Veröffentlichungen
Überblick der wichtigsten Veröffentlichungen im Themenbereich Recycling
Publications 2026
VTiU
Comparative techno-economic assessment of CO2-based SAF pathways: Fischer-Tropsch, methanol-to-jet and ethanol-to-jet across three global regions: EU, USA and Middle EastFuelDOI: 10.1016/j.fuel.2026.139021
AVAW
Life Cycle Assessment of plastic film recycling comparing kerbside and separate collection on laboratory and industrial levelCleaner Waste SystemsDOI: 10.1016/j.clwas.2026.100486
AVAW
Impurity distribution and leaching behaviour of spent cement kiln refractories for recycling optimisationCleaner Waste SystemsDOI: 10.1016/j.clwas.2026.100511
AVAW
Assessing Melt Flow Rate in Post-Consumer Polypropylene via Near-Infrared Hyperspectral ImagingPolymersDOI: 10.3390/polym18040524
AVAW
The impact of sorting quality on the properties of recycled flexible plastic packagingClean Technologies and Environmental PolicyDOI: 10.1007/s10098-025-03403-6
KT
Comparative life cycle assessment of one-step and two-step injection molding compounding for manufacturing recycled glass fiber/polypropylene compositesJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2026.147916
WBW
Reducing the environmental footprint of cotton T-shirt production through automation and reshoring: a scenario-based comparative life cycle assessmentThe International Journal of Life Cycle AssessmentDOI: 10.1007/s11367-026-02630-3
RIW
Belt-Integrated Monitoring of Tensile Loads in Conveyor BeltsBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-026-01703-y
VTiU
Experimental dataset of the reverse water-gas shift reaction in a fixed-bed reactor setup under varying reactor conditionsData in BriefDOI: 10.1016/j.dib.2026.112485
KT
Integrating process replicability in the life cycle assessment of manufacturing fiber-reinforced polymer composites: LCA FOR MANUFACTURING AND NANOTECHNOLOGYThe International Journal of Life Cycle AssessmentDOI: 10.1007/s11367-026-02635-y
Publications 2025
AVAWKT
Progress towards composition-based inline sorting and recycling of multilayer polymer packagingSustainable Materials and TechnologiesDOI: 10.1016/j.susmat.2025.e01385
KT
A New Approach Using Multi-Layer Films from Food Waste as a Shrink FilmProcessesDOI: 10.3390/pr13020560
KT
Production of Anisotropic NdFeB Permanent Magnets with In Situ Magnetic Particle Alignment Using Powder Extrusion MaterialsDOI: 10.3390/ma18153668
AVAW
Comparative reactivity and microstructural characterization of mineral wastes in alkali activated bindersConstruction & building materials (Construction and building materials)DOI: 10.1016/j.conbuildmat.2025.143697
AVAWKT
Detection of degraded high-density polyethylene via near-infrared hyperspectral imagingWaste managementDOI: 10.1016/j.wasman.2025.114960
KT
Synthesis and characterization of thermolatent bases with varying activation temperaturesRSC AdvancesDOI: 10.1039/d5ra05095b
TPT
Measurements for refractory protection in pyrometallurgical recycling of lithium-ion batteriesResults in MaterialsTPT
Investigation of the Phosphide Formation for Transition Metals during Carbothermal Reduction of Industrial and Synthetic SlagsCircular economy and sustainabilityDOI: 10.1007/s43615-025-00549-9
KT
Computational Modeling of the Continuous Separation of a Molten Polymer Mixture in a Centrifugal FieldMacromolecular Theory and SimulationsDOI: 10.1002/mats.202400109
NEM
Bioleaching of Lithium-Ion Battery Black Mass: A Comparative Study on Gluconobacter oxydans and Acidithiobacillus thiooxidansMetals : open access journal DOI: 10.3390/met15101112
WW
Exceptional tolerance of austenitic stainless steels to tramp-impurity contaminationJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.09.255
AVAW
Lithium-Ionen Batterien: Grenzen und Herausforderungen bei der Berechnung der Recyclingeffizienz von Lithium-Ionen-Batterien im Rahmen der neuen Europäischen BatterieverordnungBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01589-2
AVAWTPT
Mineralwolle-Deponierungsverbot und aktuelle EntwicklungenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-025-01182-4
NEM
Hydrogen preserves microstructure to enhance steelmaking dust recyclingCommunications materialsDOI: 10.1038/s43246-025-00980-3
KTRIW
Data-driven prediction of mechanical properties in recycled fibre-reinforced polymer composites: Integrating machine learning with material–processing feature importance analysisJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.12.062
AVAWVTiU
From Waste to Product: New Circularity by Recovering Polypropylene from Mixed Commercial WasteRecyclingDOI: 10.3390/recycling10040128
ESM
Impact of selected tramp elements in medium carbon steels on the deformation behavior of non-metallic inclusions and phase transformationsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.03.150
WBW
Monetization of Life-Cycle based Environmental Impacts: A Case Study on External Environmental Costs of Steel-based Wear Parts for Biogas PlantsEnergy storage and saving (e-only)DOI: 10.1016/j.enss.2025.05.003
KT
Frontal polymerization of thiol-acrylate covalent adaptable networksPolymer ChemistryDOI: 10.1039/d4py01106f
AVAWVTiU
Forecasting the Shredder Output Volume Flow Towards Dynamic Control in Waste ManagementRecyclingDOI: 10.3390/recycling10030083
NEM
Impact of temperature and gas composition on hydrogen-based zinc recovery from electric arc furnace dustInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2025.04.366
AVAW
Technical Evaluation and Recycling Potential of Polyolefin and Paper Separation in Mixed Waste Material Recovery FacilitiesRecyclingDOI: 10.3390/recycling10050176
KT
How impurities affect the lifetime of plastic products - A circularity case study on polymer pipesPolymer TestingDOI: 10.1016/j.polymertesting.2025.108952
AVAW
Analysing material flows and final fate distribution of spent refractories from steel casting ladles and cement rotary kilns in EuropeResources, Conservation and RecyclingDOI: 10.1016/j.resconrec.2025.108158
AVAW
Federated continual learning for vision-based plastic classification in recyclingWaste managementDOI: 10.1016/j.wasman.2025.114976
TPT
Advancing the Circular Economy through Construction and Demolition Waste Management for Disaster Risk-Informed Practice: Comparative Insights from Serbia and the European UnionInternational Journal of Contemporary Security StudiesVTiU
Kinetic and Process Modeling of Guerbet Coupling Chemistry over Cu-Mg-Al Mixed OxidesEES CatalysisDOI: 10.1039/D5EY00045A
AVAW
Quantifying Cotton Content in Post-Consumer Polyester/Cotton Blend Textiles via NIR Spectroscopy: Current Attainable Outcomes and Challenges in PracticeRecyclingDOI: 10.3390/recycling10040152
KT
Process optimization to produce anisotropic NdFeB permanent magnets from recycled powder via powder extrusionScientific reportsDOI: 10.1038/s41598-025-19111-6
ESMTPT
Integrating pyro- and biohydrometallurgy in a green closed-loop lithium-ion battery recycling approachJournal of environmental chemical engineeringDOI: 10.1016/j.jece.2025.116811
KT
Development of a probe tack method for determining the surface tack of thin-walled rubber filmsJournal of Rubber ResearchDOI: 10.1007/s42464-025-00330-5
AVAW
Prototype of AI-powered assistance system for digitalisation of manual waste sortingWaste managementDOI: 10.1016/j.wasman.2025.01.027
TPT
Pre-treatment Strategies for Efficient Pyrometallurgical Recycling of Lithium-Ion Batteries within the InduRed ReactorBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01594-5
KT
Innovative approaches to hydrogen storage in vinyl aromatic polymersInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2025.06.182
KT
Influence of reprocessing on monopolymer blends of polyhydroxybutyrate (PHB)Polymer TestingDOI: 10.1016/j.polymertesting.2025.108857
TPT
Investigation of thermokinetics in carbo- and aluminothermic reduction of synthesized lithium iron phosphate black massJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2025.145357
AVAW
Effects of surface contamination on automated textile sorting using NIR-spectroscopyWaste managementDOI: 10.1016/j.wasman.2025.115227
NEM
Impurity-induced phase transformations in AlMgZn(Cu) crossover alloys: Pathways to enhance recycling content and processabilityJournal of manufacturing processesDOI: 10.1016/j.jmapro.2025.06.106
AVAW
Upgrading and Characterization of Glass Recovered from MSWI Bottom Ashes from Fluidized Bed CombustionRecyclingDOI: 10.3390/recycling10020063
NEM
Effects of composition, recycling and processing on deep drawing performance of automotive 6016 aluminium sheetsCIRP Journal of Manufacturing Science and TechnologyDOI: 10.1016/j.cirpj.2025.12.012
NEM
Processing of Used Aluminium Coffee Capsules as a Contribution to Closed-Loop RecyclingAspects in Mining & Mineral ScienceDOI: 10.31031/AMMS.2025.14.000838
AVAW
Materialcharakterisierung gebrauchter Feuerfeststeine als Schlüssel für das effektive Training von Sensoren: (Praxisbeispiele aus dem Projekt ReSoURCE)Berg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01577-6
CH
A post-ophiolitic plutonism record in the Central-East Iranian Microcontinent: Evidence for Pre-Eocene age of Neo-Tethys subductionJournal of African earth sciencesDOI: 10.1016/j.jafrearsci.2025.105628
AVAW
recAIcle: An Intelligent Assistance System for Manual Waste Sorting—Validation and ScalabilityRecyclingDOI: 10.3390/recycling10060221
RIW
From logs to layers: Framework for interpreting subsurface facies in Iceland geothermal reservoirsGeothermicsDOI: 10.1016/j.geothermics.2025.103474
ESM
Zn recovery from steel mill EAF dusts: A two-step biotechnological approachResources, Conservation and Recycling AdvancesDOI: 10.1016/j.rcradv.2025.200278
AVAW
Evaluation of mineral waste streams for alkali-activated materials: Reactivity and utilization potentialJournal of Building EngineeringDOI: 10.1016/j.jobe.2025.114705
CH
Evaluation of Six Phosphorus Extraction Methods for Compliance Testing of Recycled P Fertilizers Environmental technology & innovation (OA)DOI: 10.1016/j.eti.2024.103913
WW
A New Recycling Technology to Produce Premixed Thermal Insulating Mortars from Polyurethane Waste FoamsPolymersDOI: 10.3390/polym17162233
AVAWVTiU
Particle Size Distribution of Materials and Chemical Element Composition in Mixed Commercial WasteWasteDOI: 10.3390/waste3010009
CH
A possible volcanic origin for the Greenland ice core Pt anomaly near the Bølling-Allerød/Younger Dryas boundaryPLOS ONEDOI: 10.1371/journal.pone.0331811
Publications 2024
KT
Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of VulcanizatesPolymersDOI: 10.3390/polym16142033
AVAW
Determination and improvement of the quality of separately collected bio-waste from householdsWaste management & researchDOI: 10.1177/0734242X241259895
KT
Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis Journal of composites scienceDOI: 10.3390/jcs8040126
RIW
Kontamination von Haufwerk durch Sprengmittel und DieselmotoremissionenBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-024-01529-6
ESM
Influence of Tramp Elements on Surface Properties of Liquid Medium-Carbon SteelsSteel research internationalDOI: 10.1002/srin.202300715
KT
Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applicationsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.04.133
NEM
Overview on aluminium alloys as sinks for end-of-life vehicle scrapIOP Conference Series: Materials Science and EngineeringDOI: 10.1088/1757-899x/1315/1/012008
AVAW
Biodegradable plastics – Where to throw? A life cycle assessment of waste collection and management pathways in AustriaWaste managementDOI: 10.1016/j.wasman.2024.10.018
AVAWTPT
Recycling of Potential Hazardous Stone Wool into a Non-Hazardous New Stone WoolDetritusDOI: 10.31025/2611-4135/2024.18355
RIW
Physical and mechanical depth relationships of rocks from the Rotokawa Geothermal Reservoir, Taupō Volcanic Zone, New ZealandNew Zealand journal of geology and geophysicsDOI: 10.1080/00288306.2024.2424847
AVAW
Effect of Surface Contamination on Near-Infrared Spectra of Biodegradable PlasticsPolymersDOI: 10.3390/polym16162343
CH
Forearc magmatism in the Pannonian basin recorded by metasomatised skarnoid xenoliths in Pliocene basalt (Novohrad-Gemer Volcanic Field, Slovakia)LithosDOI: 10.1016/j.lithos.2024.107741
AVAW
Recovery of plastic packaging from mixed municipal solid waste. A case study from AustriaWaste managementDOI: 10.1016/j.wasman.2024.02.040
CH
Evaluation of X-ray fluorescence for analysing critical elements in three electronic waste matrices: A comprehensive comparison of analytical techniquesWaste managementDOI: 10.1016/j.wasman.2024.10.015
KT
Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical glovesJournal of applied polymer scienceDOI: 10.1002/app.55498
KT
Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate\textquoterights PropertiesJournal of polymers and the environmentDOI: 10.1007/s10924-024-03425-z
KT
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled PolypropyleneACS Sustainable Chemistry and EngineeringDOI: 10.1021/acssuschemeng.4c04645
CH
Fertilization efficiency of thirty marketed and experimental recycled phosphorus fertilizersJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2024.142957
KT
Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced compositesJournal of Reinforced Plastics and CompositesDOI: 10.1177/07316844241295848
KT
Design of Reversible Adhesives by Using a Triple Function of Ionic LiquidsMacromolecular materials and engineeringDOI: 10.1002/mame.202400011
TPT
Evaluating refractory material performance in pyrometallurgical recycling of lithium-ion batteries under a reducing atmosphereCeramics InternationalDOI: 10.1016/j.ceramint.2024.08.220
KT
Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniquesRadiation physics and chemistryDOI: 10.1016/j.radphyschem.2024.111846
CH
In-use dissipation of technology-critical elements from vehicles and renewable energy technologies in Vienna, Austria: A public health matter?Journal of industrial ecologyDOI: 10.1111/jiec.13571
AVAWTPT
Recycling of mineral wool waste as supplementary cementitious material through thermochemical treatmentWaste Management and ResearchDOI: 10.1177/0734242X241237199
AVAW
Kreislauforientierte Betrachtung zur Verbesserung der Kompostqualität aus biogenen Abfällen aus der HaushaltssammlungÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-024-01102-y
RIW
Integration von Technologien für mehr Transparenz in LieferkettenBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-024-01448-6
KT
Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion MouldingJournal of Manufacturing and Materials ProcessingDOI: 10.3390/jmmp8020081
AVAW
Deep learning approaches for classification of copper-containing metal scrap in recycling processesWaste managementDOI: 10.1016/j.wasman.2024.10.022
AVAWCH
Development and application of reference and routine analytical methods providing SI-traceable results for the determination of technology-critical elements in PCB from WEEEJournal of analytical atomic spectrometryDOI: 10.1039/d4ja00235k
KT
Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality predictionJournal of applied polymer scienceDOI: 10.1002/app.54901
AVAW
Critical properties of plastic packaging waste for recycling: A case study on non-beverage plastic bottles in an urban MSW system in AustriaWaste managementDOI: 10.1016/j.wasman.2024.05.035
KT
Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materialsJournal of Applied Polymer ScienceDOI: 10.1002/app.56074
NEM
Supply security beyond mines and scrap recycling: valorization potential of metallurgical residuesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering SciencesDOI: 10.1098/rsta.2023.0237
Publications 2023
KT
Computational modelling of the separation of molten polymer blends by a centrifugal techniqueJournal of polymer researchDOI: 10.1007/s10965-023-03682-x
RIW
Lithium und Cobalt – Chancen und Probleme in Bezug auf zwei kritische Rohstoffe in der EUBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01369-w
RIW
Citric Acid Leaching of Industrial BOF SlagsBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01341-8
NEM
Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigmResources, Conservation and RecyclingDOI: 10.1016/j.resconrec.2023.107370
ESM
Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction ProcessMetalsDOI: 10.3390/met13030558
RIW
Unravelling calcite-to-aragonite evolution from a subsurface fluid - Formation pathway, interfacial reactions and nucleation effectsChemical geologyDOI: 10.1016/j.chemgeo.2023.121768
NEM
Bio-metallurgical recovery of lithium, cobalt, and nickel from spent NMC lithium ion batteries: A comparative analysis of organic acid systems Journal of hazardous materials advancesDOI: 10.1016/j.hazadv.2023.100397
RIW
Characterizing lithological, weathering, and hydrothermal alteration influences on volcanic rock properties via spectroscopy and laboratory testing: a case study of Mount Ruapehu volcano, New ZealandBulletin of volcanologyDOI: 10.1007/s00445-023-01657-w
NEM
Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteriesHydrometallurgyDOI: 10.1016/j.hydromet.2023.106187
NEM
Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Friendly Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active MaterialMetals : open access journal DOI: 10.3390/met13081330
RIW
Porosity, strength, and alteration – Towards a new volcano stability assessment tool using VNIR-SWIR reflectance spectroscopyEarth and planetary science lettersDOI: 10.1016/j.epsl.2022.117929
KT
Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipesEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2023.109423
RIW
Sensorgestützte Sortierung: In der Rohstoffbranche werden die Karten neu gemischtBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01349-0
AVAW
Inline classification of polymer films using Machine learning methodsWaste managementDOI: 10.1016/j.wasman.2023.11.028
AVAW
Sortierung von Mehrschichtfolien durch Anwendung von Transflektion und Machine-Learning-AnsätzenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-023-01000-9
KT
Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding Journal of composites scienceDOI: 10.3390/jcs7030122
AVAW
Automatisierte Textilsortierung – Status quo, Herausforderungen und PerspektivenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-023-01004-5
AVAW
COMET Module FuLIBatteR – Auf der Suche nach der besten Lösung für das Recycling von Lithium-Ionen-Batterien der ZukunftBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01368-x
CH
How to verify the precision of density-functional-theory implementations via reproducible and universal workflowsNature Reviews Physics DOI: 10.1038/s42254-023-00655-3
AVAW
Einflüsse von Kreislaufwirtschaftsmaßnahmen auf Ressourcennutzung und Dekarbonisierung in der Stahl- und ZementindustrieBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01366-z
RIW
Bergbaukunde, quo vadis?Berg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01322-x
KT
Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and PolypropylenePolymersDOI: 10.3390/polym15204126
AVAW
Determining the recycled content in cement: A study of Austrian cement plantsResources, Conservation and RecyclingDOI: 10.1016/j.resconrec.2023.107276
AVAW
Digitalisierung der Handsortierung durch Künstliche Intelligenz, Machine Learning und Human Machine InteractionÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-023-01002-7
NEM
Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behavior of NMC-Based Black MassMetals : open access journal DOI: 10.3390/met13040785
KT
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios WSEAS transactions on environment and developmentDOI: 10.37394/232015.2023.19.117
Publications 2022
RIW
Formsteine – Eine technische Lösung, um kupferhaltige Rest- und Kreislaufstoffe ofengängig zu machenBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01262-y
KT
Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristicsAdditive ManufacturingDOI: 10.1016/j.addma.2022.102987
KT
Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardantsPolymer Degradation and StabilityDOI: 10.1016/j.polymdegradstab.2021.109783
RIW
Hydrothermally induced edifice destabilisation: The mechanical behaviour of rock mass surrounding a shallow intrusion in andesitic lavas, Pinnacle Ridge, Ruapehu, New ZealandEngineering GeologyDOI: 10.1016/j.enggeo.2022.106696
GK
Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)Journal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.164446
NEM
A Sustainable Approach for the Recovery of Manganese from Spent Lithium-Ion Batteries via Photocatalytic OxidationInternational Journal of Materials Science and ApplicationsNEM
Selective Chlorination and Extraction of Valuable Metals from Iron Precipitation ResiduesApplied Sciences : open access journalDOI: 10.3390/app12073590
GK
Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloysJournal of materials scienceDOI: 10.1007/s10853-022-07045-7
RIW
Verantwortungsvolle Beschaffung im Bereich der erneuerbaren Energien - Realität oder noch ein weiter Weg?Berg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01209-3
RIW
Sustainable Consumption and Production in the Extraction and Processing of Raw Materials—Measures Sets for Achieving SDG Target 12.2SustainabilityDOI: 10.3390/su141710971
RIWTPT
A Combined Hydro-Mechanical and Pyrometallurgical Recycling Approach to Recover Valuable Metals from Lithium-Ion Batteries Avoiding Lithium SlaggingBatteriesDOI: 10.3390/batteries9010015
AVAW
Selective delamination by milling as a first step in the recycling of photovoltaic modulesEnvironmental technologyDOI: 10.1080/09593330.2022.2061380
TPT
Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFPMetalsDOI: 10.3390/met12101642
ESM
Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges RecyclingÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-022-00903-3
RIW
Tunnelausbruchverwertung am FCC - Future Circular Collider in CERNBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01299-z
AVAWRIW
Lifecycle Assessment for Recycling Processes of Monolayer and Multilayer Films: A ComparisonPolymersDOI: 10.3390/polym14173620
NEM
Critical Evaluation of the Potential of Organic Acids for the Environmentally Friendly Recycling of Spent Lithium-Ion BatteriesRecyclingDOI: 10.3390/recycling7010004
CH
Determination of Re, Os, Ir, Ru, Pt, Pd Mass Fractions and Os-187/Os-188 Ratios of Organic-Rich Geological Reference MaterialsGeostandards and Geoanalytical ResearchDOI: 10.1111/ggr.12423
AVAW
Influence of reflective materials, emitter intensity and foil thickness on the variability of near-infrared spectra of 2D plastic packaging materialsWaste managementDOI: 10.1016/j.wasman.2021.12.019
KT
Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical propertiesAdditive ManufacturingDOI: 10.1016/j.addma.2021.102518
AVAW
Thermal delamination of end-of-life crystalline silicon photovoltaic modulesWaste management & researchDOI: 10.1177/0734242X211038184
VTiU
Phosphate Fixation and P Mineralogy on Natural and Ca-Modified Zeolites During Simultaneous Nutrient RemovalWater, air, and soil pollutionDOI: 10.1007/s11270-022-05509-9
ESM
Hydrogen plasma smelting reduction process monitoring with optical emission spectroscopy – Establishing the basis for the methodJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2022.133755
NEM
Influence of Different Carbon Content on Reduction of Zinc Oxide via Metal BathApplied Sciences : open access journalDOI: 10.3390/app12020664
TPT
Influence of Impurities on the High-Temperature Behavior of the Lithium-Ion Battery Cathode Material NMC Under Reducing Conditions for Use in the INDURED Reactor ConceptDetritusDOI: 10.31025/2611-4135/2022.15215
ESM
How to increase scrap recyclingSteel times internationalAVAW
Latent Recycling Potential of Multilayer Films in Austrian Waste ManagementPolymersDOI: 10.3390/polym14081553
AVAW
„ReWaste4.0“ – Abfallwirtschaftliches Kompetenzzentrum am AVAW der Montanuniversität LeobenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-021-00814-9
Publications 2021
AVAWWBW
Challenges to Increase Plastic Sorting EfficiencyInternational Journal on Engineering Technologies and InformaticsDOI: 10.51626/ijeti.2021.02.00023
AVAW
Assessment of Technological Developments in Data Analytics for Sensor-Based and Robot Sorting Plants Based on Maturity Levels to Improve Austrian Waste Sorting PlantsSustainabilityDOI: 10.3390/su13169472
RIW
Calculating the cohesion and internal friction angle of volcanic rocks and rock massesVolcanicaDOI: 10.30909/vol.04.02.279293
RIW
Nachhaltige Entwicklungsziele – Der Beitrag der Montanuniversität zur Erstellung eines Optionenpapiers für die österreichische BundesregierungBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01156-5
NEM
Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic ModelMetallurgical and materials transactions. B, Process metallurgy and materials processing scienceDOI: 10.1007/s11663-020-02047-9
NEM
Separation and Efficient Recovery of Lithium from Spent Lithium-Ion BatteriesMetals : open access journal DOI: 10.3390/met11071091
RIW
Determining physical and mechanical volcanic rock properties via reflectance spectroscopyJournal of volcanology and geothermal researchDOI: 10.1016/j.jvolgeores.2021.107393
RIW
Sieben Jahre EIT RawMaterials Regional Center in Leoben – Rohstoffforschung im Kontext Globaler EntwicklungBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01163-6
AVAW
Die sieben Kerneinflussfaktoren auf die Weiterentwicklung von Produktionsanlagen im SchrottrecyclingBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01094-2
TPT
Pyrometallurgical Lithium-Ion-Battery Recycling: Approach to Limiting Lithium Slagging with the InduRed Reactor ConceptProcesses : open access journalDOI: 10.3390/pr9010084
AVAWVTiU
Wet-mechanical processing of a plastic-rich two-dimensional-fraction from mixed wastes for chemical recyclingWaste Management & Research: The Journal for a Sustainable Circular EconomyDOI: 10.1177/0734242X21996435
AVAWKT
Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for RecyclingPolymersDOI: 10.3390/polym13030457
CHNEM
Studies on the Formation and Processing of Aluminium Dross with Particular Focus on Special MetalsMetalsDOI: 10.3390/met11071108
TPT
A Novel Pyrometallurgical Recycling Process for Lithium-IonBatteries and Its Application to the Recycling of LCO and LFPMetals : open access journal DOI: 10.3390/met11010149
RIW
Alteration-Induced Volcano Instability at La Soufriere de Guadeloupe (Eastern Caribbean)Journal of geophysical researchDOI: 10.1029/2021JB022514
KT
Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysisPolymer TestingDOI: 10.1016/j.polymertesting.2021.107406
RIW
Challenges of Tunnelling in Volcanic Rock MassesBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01175-2
AVAW
The EU Training Network for Resource Recovery through Enhanced Landfill Mining—A ReviewProcesses : open access journalDOI: 10.3390/pr9020394
VTiU
Advancing Plastic Recycling by Wet-Mechanical Processing of Mixed Waste FractionsProcesses : open access journalDOI: 10.3390/pr9030493
KT
Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing KineticsPolymersDOI: 10.3390/polym13030380
VTiU
Weiterentwicklung einer nass-mechanischen Aufbereitungsanlage zur Gewinnung von hochreinen Polyolefinkonzentraten für ein chemisches und mechanisches RecyclingÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-021-00812-x
AVAW
Employement effects of different municipal waste treatment systems based on data from AustriaDetritusDOI: 10.31025/2611-4135/2021.15090
NEM
Potenzialabschätzung von Synergieeffekten zur simultanen Rückgewinnung von Wertmetallen aus komplexen, metallhaltigen ReststoffenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-021-00822-9
TPT
Recycling von Lithium-Ionen-Batterien: Herausforderungenund aktuelle ForschungsergebnisseBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01091-5
NEM
MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum RecyclingBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01119-w
AVAW
Über theoretische und reale RecyclingfähigkeitÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-020-00721-5
AVAWNEMTPT
Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependenciesWaste managementDOI: 10.1016/j.wasman.2021.11.038
AVAW
Recycling von MultilayerfolienÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-021-00813-w
KT
Suitability of Recycled PLA Filament Application in Fused Filament Fabrication ProcessTechnical journal : scientific professional journal of University North DOI: 10.31803/tg-20210805120621
TPT
Thermal analysis of lithium ion battery cathode materials for the development of a novel pyrometallurgical recycling approachCarbon Resources ConversionDOI: 10.1016/j.crcon.2021.04.005
AVAW
Lithium-Ionen-Batterien – Kreislaufwirtschaftliche Herausforderungen am Ende des Lebenszyklus und im RecyclingBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01087-1