucyshynJournal of applied polymer science
DOI: 10.1002/app.54901
AVAW
Critical properties of plastic packaging waste for recycling: A case study on non-beverage plastic bottles in an urban MSW system in AustriaL. Gritsch, G. Breslmayer, R. Rainer, H. Stipanovic, A. Tischberger-Aldrian, J. LedererWaste management
DOI: 10.1016/j.wasman.2024.05.035
KT
Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materialsH. Sharma, M. Bender, G. Kim, D. Lee, C. Caglayan, S. Schlögl, G. J. Yun, A. Kumar, S. RanaJournal of Applied Polymer Science
DOI: 10.1002/app.56074
NEM
Supply security beyond mines and scrap recycling: valorization potential of metallurgical residuesS. Steinlechner, K. WittPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
DOI: 10.1098/rsta.2023.0237
Publications 2023
KT
Computational modelling of the separation of molten polymer blends by a centrifugal techniqueV. Medvid, H. Steiner, C. Irrenfried, M. Feuchter, G. BrennJournal of polymer research
DOI: 10.1007/s10965-023-03682-x
RIW
Lithium und Cobalt – Chancen und Probleme in Bezug auf zwei kritische Rohstoffe in der EUC. Lughofer, M. TostBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01369-w
RIW
Citric Acid Leaching of Industrial BOF SlagsA. Böhm, G. Hartig, G. SchinnerlBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01341-8
NEM
Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigmP. Krall, I. Weißensteiner, S. PogatscherResources, Conservation and Recycling
DOI: 10.1016/j.resconrec.2023.107370
ESM
Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction ProcessD. Ernst, U. Manzoor, I. R. Souza Filho, M. A. Zarl, J. SchenkMetals
DOI: 10.3390/met13030558
RIW
Unravelling calcite-to-aragonite evolution from a subsurface fluid - Formation pathway, interfacial reactions and nucleation effectsS. Eichinger, R. Boch, A. Baldermann, K. Goetschl, R. Wenighofer, R. Hoffmann, F. Stamm, D. Hippler, C. Grengg, A. Immenhauser, M. DietzelChemical geology
DOI: 10.1016/j.chemgeo.2023.121768
NEM
Bio-metallurgical recovery of lithium, cobalt, and nickel from spent NMC lithium ion batteries: A comparative analysis of organic acid systemsE. Gerold, F. Kadisch, R. Lerchbammer, H. Antrekowitsch Journal of hazardous materials advances
DOI: 10.1016/j.hazadv.2023.100397
RIW
Characterizing lithological, weathering, and hydrothermal alteration influences on volcanic rock properties via spectroscopy and laboratory testing: a case study of Mount Ruapehu volcano, New ZealandŁ. N. Schaefer, G. Kereszturi, B. Kennedy, M. VilleneuveBulletin of volcanology
DOI: 10.1007/s00445-023-01657-w
NEM
Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteriesE. Gerold, R. Lerchbammer, C. Strnad, H. AntrekowitschHydrometallurgy
DOI: 10.1016/j.hydromet.2023.106187
NEM
Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Friendly Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active MaterialR. Lerchbammer, E. Gerold, H. AntrekowitschMetals : open access journal
DOI: 10.3390/met13081330
RIW
Porosity, strength, and alteration – Towards a new volcano stability assessment tool using VNIR-SWIR reflectance spectroscopyG. Kereszturi, M. J. Heap, Ł. N. Schaefer, H. Darmawan, F. M. Deegan, B. Kennedy, J. C. Komorowski, S. Mead, M. Rosas-Carbajal, A. Ryan, V. R. Troll, M. Villeneuve, T. R. WalterEarth and planetary science letters
DOI: 10.1016/j.epsl.2022.117929
KT
Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipesL. Trávníček, J. Poduška, M. Messiha, F. Arbeiter, G. G. Pinter, L. Náhlḱ, P. HutařEngineering Fracture Mechanics
DOI: 10.1016/j.engfracmech.2023.109423
RIW
Sensorgestützte Sortierung: In der Rohstoffbranche werden die Karten neu gemischtS. Jürgensen, H. FlachbergerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01349-0
AVAW
Inline classification of polymer films using Machine learning methodsG. Koinig, N. E. Kuhn, T. Fink, E. Grath, A. Tischberger-AldrianWaste management
DOI: 10.1016/j.wasman.2023.11.028
AVAW
Sortierung von Mehrschichtfolien durch Anwendung von Transflektion und Machine-Learning-AnsätzenG. Koinig, N. E. Kuhn, A. Tischberger-AldrianÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-023-01000-9
KT
Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite MoldingB. Ravindran, M. Feuchter, R. Schledjewski Journal of composites science
DOI: 10.3390/jcs7030122
AVAW
Automatisierte Textilsortierung – Status quo, Herausforderungen und PerspektivenA. Tischberger-Aldrian, H. Stipanovic, N. E. Kuhn, T. Bäck, D. Schwartz, G. KoinigÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-023-01004-5
AVAW
COMET Module FuLIBatteR – Auf der Suche nach der besten Lösung für das Recycling von Lithium-Ionen-Batterien der ZukunftB. Rutrecht, J. Rieger, T. NiglBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01368-x
CH
How to verify the precision of density-functional-theory implementations via reproducible and universal workflowsE. Bosoni, L. Beal, M. Bercx, P. Blaha, S. Blügel, J. Bröder, M. Callsen, S. Cottenier, A. Degomme, V. Dikan, K. Eimre, E. Flage-Larsen, M. Fornari, A. Garcia, L. Genovese, M. Giantomassi, S. P. Huber, H. Janssen, G. Kastlunger, M. Krack, G. Kresse, T. D. Kühne, K. Lejaeghere, G. K. H. Madsen, M. Marsman, N. Marzari, G. Michalicek, H. Mirhosseini, T. M. A. Müller, G. Petretto, C. J. Pickard, S. Poncé, G. M. Rignanese, O. Rubel, T. Ruh, M. Sluydts, D. E. P. Vanpoucke, S. Vijay, M. Wolloch, D. Wortmann, A. Yakutovich, J. Yu, A. Zadoks, B. Zhu, G. PizziNature Reviews Physics
DOI: 10.1038/s42254-023-00655-3
AVAW
Einflüsse von Kreislaufwirtschaftsmaßnahmen auf Ressourcennutzung und Dekarbonisierung in der Stahl- und ZementindustrieP. Haslauer, R. Pomberger, T. Nigl, M. Rahnama Mobarakeh, E. Lachner, T. KienbergerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01366-z
RIW
Bergbaukunde, quo vadis?M. Tost, P. Hartlieb, C. Heiss, B. Knoll, T. Ladinig, G. Mayer, P. Moser, M. Prenner, N. A. Sifferlinger, A. Moser-TscharfBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-023-01322-x
KT
Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and PolypropyleneP. Main, S. Petersmann, N. Wild, M. Feuchter, I. Duretek, M. Edeleva, P. Ragaert, L. Cardon, T. LucyshynPolymers
DOI: 10.3390/polym15204126
AVAW
Determining the recycled content in cement: A study of Austrian cement plantsM. Enengel, S. A. Viczek, R. SarcResources, Conservation and Recycling
DOI: 10.1016/j.resconrec.2023.107276
AVAW
Digitalisierung der Handsortierung durch Künstliche Intelligenz, Machine Learning und Human Machine InteractionJ. Aberger, K. Khodier, R. SarcÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-023-01002-7
NEM
Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behavior of NMC-Based Black MassE. Gerold, R. Lerchbammer, H. AntrekowitschMetals : open access journal
DOI: 10.3390/met13040785
KT
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic ScenariosU. Kirschnick, Z. Shahroodi, N. Krempl, R. Schledjewski WSEAS transactions on environment and development
DOI: 10.37394/232015.2023.19.117
Publications 2022
RIW
Formsteine – Eine technische Lösung, um kupferhaltige Rest- und Kreislaufstoffe ofengängig zu machenL. Marousek, A. Böhm, T. Tripolt, J. PeslBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-022-01262-y
KT
Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristicsT. Stiller, M. Berer, A. D. K. Katta, B. Haar, E. Truszkiewicz, W. Kraschitzer, H. Stepanvosky, G. G. Pinter, J. M. LacknerAdditive Manufacturing
DOI: 10.1016/j.addma.2022.102987
KT
Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardantsC. Bascucci, I. Duretek, S. Lehner, C. Holzer, S. Gaan, R. Hufenus, A. GooneiePolymer Degradation and Stability
DOI: 10.1016/j.polymdegradstab.2021.109783
RIW
Hydrothermally induced edifice destabilisation: The mechanical behaviour of rock mass surrounding a shallow intrusion in andesitic lavas, Pinnacle Ridge, Ruapehu, New ZealandS. P. Mordensky, M. Villeneuve, B. M. Kennedy, J. D. StruthersEngineering Geology
DOI: 10.1016/j.enggeo.2022.106696
GK
Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)Y. Zhou, X. Zhang, G. Zhong, J. Zhang, Y. Yang, D. Kang, H. Li, W. Jie, P. Schumacher, J. LIJournal of alloys and compounds
DOI: 10.1016/j.jallcom.2022.164446
NEM
A Sustainable Approach for the Recovery of Manganese from Spent Lithium-Ion Batteries via Photocatalytic OxidationE. Gerold, H. AntrekowitschInternational Journal of Materials Science and Applications
NEM
Selective Chlorination and Extraction of Valuable Metals from Iron Precipitation ResiduesL. Höber, K. Witt, S. SteinlechnerApplied Sciences : open access journal
DOI: 10.3390/app12073590
GK
Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloysX. Zhang, Y. Zhou, G. Zhong, J. Zhang, Y. Chen, W. Jie, P. Schumacher, J. LIJournal of materials science
DOI: 10.1007/s10853-022-07045-7
RIW
Verantwortungsvolle Beschaffung im Bereich der erneuerbaren Energien - Realität oder noch ein weiter Weg?M. T. Kügerl, M. TostBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-022-01209-3
RIW
Sustainable Consumption and Production in the Extraction and Processing of Raw Materials—Measures Sets for Achieving SDG Target 12.2P. Trummer, G. Ammerer, M. ScherzSustainability
DOI: 10.3390/su141710971
RIWTPT
A Combined Hydro-Mechanical and Pyrometallurgical Recycling Approach to Recover Valuable Metals from Lithium-Ion Batteries Avoiding Lithium SlaggingA. Holzer, J. Zimmermann, L. Wiszniewski, T. Necke, C. Gatschlhofer, W. Öfner, H. RaupenstrauchBatteries
DOI: 10.3390/batteries9010015
AVAW
Selective delamination by milling as a first step in the recycling of photovoltaic modulesT. Dobra, F. Thajer, G. Wiesinger, D. Vollprecht, R. PombergerEnvironmental technology
DOI: 10.1080/09593330.2022.2061380
TPT
Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFPA. Holzer, L. Wiszniewski, S. Windisch-Kern, H. RaupenstrauchMetals
DOI: 10.3390/met12101642
ESM
Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges RecyclingS. Dworak, J. Fellner, M. Beermann, M. Häuselmann, J. Schenk, S. K. Michelic, J. Cejka, A. Sakic, J. Mayer, K. SteiningerÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-022-00903-3
RIW
Tunnelausbruchverwertung am FCC - Future Circular Collider in CERNR. Galler, E. HauzingerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-022-01299-z
AVAWRIW
Lifecycle Assessment for Recycling Processes of Monolayer and Multilayer Films: A ComparisonG. Koinig, E. Grath, C. Barretta, K. Friedrich, D. Vollprecht, G. OreskiPolymers
DOI: 10.3390/polym14173620
NEM
Critical Evaluation of the Potential of Organic Acids for the Environmentally Friendly Recycling of Spent Lithium-Ion BatteriesE. Gerold, H. Antrekowitsch, C. SchinnerlRecycling
DOI: 10.3390/recycling7010004
CH
Determination of Re, Os, Ir, Ru, Pt, Pd Mass Fractions and Os-187/Os-188 Ratios of Organic-Rich Geological Reference MaterialsM. Wang, Z. Chu, T. C. Meisel, J. GuoGeostandards and Geoanalytical Research
DOI: 10.1111/ggr.12423
AVAW
Influence of reflective materials, emitter intensity and foil thickness on the variability of near-infrared spectra of 2D plastic packaging materialsG. Koinig, K. Friedrich, B. Rutrecht, G. Oreski, C. Barretta, D. VollprechtWaste management
DOI: 10.1016/j.wasman.2021.12.019
KT
Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical propertiesB. Van de Voorde, A. Katalagarianakis, S. Huysman, A. Toncheva, J. M. Raquez, I. Duretek, C. Holzer, L. Cardon, K. V. Bernaerts, D. Van Hemelrijck, L. Pyl, S. Van VlierbergheAdditive Manufacturing
DOI: 10.1016/j.addma.2021.102518
AVAW
Thermal delamination of end-of-life crystalline silicon photovoltaic modulesT. Dobra, D. Vollprecht, R. PombergerWaste management & research
DOI: 10.1177/0734242X211038184
VTiU
Phosphate Fixation and P Mineralogy on Natural and Ca-Modified Zeolites During Simultaneous Nutrient RemovalK. Stocker, M. EllersdorferWater, air, and soil pollution
DOI: 10.1007/s11270-022-05509-9
ESM
Hydrogen plasma smelting reduction process monitoring with optical emission spectroscopy – Establishing the basis for the methodH. Pauna, D. Ernst, M. Zarl, M. Aula, J. Schenk, M. Huttula, T. FabritiusJournal of Cleaner Production
DOI: 10.1016/j.jclepro.2022.133755
NEM
Influence of Different Carbon Content on Reduction of Zinc Oxide via Metal BathM. Auer, J. Antrekowitsch, C. WölflerApplied Sciences : open access journal
DOI: 10.3390/app12020664
TPT
Influence of Impurities on the High-Temperature Behavior of the Lithium-Ion Battery Cathode Material NMC Under Reducing Conditions for Use in the INDURED Reactor ConceptA. Holzer, M. Baldauf, L. Wiszniewski, S. Windisch-Kern, H. RaupenstrauchDetritus
DOI: 10.31025/2611-4135/2022.15215
ESM
How to increase scrap recyclingM. Häuselmann, J. Rieger, J. Schenk, R. Schnitzer, A. Sakic, S. K. Michelic, J. CejkaSteel times international
AVAW
Latent Recycling Potential of Multilayer Films in Austrian Waste ManagementG. Koinig, B. Rutrecht, K. Friedrich, C. Barretta, D. VollprechtPolymers
DOI: 10.3390/polym14081553
AVAW
„ReWaste4.0“ – Abfallwirtschaftliches Kompetenzzentrum am AVAW der Montanuniversität LeobenR. Sarc, R. PombergerÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-021-00814-9
Publications 2021
AVAWWBW
Challenges to Increase Plastic Sorting EfficiencyK. Friedrich, G. Koinig, K. Tschiggerl, R. Pomberger, D. VollprechtInternational Journal on Engineering Technologies and Informatics
DOI: 10.51626/ijeti.2021.02.00023
AVAW
Assessment of Technological Developments in Data Analytics for Sensor-Based and Robot Sorting Plants Based on Maturity Levels to Improve Austrian Waste Sorting PlantsK. Friedrich, T. Fritz, G. Koinig, R. Pomberger, D. VollprechtSustainability
DOI: 10.3390/su13169472
RIW
Calculating the cohesion and internal friction angle of volcanic rocks and rock massesM. Villeneuve, M. J. HeapVolcanica
DOI: 10.30909/vol.04.02.279293
RIW
Nachhaltige Entwicklungsziele – Der Beitrag der Montanuniversität zur Erstellung eines Optionenpapiers für die österreichische BundesregierungP. TrummerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01156-5
NEM
Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic ModelM. Leuchtenmüller, C. Legerer, U. Brandner, J. AntrekowitschMetallurgical and materials transactions. B, Process metallurgy and materials processing science
DOI: 10.1007/s11663-020-02047-9
NEM
Separation and Efficient Recovery of Lithium from Spent Lithium-Ion BatteriesE. Gerold, S. Luidold, H. AntrekowitschMetals : open access journal
DOI: 10.3390/met11071091
RIW
Determining physical and mechanical volcanic rock properties via reflectance spectroscopyŁ. N. Schaefer, G. Kereszturi, M. Villeneuve, B. KennedyJournal of volcanology and geothermal research
DOI: 10.1016/j.jvolgeores.2021.107393
RIW
Sieben Jahre EIT RawMaterials Regional Center in Leoben – Rohstoffforschung im Kontext Globaler EntwicklungH. Bertignoll, S. FeielBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01163-6
AVAW
Die sieben Kerneinflussfaktoren auf die Weiterentwicklung von Produktionsanlagen im SchrottrecyclingT. Kraffczyk, R. PombergerBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01094-2
TPT
Pyrometallurgical Lithium-Ion-Battery Recycling: Approach to Limiting Lithium Slagging with the InduRed Reactor ConceptS. Windisch-Kern, A. Holzer, C. Ponak, H. RaupenstrauchProcesses : open access journal
DOI: 10.3390/pr9010084
AVAWVTiU
Wet-mechanical processing of a plastic-rich two-dimensional-fraction from mixed wastes for chemical recyclingS. Möllnitz, M. Bauer, D. Schwabl, R. SarcWaste Management & Research: The Journal for a Sustainable Circular Economy
DOI: 10.1177/0734242X21996435
AVAWKT
Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for RecyclingS. Möllnitz, M. Feuchter, I. Duretek, G. Schmidt, R. Pomberger, R. SarcPolymers
DOI: 10.3390/polym13030457
CHNEM
Studies on the Formation and Processing of Aluminium Dross with Particular Focus on Special MetalsS. Wibner, H. Antrekowitsch, T. C. MeiselMetals
DOI: 10.3390/met11071108
TPT
A Novel Pyrometallurgical Recycling Process for Lithium-IonBatteries and Its Application to the Recycling of LCO and LFPA. Holzer, S. Windisch-Kern, C. Ponak, H. RaupenstrauchMetals : open access journal
DOI: 10.3390/met11010149
RIW
Alteration-Induced Volcano Instability at La Soufriere de Guadeloupe (Eastern Caribbean)M. J. Heap, T. Baumann, M. Rosas-Carbajal, J. C. Komorowski, A. Gilg, M. Villeneuve, R. Moretti, P. Baud, L. Carbillet, C. Harnett, T. ReuschléJournal of geophysical research
DOI: 10.1029/2021JB022514
AVAW
The "ReWaste4.0" Project - A ReviewR. SarcProcesses : open access journal
DOI: 10.3390/pr9050764
KT
Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysisM. Bredács, C. Barretta, Ł. F. Castillon, A. Frank, G. Oreski, G. Pinter, S. GergelyPolymer Testing
DOI: 10.1016/j.polymertesting.2021.107406
RIW
Challenges of Tunnelling in Volcanic Rock MassesM. VilleneuveBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01175-2
AVAW
The EU Training Network for Resource Recovery through Enhanced Landfill Mining—A ReviewD. Vollprecht, L. Machiels, P. T. JonesProcesses : open access journal
DOI: 10.3390/pr9020394
VTiU
Advancing Plastic Recycling by Wet-Mechanical Processing of Mixed Waste FractionsD. Schwabl, M. Bauer, M. LehnerProcesses : open access journal
DOI: 10.3390/pr9030493
KT
Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing KineticsM. Traintinger, K. Roman Christopher, B. Lechner, W. Friesenbichler, T. LucyshynPolymers
DOI: 10.3390/polym13030380
VTiU
Weiterentwicklung einer nass-mechanischen Aufbereitungsanlage zur Gewinnung von hochreinen Polyolefinkonzentraten für ein chemisches und mechanisches RecyclingD. Schwabl, M. Bauer, P. Köhldorfer, M. LehnerÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-021-00812-x
AVAW
Employement effects of different municipal waste treatment systems based on data from AustriaR. Pomberger, M. Altendorfer, U. GelbmannDetritus
DOI: 10.31025/2611-4135/2021.15090
NEM
Potenzialabschätzung von Synergieeffekten zur simultanen Rückgewinnung von Wertmetallen aus komplexen, metallhaltigen ReststoffenE. Gerold, H. AntrekowitschÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-021-00822-9
TPT
Recycling von Lithium-Ionen-Batterien: Herausforderungenund aktuelle ForschungsergebnisseS. Windisch-Kern, A. Holzer, C. Ponak, P. Nagovnak, H. RaupenstrauchBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01091-5
NEM
MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum RecyclingM. Woschank, B. J. Ralph, A. Kaiblinger, P. Miklautsch, C. Pacher, M. Sorger, H. Zsifkovits, M. Stockinger, S. Pogatscher, T. Antretter, H. AntrekowitschBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01119-w
AVAW
Über theoretische und reale RecyclingfähigkeitR. PombergerÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-020-00721-5
AVAWNEMTPT
Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependenciesS. Windisch-Kern, E. Gerold, T. Nigl, A. Jandric, M. Altendorfer, B. Rutrecht, S. Scherhaufer, H. Raupenstrauch, R. Pomberger, H. Antrekowitsch, F. PartWaste management
DOI: 10.1016/j.wasman.2021.11.038
AVAW
Recycling von MultilayerfolienG. Koinig, B. Rutrecht, D. VollprechtÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW
DOI: 10.1007/s00506-021-00813-w
KT
Suitability of Recycled PLA Filament Application in Fused Filament Fabrication ProcessT. Breški, L. Hentschel, D. Godec, I. DuretekTechnical journal : scientific professional journal of University North
DOI: 10.31803/tg-20210805120621
TPT
Thermal analysis of lithium ion battery cathode materials for the development of a novel pyrometallurgical recycling approachS. Windisch-Kern, A. Holzer, C. Ponak, T. Hochsteiner, H. RaupenstrauchCarbon Resources Conversion
DOI: 10.1016/j.crcon.2021.04.005
AVAW
Lithium-Ionen-Batterien – Kreislaufwirtschaftliche Herausforderungen am Ende des Lebenszyklus und im RecyclingT. Nigl, B. Rutrecht, M. Altendorfer, S. Scherhaufer, I. Meyer, M. Sommer, P. BeiglBerg- und hüttenmännische Monatshefte : BHM
DOI: 10.1007/s00501-021-01087-1
©MUL/Burtscher