Alle Einträge ohne DOI-Link sind mithilfe des Titels im Pure-Portal zu finden.
Publications 2026
Processes
From Crisis to Growth: Pre-Disaster Planning as a Catalyst for Sustainable Innovation and Circular Economy in European CitiesREAL CORP 2026Materials
Interfacial adhesion of polymeric components in a steel façade integrated PV moduleDOI: 10.34901/mul.pub.2026.115
Processes
Comparative techno-economic assessment of CO2-based SAF pathways: Fischer-Tropsch, methanol-to-jet and ethanol-to-jet across three global regions: EU, USA and Middle EastFuelDOI: 10.1016/j.fuel.2026.139021
Processes
Evaluating the environmental impacts and economic competitiveness of the Fischer-Tropsch, HEFA and Methanol-to-Jet routeDOI: 10.34901/mul.pub.2026.094
Processes
From LCA to Action: A Decision Framework for Improving Environmental Performance in Special-Purpose VehiclesMaterials
Influence of temperature on polytype stability of silicon carbide with dopants: A first-principles investigationCrystal growth & designDOI: 10.1021/acs.cgd.5c01779
Processes
A Decision Support-Tool for LCA-based Environmental Performance Improvement of Special Purpose VehiclesMaterials
Influence of boron grain boundary segregation on the results of thermodynamic calculations in the Fe-C-B-N systemCalphadDOI: 10.1016/j.calphad.2026.102943
Materials
In situ and locally resolved analysis of retained austenite stability during tensile loading in a high-strength weld metalJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2026.03.159
Processes
Pyrolysis behavior comparison of wood samples using simultaneous thermal analysis and evolving gas analysisMaterials
Formation, quantification and morphology of retained austenite in the heat-affected zone of a high-strength steelScience and Technology of Welding and JoiningDOI: 10.1177/13621718261421674
Processes
Operationalizing the Resilience of Local Communities to Flood Risk: A Capital Approach and Assessment ModelFourth Memorial Scientific and Professional Conference - Modern Integrated Disaster Risk Management , BelgradeDOI: 10.5281/ZENODO.19339128
Processes
A System Readiness Assessment Of LCA Applications Within The Novel Framework Of Green Digital TwinsProceedings of the Conference on Production Systems and LogisticsProcesses
A thermo-hydro-chemo-mechanical coupled model for hydrate reservoirs using OpenGeoSys: model development and simulation of the first offshore hydrate production test in the South China SeaEnergyDOI: 10.1016/j.energy.2026.140198
Processes
Introducing a Next-Generation Tool for Asphaltene Precipitation Modeling for Improved Reservoir Simulation and Production Flow AssuranceSociety of Petroleum Engineers (SPE)DOI: 10.2118/231401-MS
Processes
Erneuerbare Energiegemeinschaften: Eine Empirische Erhebung zum Status Quo in ÖsterreichKurzfassungsband 19. Symposium Energieinnovation 2026 (EnInnov2026)Materials
Quantitative estimation of nanoparticle/substrate adhesion by atomic force microscopyBeilstein journal of nanotechnology (Online-Ressource)DOI: 10.3762/bjnano.17.1
Systems
Investment Optimization and Risk Assessment for District Heating Decarbonization Pathways for a Case StudyDOI: 10.34901/mul.pub.2026.107
Materials
Microstructure and mechanical properties of CVD TiN/TiB2 multilayer coatingsCoatingsDOI: 10.3390/coatings16040394
Systems
The Role of Industrial Excess Heat for the Transformation of the Energy SystemBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-026-01702-z
Systems
Energieeffizientes Recycling von Stahlwerkstäuben durch AbwärmenutzungDOI: 10.34901/mul.pub.2026.108
Materials
Precipitation and phase evolution in a Cu-modified near-α titanium alloy designed for additive manufacturingActa materialiaDOI: 10.1016/j.actamat.2026.121901
Materials
Atmospheric water and graphite lubrication: Insights into surface intercalation and nanoscale confined spacesPhysical review materials DOI: 10.1103/5z9j-qrhh
Systems
Optimized production scheduling: a case study on food and steel industriesEnergy, Sustainability and SocietyDOI: 10.1186/s13705-026-00570-2
Materials
Unraveling the effect of tramp elements on phase transformations in steels by combining CALPHAD modeling and experiments Advanced engineering materialsDOI: 10.1002/adem.202502943
Materials
Bindemittelersatzstoffe für PTFE im Bereich der Trockenfilmherstellung von BatterieerzeugnissenProcesses
Cuttings vs cores: are cuttings a reliable predictor of caprock porosity? Geoenergy science and engineeringDOI: 10.1016/j.geoen.2025.214180
Processes
Experimentelle Untersuchung der CO2-Abtrennung mittels einer elektrochemischen DurchflusszelleProcesses
Lithiumabscheidung aus Prozessabwässern mit Hilfe von natürlichen und synthetischen ZeolithenDOI: 10.34901/mul.pub.2026.120
Processes
Assessment of biomass-to-syngas process routes involving pyrolysis/gasification reactions coupled with a liquid metal bath reactorChemical Engineering JournalDOI: 10.1016/j.cej.2026.175385
Materials
First-principles study of Ti-decorated graphene-based single-atom catalyst for MgH2 dehydrogenationInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2026.153379
Processes
Evaluating the potential of synthetic natural gas production from cement plant off-gas in Austria: A sectoral comparison with biogenic CO2Energy Conversion and ManagementDOI: 10.1016/j.enconman.2026.121343
Processes
Analysis of axial dispersion models for methane pyrolysis in bubble column reactors: From aqueous to liquid metal mediaDOI: 10.34901/mul.pub.2026.090
Processes
Reducing the environmental footprint of cotton T-shirt production through automation and reshoring: a scenario-based comparative life cycle assessmentThe International Journal of Life Cycle AssessmentDOI: 10.1007/s11367-026-02630-3
Materials
Plasma wire arc additive manufacturing ( PWAAM ) of high-strength steel on a high-carbon steel, consideration and characterization of the transition areaMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.149543
Materials
From Copper Nanoparticles to Alumina Encapsulated Porous Layers With Enhanced Mechanical StabilityAdvanced Materials InterfacesDOI: 10.1002/admi.202501037
Materials
The potential of carbon from methane plasmalysis as a soil amendmentJournal of environmental managementDOI: 10.1016/j.jenvman.2025.128388
Materials
Efficient thermal field optimization of PVT simulations for SiC single crystal growthJournal of crystal growthDOI: 10.1016/j.jcrysgro.2026.128490
Systems
Determination of the industrial excess heat potential of selected industrial companies in AustriaDOI: 10.34901/mul.pub.2026.109
Publications 2025
Materials
Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument studyUltramicroscopyDOI: 10.1016/j.ultramic.2025.114105
Processes
Machine learning approaches for groundwater temperature prediction in Austria: Impacts of hydro-climatic variability, feature engineering, and model complexityJournal of hydrology : Regional StudiesDOI: 10.1016/j.ejrh.2025.102987
Materials
Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different ClimatesIEEE Journal of PhotovoltaicsDOI: 10.1109/JPHOTOV.2024.3523546
Systems
Techno-ökonomische Analyse erneuerbarer Wärmeerzeugungsprojekte im Großraum Graz im Vergleich zum Heat Highway SteiermarkDOI: 10.34901/mul.pub.2025.145
Materials
Additive manufacturing of a crack-free tool steel with high C and Cr contents: Microstructure and mechanical propertiesMaterials characterizationDOI: 10.1016/j.matchar.2025.114919
Systems
Supra-Regional District Heating Networks: Harnessing Industrial Waste Heat for a Low-Carbon Heat FutureDOI: 10.34901/mul.pub.2025.233
Materials
Eco-friendly additives for biodegradable polyesters: Recent progress in performance optimization and environmental impact reductionSustainable Materials and TechnologiesDOI: 10.1016/j.susmat.2025.e01395
Processes
Measurements for refractory protection in pyrometallurgical recycling of lithium-ion batteriesResults in MaterialsMaterials
Phase-separated Zr70-xAl12.5Fe17.5Yx (x = 0–25 at.%) metallic glasses with suitable mechanical properties for possible implant applicationsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.02.252
Materials
A universal ML model for segregation in WComputational materials scienceDOI: 10.1016/j.commatsci.2025.113847
Materials
Advanced nanoindentation testing: Beyond the Oliver–Pharr methodMRS BulletinDOI: 10.1557/s43577-025-00921-y
Materials
Tracking changes in segregation on a single grain boundary in a ferritic steel by repeated atom probe tomographyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.08.260
Materials
Towards a Safe and Large-scale Solution for Balancing Renewable Energy Supply and DemandBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01673-7
ProcessesSystems
Forecasting of Wind Speed and Power for Poland Using Prominent Variants of FFNN Tuned Through MHPSO-BAAC-xActa Montanistica SlovacaDOI: 10.46544/AMS.v30i2.14
Materials
Interstitials as a key ingredient for P segregation to grain boundaries in polycrystalline α-FeScripta materialiaDOI: 10.1016/j.scriptamat.2025.116864
Materials
Inversion of dislocation-impurity interactions in α-Fe under magnetic state changesScripta materialiaDOI: 10.1016/j.scriptamat.2025.116766
Systems
Möglichkeiten zur Identifikation und Vermarktung von Energieflexibilität in der IndustrieDOI: 10.34901/mul.pub.2025.203
Materials
Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomographySmall MethodsDOI: 10.1002/smtd.202401650
Systems
Comparative Analysis of Load Profile Forecasting: LSTM, SVR, and Ensemble Approaches for Singular and Cumulative Load CategoriesSmart CitiesDOI: 10.3390/smartcities8020065
Processes
Investigation of the Correlation Between Initial Parameters and Success Factors in Completed Investment and Industrial Plant Construction ProjectsProcesses
Life Cycle Assessment of a CCU process: CO2 Capture and Mineralisation by SerpentineDOI: 10.34901/mul.pub.2025.127
Materials
Achieving Complex Nanostructures: The Role of Hydrogen in Controlling Mechanical Alloying and Microstructure Evolution in the TiVZrNbHf-Cu SystemAdvanced scienceDOI: 10.1002/advs.202507168
Materials
The effect of liquid organic hydrogen carrier on the physico-mechanical and rheological properties of injection-molded high-density polyethylene and polyketoneResults in EngineeringDOI: 10.1016/j.rineng.2025.103918
Materials
Precipitation and growth behavior of β0 phase in the α2/γ lamellar colonies of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.179381
Processes
Comparative Analysis of Disclosure Requirements of ESRS E and ISO 14001: Developing Measures to Bridge the GapsDOI: 10.34901/mul.pub.2025.146
MaterialsProcesses
Hybrid chemisorption−physisorption of subcritical CO2 on coals: Implications for Safe and Long-Term Underground CO2 SequestrationEnergy & fuelsDOI: 10.1021/acs.energyfuels.5c02015
Materials
Prediction and identification of point defect fingerprints in X-ray photoelectron spectra of TiN x with 1.18 ≤ ≤ 1.37Materials and DesignDOI: 10.1016/j.matdes.2025.114752
Materials
Enhanced dehydrogenation and regeneration behavior of LiBH4–LiAlH4–MgCl2 in nanoporous carbonsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2025.01.377
Systems
Economic feasibility of supra-regional district heating networks: Addressing technical and economic considerationsEnergyDOI: 10.1016/j.energy.2025.136190
Materials
Hydrogen decelerates fatigue induced grain boundary migration in nanostructured ironActa materialiaDOI: 10.1016/j.actamat.2025.120749
Processes
Investigating the Impact of Seasonal Heat Storage on the Thermal and Economic Performance of a Deep Borehole Heat Exchanger: A Numerical Simulation StudyBuildingsDOI: 10.3390/buildings15091575
Materials
Interfacial segregation of carbon atoms: the competition between grain boundaries and phase boundariesScripta materialiaDOI: 10.1016/j.scriptamat.2025.116842
Processes
Heat extraction performance and formation cooling effect of borehole heat exchangers in high-temperature coal minesFrontiers in built environmentDOI: 10.3389/fbuil.2025.1575878
Processes
Mineralwolle-Deponierungsverbot und aktuelle EntwicklungenÖsterreichische Wasser- und Abfallwirtschaft : ÖWAW DOI: 10.1007/s00506-025-01182-4
Processes
On the Interpretation of Unsteady State Experiments in Heterogeneous Rock by Stochastic MethodsInterPore journalDOI: 10.69631/ipj.v2i2nr44
Processes
Sensitivity analysis of the methanation process in underground hydrogen storage: A case study in Upper AustriaInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2025.01.381
Processes
Simultaneous nutrient removal and selective recovery of nitrogen and phosphorus from municipal wastewater: A novel combined ion exchange–surface precipitation process from proof of concept to pilot scaleJournal of environmental chemical engineeringDOI: 10.1016/j.jece.2025.117408
Processes
Monetization of Life-Cycle based Environmental Impacts: A Case Study on External Environmental Costs of Steel-based Wear Parts for Biogas PlantsEnergy storage and saving (e-only)DOI: 10.1016/j.enss.2025.05.003
MaterialsProcesses
CO2 utilization and sequestration potential in deep coal seams: A case study on Carboniferous coals from the Karaganda Basin, Kazakhstan Journal of CO2 utilizationDOI: 10.1016/j.jcou.2025.103204
Materials
Umgebungsbedingtes unterkritisches Risswachstum in kaltgesinterten ZnO KeramikenDOI: 10.34901/mul.pub.2026.048
Processes
Influence of the material and hydrogen injection point on the efficiency of the hydrogen plasma smelting reduction processDOI: 10.34901/mul.pub.2026.012
Processes
Environmental Assessment of Special Purpose Vehicles: An EPD-compliant empirical studyDOI: 10.34901/mul.pub.2026.058
Processes
Neue Materialien für Energieumwandlung und -speicherung: Aktuelle Forschung am Lehrstuhl für Physikalische ChemieBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01573-w
Materials
Metastable AlB2 structured TM-Si-B2±z (TM = Ti, Zr, Hf) solid solutions from first-principlesActa materialiaDOI: 10.1016/j.actamat.2025.120857
Systems
Enhanced PV Power Forecasting through Deep Learning: Integrating Meteorological Data with Simulated System Performance and Real Data ValidationDOI: 10.34901/mul.pub.2025.156
Materials
Strain rate and temperature dependent viscoplasticity of sintered Cu nanoparticlesMaterials and DesignDOI: 10.1016/j.matdes.2025.114319
Processes
Assessment of Red Mud Recycling using Hydrogen Plasma Smelting ReductionMaterials
Retained austenite in multipass high-strength weld metal with a yield strength exceeding 1100 MpaJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.04.279
Processes
Entwicklung einer Methodik für die Berechnung eines Nachhaltigkeitsindex für UnternehmenDOI: 10.34901/mul.pub.2026.020
Materials
Comparison of semi-empirical models, symbolic regression, and machine learning approaches for prediction of tensile strength in steelsInternational journal of engineering scienceDOI: 10.1016/j.ijengsci.2025.104247
Materials
Instance segmentation pipeline for etch pit detection and prismatic slip characterization on silicon carbide substratesEngineering Applications of Artificial IntelligenceDOI: 10.1016/j.engappai.2025.111881
Processes
Techno-Economic Assessment of Aquifer and Pit Thermal Energy Storage (ATES and PTES)DOI: 10.34901/mul.pub.2025.198
Processes
Assessment of measures to reduce corporate carbon emissions along the production and energy processesOrganisation und Dynamik von Energiemärkten und Investitionen in InfrastrukturenDOI: 10.2139/ssrn.5637490
Processes
Evaluation of European Critical Raw Material Assessments under Energy Transition Considerations: Applications and ProspectsCircular economy and sustainabilityDOI: 10.1007/s43615-024-00493-0
Processes
Multidisciplinary development of a novel pyrometallurgical recycling approach for lithium-ion batteriesDOI: 10.34901/mul.pub.2025.175
Processes
Experimentelle Untersuchung des Niedertemperatur-Reoxidationsverhaltens von DRI CDOI: 10.34901/mul.pub.2026.018
Processes
Caprock integrity: A critical factor for carbon capture and storage in the Vienna BasinInternational Journal of Greenhouse Gas ControlDOI: 10.1016/j.ijggc.2025.104434
Materials
Advancing small-angle X-ray scattering for complex metallic systems: Ti 2 Cu precipitation in a martensitic near- a Ti alloyJournal of applied crystallographyDOI: 10.1107/S1600576725008489
MaterialsSystems
Analyse, Design und Aufbau einer resonanten Dual Active Bridge für kompakte HilfsspannungsversorgungsanwendungenDOI: 10.34901/mul.pub.2026.023
Materials
Nachhaltige Nutzung von Aushubmaterialien des Tief- & Tunnelbaus mithilfe sensorgestützter Technologien14. WISSENSCHAFTSKONGRESSMaterials
Assessed uncertainty in the Ti-W phase diagram combining experimental and ab-initio dataCalphadDOI: 10.1016/j.calphad.2025.102872
Processes
SAFE—Fit for the Future: a Transdisciplinary Living LabBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01570-z
Processes
A Cross-National Study of Disaster Risk Management: Strengths and Weaknesses in Bulgaria, Romania, and Albania with Reflections on SerbiaInternational journal of disaster risk managementDOI: 10.18485/ijdrm.2025.7.1.25
Processes
Comprehensive characterization of rock salt from the Haselgebirge Formation: Insights for cavern storage of hydrogenThe Mechanical Behavior of Salt XIDOI: 10.34901/mul.pub.2025.196
Materials
Toughening nitride hard coatings by deflecting cracks along grain boundariesMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.148392
Materials
Phase transformations and metastable states in a Cu-20 m.% Sn alloy: An integrated HEXRD, TEM, and APT investigationJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2025.180399
Processes
Ressourceneffiziente Optimierung der Produktionskapazitäten eines Blockwalzwerkes durch Implementierung einer VorwärmstrategieMaterials
Microstructure and deformation behavior of the wire-arc directed energy deposited high-performance near-β Ti-10V-2Fe-3Al alloyMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2025.148825
Processes
Digital Platform for Ecological Education of Students – Advancing the United Nations Sustainable Development Goals and the European Green Deal: The Case of ProSafeNet (Global Hub)International journal of disaster risk managementDOI: https://internationaljournalofdisasterriskmanagement.com/index.php/Vol1/article/view/181
MaterialsSystems
Die Zukunft der Windenergie: Ausbauproblematik, gesellschaftlicher Widerstand und technologische Lösungen für Onshore-WindkraftDOI: 10.34901/mul.pub.2026.027
Materials
Radiation‐Resistant Aluminum Alloy for Space Missions in the Extreme Environment of the Solar SystemAdvanced materialsDOI: 10.1002/adma.202513450
Processes
Integrating pyro- and biohydrometallurgy in a green closed-loop lithium-ion battery recycling approachJournal of environmental chemical engineeringDOI: 10.1016/j.jece.2025.116811
Materials
CFD simulation validation for tunnel ventilation: A case study from Zentrum am BergSystems
Accelerating European HVDC interconnector deployment: innovative financing mechanisms and regulatory pathwaysElektrotechnik und InformationstechnikDOI: 10.1007/s00502-025-01380-8
Materials
Transforming breakfast bio-waste into hydrogen storage materialsInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2025.03.002
Processes
Electrochemical performance and advanced 3D reconstruction of LSCF-GDC air electrodes for solid oxide electrolysis cellsJournal of power sourcesDOI: 10.1016/j.jpowsour.2025.238174
Materials
Metastability matters: Exploring hardness and conductivity in bell bronze alloysMaterials and DesignDOI: 10.1016/j.matdes.2025.114791
Systems
Analyse und Identifikation von Einsparungspotenzialen eines thermochemischen Prozesses zur Aufbereitung von SekundärrohstoffenDOI: 10.34901/mul.pub.2025.098
Processes
Pre-treatment Strategies for Efficient Pyrometallurgical Recycling of Lithium-Ion Batteries within the InduRed ReactorBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01594-5
Materials
HEATROCK—Cavern Thermal Energy Storage in Crystalline RocksBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01650-0
Processes
Heat extraction performance and techno-economic analysis of a deep U-type borehole heat exchanger under intermittent operationGeothermicsDOI: 10.1016/j.geothermics.2025.103307
Materials
Ab-initio grain boundary thermodynamics beyond the dilute limitActa materialiaDOI: 10.1016/j.actamat.2025.120725
Materials
High resolution characterization of pearlitic steels with increased copper contentDOI: 10.34901/mul.pub.2026.055
Materials
Decomposition and segregation phenomena in PVD TiBN coatingsMaterials and DesignDOI: 10.1016/j.matdes.2025.114912
Systems
Combining grid friendliness with economical goals: optimal battery storage operation under different end-user electricity and feed-in tariffsElektrotechnik und Informationstechnik : e & iDOI: 10.1007/s00502-025-01374-6
Materials
Determination of technology-critical elements in urban plants and water using inductively coupled plasma tandem mass spectrometryMaterials
Highly nanotwinned transition metal nitride film enabled by negative stacking fault energyActa materialiaDOI: 10.1016/j.actamat.2025.121475
MaterialsSystems
Optimization potential of no-load energy consumption in low-wattage wireless chargersProcesses
Fokus Methanpyrolyse – Sektorübergreifende Transformation mit emissionsarmem Wasserstoff und Klimawandelanpassung mit festem KohlenstoffBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-025-01582-9
Processes
Direct Aqueous Carbonation of Primary and Secondary Raw MaterialsDOI: 10.34901/mul.pub.2025.186
Materials
In situ characterization of phase and microstructural evolution during multi-step heat treatment of an additively manufactured tool steelJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.06.115
Processes
Investigation of thermokinetics in carbo- and aluminothermic reduction of synthesized lithium iron phosphate black massJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2025.145357
Processes
Theoretical Evolution of Measuring Community Resilience to Natural and Technological Disasters: Past, Present, and Future -Empirical Insights from Qualitative Research in SerbiaResearch Square PreprintDOI: 10.21203/rs.3.rs-8215077/v1
Materials
The relation of microstructural features to the fatigue crack growth and fracture behavior of a high-speed steelMaterials and DesignDOI: 10.1016/j.matdes.2025.114971
Materials
Hydrogen permeation into duplex steel under compressive and tensile stresses: Symmetric lattice swelling and asymmetric stress redistributionCorrosion scienceDOI: 10.1016/j.corsci.2025.113282
Materials
A Comprehensive Methodological Approach Towards the Micromechanical Characterization of Lead-Free Solder JointsJOMDOI: 10.1007/s11837-025-07289-z
Processes
Investigation of the reverse-water-gas-shift reaction on a nickel-based catalystDOI: 10.34901/mul.pub.2026.010
Materials
Degradation and Decay of Rocks: Linking Wetting–Drying and Slake Durability Tests for Climate-Sensitive MaintenanceGeotechnicsDOI: 10.3390/geotechnics5040084
Materials
Ab initio modeling of TWIP and TRIP effects in β‑Ti alloysJournal of materials research (JMR)DOI: 10.1557/s43578-025-01657-w
Materials
Multilayer design of sustainable multifunctional Zr–Cu–N coatings: A route for enhanced mechanical and antibacterial performanceMaterials and DesignDOI: 10.1016/j.matdes.2025.114037
Processes
Sistem te laže: Grassroots Memory and the Heritage of Protest in Serbia\textquoterights Lithium ConflictProcesses
Selectivity and coking behaviour of rWGS catalysts at industrially relevant conditionsSystems
Climate Neutrality Strategies for the Chemical Industry Using a Novel Carbon Boundary: An Austrian Case StudyEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en18061421
Processes
Development of automated software for analysis and simulation of the reverse water-gas-shift reactionDOI: 10.34901/mul.pub.2025.108
Materials
Crack arrest in nanoceramic multilayers via precipitation-controlled sublayer designMaterials and DesignDOI: 10.1016/j.matdes.2025.114159
Processes
Development of an Open-Source Tool for Feasibility Assessment of Thermal Energy Storage (FATES)DOI: 10.34901/mul.pub.2025.096
Systems
Unlocking heat pump flexibility: A multi-objective optimisation approach for self sufficiency and energy costsEnergy Conversion and ManagementDOI: 10.1016/j.enconman.2025.119822
Systems
Locating and dispatching flexibility in spatially resolved energy system models: a case study of AustriaElektrotechnik und Informationstechnik : e & iDOI: 10.1007/s00502-025-01344-y
Processes
Treatment of Recycled Metallurgical By-Products for the Recovery of Fe and Zn Through a Plasma Reactor and RecoDustMetalsDOI: 10.3390/met15080867
Materials
Ultrahigh surface area nanoporous carbon for air and water purification: Pushing the boundaries and unveiling the key physicochemical featuresChemical Engineering JournalDOI: 10.1016/j.cej.2025.169457
Processes
Enhanced Temperature Prediction in Ladle Furnace Steel Refining: Hybrid Process Modeling Based on Computational Thermodynamics and Statistical Learning MethodsMetallurgical and materials transactions. B, Process metallurgy and materials processing scienceDOI: 10.1007/s11663-025-03715-4
Materials
Wire-Arc directed energy deposition of metastable-β alloy Ti-15 V-3Cr-3Sn-3Al using thick wire feedstock: Microstructure and mechanical responseMaterials and DesignDOI: 10.1016/j.matdes.2025.114757
Systems
Fueling Industrial Flexibility: Discrete-Time Dispatch Optimization of Electric Arc FurnacesEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en18184838
Materials
Alteration of Phase Transformation Behavior and Prior Austenite Grain Structure Due to Elevated Tramp Element Concentrations in a Hypoeutectoid SteelSteel research internationalDOI: 10.1002/srin.202500172
Materials
The impact of carbon felt thickness and de-bundled felt fibers on dye adsorption: The external surface mattersSustainable Chemistry for the EnvironmentDOI: 10.1016/j.scenv.2025.100254
Processes
Evaluating the dissolution behavior of secondary additives in various slag systemsMaterials
Formation of Micrometer-Sized Textured Hexagonal Silicon Crystals via NanoindentationSmall StructureDOI: 10.1002/sstr.202400552
Systems
Techno-economic assessment of hydrogen supply solutions for industrial siteInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2024.09.099
Materials
A Simplified Method for the Determination of Re and PGE Mass Fractions, and Os Isotope Ratios in Ultramafic Rocks Combined with Se-SnCl2 Co-PrecipitationGeostandards and Geoanalytical ResearchDOI: 10.1111/ggr.70030
Processes
Top Seal Analysis for CO2 Storage in the Vienna Basin: Static and Dynamic PropertiesDOI: 10.3997/2214-4609.202532028
Materials
Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steelPractical metallography = Praktische MetallographieDOI: 10.1515/pm-2025-0010
Materials
Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol ApproachSurfacesDOI: 10.3390/surfaces8010005
Materials
Precious and critical metal potential of historic Cu-Au-As mine waste in the Eastern AlpsMaterials
From logs to layers: Framework for interpreting subsurface facies in Iceland geothermal reservoirsGeothermicsDOI: 10.1016/j.geothermics.2025.103474
Materials
Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatingsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2025.01.020
Systems
Flexibilisierung in der Elektrostahlproduktion: Demand Side Management durch ökonomisch-ökologische Betriebsoptimierung eines ElektrolichtbogenofensDOI: 10.34901/mul.pub.2025.171
Materials
Quantifying grain boundary deformation mechanisms in small-grained metalsNatureDOI: 10.1038/s41586-025-09800-7
Materials
A New Recycling Technology to Produce Premixed Thermal Insulating Mortars from Polyurethane Waste FoamsPolymersDOI: 10.3390/polym17162233
Materials
Synergistic precipitation reactions in a novel high-temperature Ti-alloyScripta materialiaDOI: 10.1016/j.scriptamat.2025.116543
Processes
Educational and Applied Contributions in Energy System Optimization Using a YALMIP-Based MILP FrameworkMaterials
Sample preparation induced artefacts in soft SAC solders from uncooled and cooled Argon ion millingScientific reportsDOI: 10.1038/s41598-025-25169-z
Processes
Untersuchung des Einsatzes oxidischer Legierungselemente im Wasserstoffplasma-Schmelzreduktionsprozess (HPSR)DOI: 10.34901/mul.pub.2026.013
Processes
Electronic structure, phase formation, and defect distribution in the Ba(Ce,Fe,Acc)O3-δ systemActa MaterialiaDOI: 10.1016/j.actamat.2025.120739
Materials
Bridging solution and solid-state mechanism: Confined quasi-solid-state conversion in Li-S batteriesACS Energy LettersDOI: 10.1021/acsenergylett.5c02093
Materials
Revealing trends in catalytic activity of adatoms for hydrogen adsorption on carbon: A case study of graphene and carbon nanotubeCarbon TrendsDOI: 10.1016/j.cartre.2025.100535
Materials
A possible volcanic origin for the Greenland ice core Pt anomaly near the Bølling-Allerød/Younger Dryas boundaryPLOS ONEDOI: 10.1371/journal.pone.0331811
Systems
Detaillierte Modellintegration nationaler Stromnetze in europäische EnergieszenarienProcesses
Evaluation of appropriate carbon capture technologies, their costs and possible future development for Austria until 2040DOI: 10.34901/mul.pub.2026.028
Publications 2024
Processes
High entropy perovskites as efficient and long-term stable air electrodes for solid oxide cellsDOI: 10.34901/mul.pub.2024.213
Materials
Artificial thermal shock cracks in WRe – A proof of concept studyNuclear Materials and EnergyDOI: 10.1016/j.nme.2024.101685
Materials
Strong high-density composites from wheat strawComposites Part A: Applied Science and ManufacturingDOI: 10.1016/j.compositesa.2024.108533
Systems
Cost-Driven Assessment of Technologies\textquoteright Potential to Reach Climate Neutrality in Energy-Intensive IndustriesEnergiesDOI: 10.3390/en17051058
Processes
Untersuchung von Stromsammlerschichten zur Maximierung der Leistungsfähigkeit von HochtemperaturelektrolysezellenDOI: 10.34901/mul.pub.2024.148
Systems
Sektorkopplungslösungen für das Energienetz der Zukunft in OberösterreichDOI: 10.34901/mul.pub.2024.077
Processes
On the Role of Tramp Elements for Surface Defect Formation in Continuous Casting of SteelSteel research internationalDOI: 10.1002/srin.202400494
Processes
Integration of ESG into decision making: Options, trade-offs and comparison - case study OMVDOI: 10.34901/mul.pub.2024.106
Processes
Natural Hydrogen, Exploration at the Southeastern Edge of the Bohemian MassifProcesses
Digitally Enabled Multi-Criteria Decision Making For Energy Efficiency ProjectsProceedings of the Conference on Production Systems and Logistics : CPSL 2024DOI: 10.15488/17742
Materials
Welcome to the 73rd Geomechanics Colloquium 2024 in Salzburg!Geomechanics and tunnelling = Geomechanik und TunnelbauDOI: 10.1002/geot.202480531
Processes
The Efficiency of Disaster and Crisis Management Policy at the Local Level: Lessons from SerbiaMaterials
Effect of different weft-knitted structures on the mechanical performance of bio-based flexible compositesComposites Part C: Open AccessDOI: 10.1016/j.jcomc.2024.100436
Systems
Revolutionizing heat distribution: A method for harnessing industrial waste heat with supra-regional district heating networksApplied energyDOI: 10.1016/j.apenergy.2024.123769
Processes
Synthese und Charakterisierung neuartiger Hochentropie-Seltenerdnickelate als Luftelektrode für FestoxidzellenDOI: 10.34901/mul.pub.2024.237
Materials
fs-laser preparation of half grid specimens for atom probe tomography and transmission electron microscopyMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2024.108672
Materials
How Cracks Induced by Straining Influence the Tribological Properties of Mo Films Deposited on Polyimide SubstratesMetals : open access journal DOI: 10.3390/met14030295
Processes
Experimental investigation of the reverse water gas shift reaction to develop a concept study for a power-to-liquid processDOI: 10.34901/mul.pub.2024.205
Processes
Evaluierung ressourcenschonender und energiesparender Verfahrensrouten zur Behandlung des Abwassers aus der LeiterplattenproduktionMaterials
Thermally-activated locomotion of a bilayer polymer actuatorSmart Materials in ManufacturingDOI: 10.1016/j.smmf.2024.100047
Materials
Development of analytical methods to quantify technology-critical metals in e-waste for recycling assessmentsDOI: 10.34901/mul.pub.2025.044
Processes
A Comprehensive Investigation of the Relationship between Fractures and Oil Production in a Giant Fractured Carbonate FieldProcesses : open access journalDOI: 10.3390/pr12040631
Materials
Asymmetric supercapacitors based on biomass-derived porous activated carbon (PAC)/1D manganese oxide (MnO2) electrodes with high power and energy densitiesMaterials science and engineering B (Solid-state materials for advanced technology)DOI: 10.1016/j.mseb.2024.117368
Materials
Descriptors based on the density of states for efficient machine learning of grain-boundary segregation energiesComputational materials scienceDOI: 10.1016/j.commatsci.2024.113493
Systems
Quantifizierung und Verortung geplanter Wasserstoffmengen in der Steiermark bis 2050 sowie Erstellung eines Transformationspfades für den Aufbau einer steirischen WasserstoffinfrastrukturDOI: 10.34901/mul.pub.2024.160
Materials
From exhaust to extraction: Evaluating car catalysts waste for a resilient economyJournal of environmental chemical engineeringDOI: 10.1016/j.jece.2024.114883
Materials
Green and blue infrastructure as model system for emissions of technology-critical elementsScience of the total environmentDOI: 10.1016/j.scitotenv.2024.173364
Materials
Compost amendment in urban gardens: elemental and isotopic analysis of soils and vegetable tissuesEnvironmental Science and Pollution ResearchDOI: 10.1007/s11356-024-34240-7
Materials
Removal of Crystal Violet Dye from Aqueous Solutions through Adsorption onto Activated Carbon FabricsC – journal of carbon researchDOI: 10.3390/c10010019
Materials
Influence of multiple detection events on compositional accuracy of TiN coatings in atom probe tomographySurface & coatings technologyDOI: 10.1016/j.surfcoat.2023.130318
Materials
On the impact of nitrogen and aluminum doping on silicon carbide polytype stability: Insights from first principle calculationsJournal of the American Ceramic SocietyDOI: 10.1111/jace.20284
Processes
Investigation on thermal plasma pyrolysis of methane for hydrogen gas and solid carbon productionDOI: 10.34901/mul.pub.2025.058
Materials
Flexible und biobasierte Epoxidharzsysteme: Entwicklung, Optimierung und Anwendung in hybriden WerkstoffenProcesses
Thermal treatment of rock phosphate: Phosphorus recovery and production of an alternative binder componentProcesses
Bewertung alkalischer Reststoffe für die CO2-Speicherung durch direkte, wässrige Karbonatisierung: MVA-RückständeMaterials
Structure–Property Relations in Pb-Supersaturated Metastable Sn-Rich Pb-Sn AlloysMetallurgical and materials transactions. A, Physical metallurgy and materials science DOI: 10.1007/s11661-024-07362-3
Processes
Methodenentwicklung zur Staubcharakterisierung beim Wasserstoffplasma-SchmelzreduktionsprozessDOI: 10.34901/mul.pub.2024.236
Materials
Insight into Carbon Black and Silica Fume as Cement Additives for Geoenergy Wells: Linking Mineralogy to Mechanical and Physical PropertiesC – journal of carbon researchDOI: 10.3390/c10030071
Processes
Comparative Life Cycle Assessment of Cotton T-Shirt Production: Conventional Global vs. Fully Automated Manufacturing in EuropeDOI: 10.34901/mul.pub.2024.231
Materials
Unveiling the mechanism of deformation‑induced supersaturationScientific reportsDOI: 10.1038/s41598-024-66164-0
Processes
Erhebung einer potentiellen Energieunabhängigkeit ÖsterreichsProcesses
Processing, visualizing, and using Energy Data from the Battery Innovation Center in order to create a Digital Battery PassportProcesses
A Survey on Drivers, Obstacles and Economic Effects of Digitalization in the Energy-Intensive IndustryConference Proceedings New Energy for Industry 2024DOI: 10.5281/zenodo.13985899
Materials
Physical and mechanical depth relationships of rocks from the Rotokawa Geothermal Reservoir, Taupō Volcanic Zone, New ZealandNew Zealand journal of geology and geophysicsDOI: 10.1080/00288306.2024.2424847
Materials
Interface engineering at the nanoscale: Synthesis of low-energy boundaries Advanced engineering materialsDOI: 10.1002/adem.202400595
Processes
Comprehensive Databases on Natural and Man-Made (Technological) Hazards and Disasters: Mapping Risks and ChallengesProcesses
Analysing the Impacts of an External Power Supplier in a Renewable Energy Community18. Symposium Energieinnovation (EnInnov2024)DOI: 10.2139/ssrn.5648850
ProcessesSystems
Approaches to simplify industrial energy models for operational optimisationJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2024.141848
Processes
Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysisMarine and petroleum geologyDOI: 10.1016/j.marpetgeo.2024.107083
Materials
Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steelMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2024.146220
Systems
Einfluss von markt- und netzorientierten Ladevorgängen auf die steigende Netzbelastung verursacht durch E-MobilitätDOI: 10.34901/mul.pub.2024.158
Processes
Research into PEM electrolysis and the related degradation mechanismsSystems
Tackling Uncertainty: Forecasting the Energy Consumption and Demand of an Electric Arc Furnace with Limited Knowledge on Process ParametersEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en17061326
Processes
Impact of Relative Permeability Hysteresis on CO2 Storage in Saline AquifersGreenhouse Gases: Science and TechnologyDOI: 10.1002/ghg.2319
Materials
Einfluss des Rezyklat-Anteils und des Spannungsverhältnisses auf das Risswachstumsverhalten eines HDPE Blasform TypsDOI: 10.34901/mul.pub.2024.223
Processes
Ökologischer Vergleich von hochverschleißfesten Bauteilen für Anlagen der BiogasproduktionDOI: 10.34901/mul.pub.2024.142
MaterialsProcesses
Optimizing methane plasma pyrolysis for instant hydrogen and high-quality carbon productionInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.07.129
Processes
Experimental investigation and 2D modelling of single-stage oil-cooled biogas methanationDOI: 10.34901/mul.pub.2025.046
Processes
Valorisation of metallurgical residues via carbothermal reduction: A circular economy approach in the cement and iron and steel industryWaste management & researchDOI: 10.1177/0734242X241240040
Materials
UV lamp spectral effects on the aging behavior of encapsulants for photovoltaic modulesSolar energy materials and solar cellsDOI: 10.1016/j.solmat.2023.112674
Systems
Maßnahmen zur Senkung der Rücklauftemperatur im Fernwärme-Verbundnetz der Salzburg AGDOI: 10.34901/mul.pub.2024.247
Materials
The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN NanoplateletsNanomaterialsDOI: 10.3390/nano14070601
Processes
Rotationszerstäubung als Methode der Inwertsetzung von mineralischen ReststoffenDOI: 10.34901/mul.pub.2024.147
Materials
Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitizationMaterials characterizationDOI: 10.1016/j.matchar.2023.113554
Materials
Grain boundary segregation for the Fe-P system: Insights from atomistic modeling and Bayesian inferenceActa materialiaDOI: 10.1016/j.actamat.2024.120215
Systems
Survey of Industrial Excess Heat Potentials in AustriaProcessesSystems
Carbon Management für ein klimaneutrales ÖsterreichElektrotechnik und Informationstechnik : e & iDOI: 10.1007/s00502-024-01235-8
Materials
Revealing the embrittlement phenomena after post-weld heat treatment of high-strength weld metal using high-resolution microscopyJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2024.10.186
Processes
Framework for the Design as well as Economic and Environmental Optimization of Geothermal District Heating and Cooling NetworksDOI: 10.34901/mul.pub.2024.159
Processes
A bio-reactive transport model for biomethanation in hydrogen underground storage sitesGreenhouse Gases: Science and TechnologyDOI: 10.1002/ghg.2307
Processes
Primary Drivers, Obstacles and Economic Effects of Digitalization in the Energy-Intensive IndustrySystems
A Combined Investment and Operational Optimization Approach for Power-to-Methanol PlantsEnergiesDOI: 10.3390/en17235937
Materials
Perspective on pathways towards responsible surface engineeringSurface & coatings technologyDOI: 10.1016/j.surfcoat.2024.131486
Materials
Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)International Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2024.09.016
Processes
Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis Geomechanics and geophysics for geo-energy and geo-resourcesDOI: 10.1007/s40948-024-00864-9
Materials
In situ and ex situ quantification of nanoparticle fluxes in magnetron sputter inert gas condensation: A Cu nanoparticle case studyJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0003283
Materials
Untersuchung möglicher Anlassversprödung in perlitischen Stählen mit erhöhten Gehalten an SpurenelementenSystems
Prozess- und Abwärmeerhebung der Molkerei GmundenMaterials
Fertilization efficiency of thirty marketed and experimental recycled phosphorus fertilizersJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2024.142957
MaterialsSystems
Optimized Integration of Medium-Voltage Multimegawatt DC Charging Stations: Concepts, Guidelines and AnalysisWorld electric vehicle journalDOI: 10.3390/wevj15100450
Processes
Investigations of selected influences on the hydrogen-based reduction of iron ore ultra-fines in a fluidized bedDOI: 10.34901/mul.pub.2024.137
Materials
Scalable synthesis of biomass-derived three-dimensional hierarchical porous activated carbons for electrochemical energy storage and hydrogen physisorption Journal of energy storageDOI: 10.1016/j.est.2024.112085
Processes
Entwicklung eines Teststandes zur Bestimmung der Permeabilität poröser Materialien in Protonenaustauschmembran-ElektrolyseurenDOI: 10.34901/mul.pub.2024.104
Materials
Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical propertiesInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2024.106890
Materials
Development of high entropy alloy thin films for hydrogen permeation barriersDOI: 10.34901/mul.pub.2025.063
Materials
Hydrogen induced changes in the phase composition and micro-structure of downhole cements: Fundamental research within the context of underground hydrogen storageInternational Journal of Hydrogen EnergyDOI: 10.1016/j.ijhydene.2024.09.449
Materials
Annealing activated substrate element diffusion and its influence on the microstructure and mechanical properties of CVD TiN/TiCN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2024.131079
Processes
Phase composition and proton uptake of acceptor-doped self-generated Ba(Ce,Fe)O3-δ – Ba(Fe,Ce)O3-δ compositesSolid State IonicsDOI: 10.1016/j.ssi.2024.116474
Materials
Design and characterization of novel Zr-Al-Fe-Y metallic glasses with nanoscale phase separationMaterialiaDOI: 10.1016/j.mtla.2024.102104
Processes
Evaluating refractory material performance in pyrometallurgical recycling of lithium-ion batteries under a reducing atmosphereCeramics InternationalDOI: 10.1016/j.ceramint.2024.08.220
Materials
In-use dissipation of technology-critical elements from vehicles and renewable energy technologies in Vienna, Austria: A public health matter?Journal of industrial ecologyDOI: 10.1111/jiec.13571
Materials
Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy Advanced engineering materialsDOI: 10.1002/adem.202400255
Processes
CTRM Software Module - Emissions TradingProcesses
Investigating the Potential of a Transparent Xanthan Polymer for Enhanced Oil Recovery: A Comprehensive Study on Properties and Application EfficacyEnergiesDOI: 10.3390/en17051266
Materials
Detektion von CO, CO2, NO, NO2 und Schwebestaub im Rahmen des IGNITE-ProjektesDOI: 10.34901/mul.pub.2024.082
ProcessesSystems
A methodology for the determination of future Carbon Management Strategies: A case study of AustriaInternational Journal of Sustainable Energy Planning and ManagementDOI: 10.54337/ijsepm.8280
Materials
Predictive Model for Catalytic Methane PyrolysisJournal of physical chemistry C (C, Nanomaterials and interfaces)DOI: 10.1021/acs.jpcc.4c01690
Systems
Techno - Ökonomische Bewertung potenzieller Carbon Capture and Utilization (CCU) - sowie Carbon Capture and Storage (CCS) - Maßnahmen für die ROHRDORFER ZEMENT GmbH in GmundenDOI: 10.34901/mul.pub.2024.241
Systems
Assessment of technology-based options for climate neutrality in Austrian manufacturing industryHeliyonDOI: 10.1016/j.heliyon.2024.e25382
Processes
Numerical and Stochastic Interpretation of CO2-Brine Primary DisplacementDOI: 10.34901/mul.pub.2024.138
Processes
Evaluation of the Hydrogen Value Chain: Integrating Production with Distribution NetworksDOI: 10.3997/2214-4609.202421186
Processes
Capacity Building in Serbia for Disaster and Climate Risk EducationDisaster Risk ReductionDOI: 10.1007/978-981-97-5987-3_17
Materials
Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited FilmNanomaterialsDOI: 10.3390/nano15010043
Processes
Austrian Electricity Market Transformation: Analysing effects of aFRR/mFRR LMOL Limits regarding Efficiency in Balancing Energy Markets and the Local Intraday MarketSystems
Regionalisierung und Modellierung des zukünftigen Ladelastbedarfs der E-Mobilität im GüterverkehrDOI: 10.34901/mul.pub.2024.230
Materials
Machine learning assisted calibration of PVT simulations for SiC crystal growthCrystEngCommDOI: 10.1039/d4ce00866a
Materials
Sputter deposited silver niobate thin films: Pathway towards phase purityThin solid filmsDOI: 10.1016/j.tsf.2024.140505
Materials
Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion processMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2024.146102
Materials
Effects of processing conditions on electrical properties of cold sintered BaTiO3Systems
Analyse der notwendigen Niederspannungsnetzentwicklung bei Ausschöpfung der Photovoltaik-DachflächenpotenzialeDOI: 10.34901/mul.pub.2024.150
Processes
Experimentelle Validierung einer Versuchsanlage zur Anreicherung von AmmoniumDOI: 10.34901/mul.pub.2025.048
Processes
Erarbeitung notwendiger Vorbehandlungsschritte zum effektiven Recycling der Metallphase in einem innovativen pyrometallurgischen Recyclingkonzept für Lithium-Ionen-AkkusDOI: 10.34901/mul.pub.2025.054
Processes
Modeling of CO2 Injection and Sinking in Supercritical Geothermal SystemsMaterials
Analysis of technology-critical elements in environmental samples based on inductively coupled plasma mass spectrometryDOI: 10.34901/mul.pub.2024.217
Systems
Optimierung der Auswahl erneuerbarer EnergiespeichertechnologienProcesses
A Facile Synthesis of Photocatalytic Fe(OH)3 Nanoparticles for Degradation of PhenolChemistrySelectDOI: 10.1002/slct.202401367
Materials
Hydrogen Embrittlement of the Precipitation Hardening Nickel-Based Alloy 718DOI: 10.34901/mul.pub.2024.167
Materials
Plasma-Treated Cobalt-Doped Nanoporous Graphene for Advanced Electrochemical ApplicationsC – journal of carbon researchDOI: 10.3390/c10020031
Systems
A comparative analysis of the economic feasibility of reversible hydrogen systems based on time-resolved operation optimisationApplied energyDOI: 10.1016/j.apenergy.2024.123639
Materials
Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagramWelding in the worldDOI: 10.1007/s40194-024-01904-4
Materials
Short-Time Magnetron Sputtering for the Development of Carbon–Palladium NanocompositesNanomaterialsDOI: 10.3390/nano14020164
Systems
A breakthrough in achieving carbon neutrality in Poland: Integration of renewable energy sources and Poland's 2040 energy policyEnergy ReportsDOI: 10.1016/j.egyr.2024.12.033
Systems
Modellierung eines Pyrolyseprozesses zur optimalen Aufbereitung von Sekundärrohstoffen unter Nutzung von verfügbaren AbwärmepotentialenDOI: 10.34901/mul.pub.2024.081
Processes
Inwertsetzung von metallurgischen Schlacken: Wertmetall/(Phosphor)rückgewinnung und Herstellung einer BindemittelkomponenteVORTRÄGE-Konferenzband zur 17. Recy DepoTech-KonferenzProcesses
Einfluss von Schlackenbildner auf die Legierungsqualität und das Schmelzverhalten von Schwarzmasse von Lithium-Ionen-Batterien im pyrometallurgischen InduMelt-RecyclingprozessDOI: 10.34901/mul.pub.2024.238
Processes
Economic-Technical Evaluation of Insulated Tubings for Completions in Geothermal Energy ApplicationsSystems
Analyse und Prognose des elektrischen und thermischen Energiebedarfs der Produktion in der PCB IndustrieDOI: 10.34901/mul.pub.2024.108
Materials
A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternativeActa materialiaDOI: 10.1016/j.actamat.2024.120113
Processes
Advancing Sustainable Energy Solutions: The Application of Borehole Heat Exchangers in District Heating, Aquaculture, Agriculture and BeyondSystems
Transitioning towards climate neutral industrial energy systems: Analysing pathways and boundaries for the manufacturing industries in a case study of AustriaDOI: 10.34901/mul.pub.2025.027
Systems
ENERGY-BASED INDUSTRIAL SYMBIOSIS IN CLIMATE NEUTRAL INDUSTRIAL ENERGY SYSTEMS: THE INFLUENCE OF TECHNOLOGICAL INNOVATIONNEFI CONFERENCE 2024DOI: 10.5281/zenodo.13985900
Publications 2023
Materials
Radionuclide removal from aqueous solutions using oxidized carbon fabricsMaterialsDOI: 10.3390/ma16237479
Materials
Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au systemActa materialiaDOI: 10.1016/j.actamat.2022.118577
Processes
The influence of prior-oxidation on the reducibility and fluidization performance of magnetite iron oreDOI: 10.34901/mul.pub.2024.002
Processes
Application of existing marine pipelines in terms of carbon dioxide transportationDOI: 10.34901/mul.pub.2023.218
Processes
Charakterisierung und Optimierung von La2Ni0.8Co0.2O4+δ als Luftelektrodenmaterial in Festoxid-ZellenDOI: 10.34901/mul.pub.2023.242
Systems
The effect of “energy of scale” on the energy consumption in different industrial sectorsSustainable production and consumptionDOI: 10.1016/j.spc.2023.07.031
Materials
Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations Advanced engineering materialsDOI: 10.1002/adem.202300610
Processes
Sicherheitstechnische Betrachtung und Planung der Zumischung von Wasserstoff in die Erdgaszuleitung für den RecoDust ProzessDOI: 10.34901/mul.pub.2024.008
Materials
Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approachesDefence TechnologyDOI: 10.1016/j.dt.2022.11.012
Processes
Erneuerbare Energiegemeinschaften: Eine modelltheoretische Analyse der Rahmenbedingungen in ÖsterreichEW : Magazin für die Energie-WirtschaftProcesses
Vorversuche eines kontinuierlichen, pyrometallurgischen Lithium-Ionen Batterie RecyclingverfahrensDOI: 10.34901/mul.pub.2023.172
Materials
Superconductivity in medium- and high-entropy alloy thin films: Impact of thickness and external pressurePhysical review : B, Condensed matter and materials physicsDOI: 10.1103/PhysRevB.107.024505
Materials
Annealing effects on Al/polyimide adhesion in flexible optical solar reflectorsIOP Conference Series: Materials Science and EngineeringDOI: 10.1088/1757-899X/1287/1/012006
Materials
Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applicationsJournal of Materials Research and TechnologyDOI: 10.1016/j.jmrt.2023.10.163
Materials
On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio studyActa materialiaDOI: 10.1016/j.actamat.2023.118951
Processes
Simulation of CO2-Brine Primary Displacement in Heterogeneous Carbonate RocksProcesses
Large-scale underground hydrogen storage: Integrated modeling of reservoir-wellbore systemInternational Journal of Hydrogen Energy DOI: 10.1016/j.ijhydene.2023.01.227
Processes
Investigation of the strength and hydraulic properties of T-joints with different articulation anglesSystems
Requirements for the energy-optimal transformation of the european energy systemDOI: 10.34901/mul.pub.2023.127
Materials
The Potential of Deep Geothermal Energy in Tyrol—Based on a Pre-feasibility StudyBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-023-01405-9
Materials
Spontaneous formation of carbon dots helps to distinguish molecular fluorophores speciesApplied surface scienceDOI: 10.1016/j.apsusc.2022.155536
Materials
Characterization of material interactions of polymers in PV modulesDOI: 10.34901/mul.pub.2023.57
Materials
Nanoindentation creep of supercrystalline nanocompositesMaterials and DesignDOI: 10.1016/j.matdes.2023.112000
Materials
From unlikely pairings to functional nanocomposites: FeTi–Cu as a model systemMaterials today advancesDOI: 10.1016/j.mtadv.2023.100433
Processes
Human resource development for environmental security and emergency managementProcesses
Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel ProductionEnergiesDOI: 10.3390/en16124673
Materials
On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloyIntermetallicsDOI: 10.1016/j.intermet.2023.107962
MaterialsSystems
Inselfähiges Heimspeichersystem basierend auf wiederverwendeten BatterienMaterials
Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steelsJournal of materials scienceDOI: 10.1007/s10853-023-08472-w
Systems
Integration of a rSOC-system to industrial processesEnergy Conversion and Managment: XDOI: 10.1016/j.ecmx.2023.100425
Materials
Influence of MnS inclusion characteristics on generation of white etching cracks in 100Cr6 bearing steelWearDOI: 10.1016/j.wear.2023.205129
Processes
Thermodynamische Betrachtung der Behälterglasherstellung und Grundlagen zur Entwicklung eines neuartigen FlugstromschmelzreaktorsDOI: 10.34901/mul.pub.2023.59
Materials
Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatingsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2022.106025
Materials
Implementing the Krafla Magma Testbed (KMT): linking volcanology and geothermal research for future hazard and energy solutionsSystems
Industrial Excess Heat - INXS: Erhebung industrieller Abwärmepotenziale in ÖsterreichMaterials
Oxidation behavior of a cathodic arc evaporated Cr0.69Ta0.20B0.11N coatingJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0002356
Materials
High density of stacking faults strengthened TaN/TiN multilayerActa materialiaDOI: 10.1016/j.actamat.2023.119027
Materials
Phase equilibria in the Ti-Al-W system between 800 and 1300 ◦CMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2023.106291
Systems
Advanced Modeling and Analysis of Electrical Grids for Multi-Energy System ApproachesDOI: 10.34901/mul.pub.2023.49
Materials
Temperature dependence of solute segregation energies at W GBs from first principlesScripta materialiaDOI: 10.1016/j.scriptamat.2022.115059
Materials
Synthesis of crystalline silver niobate thin films opening pathways for future process developmentVacuumDOI: 10.1016/j.vacuum.2023.112077
Materials
Mechanical Characterization of Zinc Oxide produced by an optimized Cold Sintering ProcessProcesses
Depositional Environments and Petroleum Potential of Coal in the Miocene Warukin Formation and Eocene Tanjung Formation, South Kalimantan, IndonesiaDOI: 10.34901/mul.pub.2023.120
Processes
Marktanalyse und Wirtschaftlichkeitsbetrachtung der dezentralen Energieerzeugung und -speicherung für EndkonsumentenMaterials
Influence of the aspect ratio of the micro-cantilever on the determined Young\textquoterights modulus using the Euler-Bernoulli equationMaterials Today CommunicationsDOI: 10.1016/j.mtcomm.2023.106225
Materials
Dataset of fire tests with lithium-ion battery electric vehicles in road tunnelsData in BriefDOI: 10.1016/j.dib.2022.108839
Processes
Effects of the Electrodes\textquoteright Shape and Graphite Quality on the Arc Stability During Hydrogen Plasma Smelting Reduction of Iron OresSteel research internationalDOI: 10.1002/srin.202200818
Processes
Energiewirtschaftliche Machbarkeitsstudie zum Ausbau des Fernwärmenetzes in Salzburg - Zone BMaterials
Reactively-sputtered super-hydrophilic ultra-thin titania films deposited at 120°CMaterials Research Express : MRXDOI: 10.1088/2053-1591/ad0450
Materials
Impact of d‑states on transition metal impurity diffusion in TiNScientific reports (London : Nature Publishing Group)DOI: 10.1038/s41598-023-34768-7
Processes
Microstructural comparison of mudstone core and cuttings material for seal rock studiesProcesses
Organic geochemistry and petrography of Miocene ombrotrophic coals in the tropical Asem-Asem Basin (Kalimantan, Indonesia): Comparison to coeval subtropical coals in the Eastern AlpsAustrian journal of earth sciencesDOI: 10.17738/ajes.2023.0004
Processes
Transient effects in coupled wellbore-reservoir modelling for geological CO2 sequestrationDOI: 10.34901/mul.pub.2023.200
Materials
Efficient preparation of microtip arrays for atom probe tomography using fs-laser processingUltramicroscopyDOI: 10.1016/j.ultramic.2022.113672
Processes
Simultaneous interpretation of SCAL data with different degrees of freedom and uncertainty analysis Computers and geotechnicsDOI: 10.1016/j.compgeo.2022.105074
Materials
Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasmaSurface & coatings technologyDOI: 10.1016/j.surfcoat.2023.129344
Processes
70 Years of LD Steelmaking - Quo Vadis?Iron and Steel TechnologyProcesses
Investigation of the phenomena occurring in an inductively heated packed bed reactor for the pyrometallurgical recovery of valuable metals from lithium-ion batteriesDOI: 10.34901/mul.pub.2023.52
Systems
Analysing sector coupling technologies for Re-purposing coal-fired power plants–Case study for the ENTSO-E grid IET Energy systems integrationDOI: 10.1049/esi2.12087
Materials
W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from in situ SEM/TEM growth to large scale synthesis and fundamental structural understandingCrystal growth & designDOI: 10.1021/acs.cgd.3c01094
Processes
Electrochemical and microstructural characterization of the high-entropy perovskite La0.2Pr0.2Nd0.2Sm0.2Sr0.2CoO3-δ for solid oxide cell air electrodesFuel CellsDOI: 10.1002/fuce.202300036
Processes
Strategies for optimizing process parameters of hydrogen plasma smelting reduction plantsSystems
Application of an integrated life cycle assessment approach toward a carbon-neutral industryDOI: 10.34901/mul.pub.2023.190
Materials
Phase stability of TiAl-based BCC high entropy alloysIntermetallicsDOI: 10.1016/j.intermet.2023.107893
Processes
Geothermal Heat Utilization Feasibility StudyMaterials
Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipesEngineering Fracture MechanicsDOI: 10.1016/j.engfracmech.2023.109423
Processes
Untersuchung des Verhaltens von Phosphor, Schwefel und Kupfer während des Wasserstoffplasma-SchmelzreduktionsprozessesDOI: 10.34901/mul.pub.2023.149
Materials
Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloyJournal of magnesium and alloysDOI: 10.1016/j.jma.2023.05.012
Processes
Induced Seismicity: Analysis of fault rocks from the Vienna BasinProcesses
Sicherheitsanalyse der InduRed Anlage für den Einsatz von Schwarzmasse aus Lithium-Ionen BatterienDOI: 10.34901/mul.pub.2024.026
MaterialsSystems
Automatisierte Vermessung samt Kennliniendarstellung eines PhotovoltaikpanelsMaterials
Multiple transition temperature enhancement in superconducting TiNbMoTaW high entropy alloy films through tailored N incorporationActa materialiaDOI: 10.1016/j.actamat.2023.119428
Materials
Enhancing mechanical properties of ultrafine-grained tungsten for fusion applicationsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2023.106125
Processes
Evaluation of Process Structures and Reactor Technologies of an integrated Power-to-Liquid Plant at a Cement Factory Journal of CO2 utilizationDOI: 10.1016/j.jcou.2023.102449
Materials
Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperaturesIntermetallicsDOI: 10.1016/j.intermet.2022.107797
Materials
Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopyMRS BulletinDOI: 10.1557/s43577-023-00549-w
Materials
Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminideIntermetallicsDOI: 10.1016/j.intermet.2023.107852
Materials
Processing of ceramic materials with tailored microstructures deploying tape casting and stereolithographic 3D-printingDOI: 10.34901/mul.pub.2023.198
Processes
Economic analysis of state-of-the-art low concentration carbon capture methodsDOI: 10.34901/mul.pub.2023.171
Materials
Sensortechnologien für online- Analysen von TunnelausbruchmaterialDOI: 10.34901/mul.pub.2024.016
Systems
Pathways to climate-neutral EAF Steel Production based on Energy Efficiency and Integration of Renewable EnergyDOI: 10.34901/mul.pub.2023.56
Systems
Development of the virtual battery concept in the paper industry: Applying a dynamic life cycle assessment approachSustainable production and consumptionDOI: 10.1016/j.spc.2023.07.013
Materials
Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formatsInternational journal of refractory metals & hard materialsDOI: 10.1016/j.ijrmhm.2022.106032
Materials
Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.168005
Materials
A correlative experimental and theoretical investigation of phase formation and thermal stability of a quaternary Cr0.69Ta0.20B0.11N coatingMaterialiaDOI: 10.1016/j.mtla.2023.101931
Materials
Corrosion of passive alloys in aqueous solutions at different pH valuesMaterials
Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loadingJournal of vacuum science & technology / A (JVST)DOI: 10.1116/6.0002348
Processes
Hydrogen intensified synthesis processes to valorise process off-gases in integrated steelworksMatériaux et techniquesDOI: 10.1051/mattech/2023025
Systems
Modellierung von Energienachfrageszenarien für das Bundesland Oberösterreich als Wegweiser zur dekarbonisierten EnergiezukunftDOI: 10.34901/mul.pub.2023.248
Materials
Segregation to α2/γ interfaces in TiAl alloys: A multiscale QM/MM studyPhysical review materials DOI: 10.1103/PhysRevMaterials.7.063604
Processes
Thermodynamic modeling of the Fe-Sn system including an experimental re-assessment of the liquid miscibility gapJournal of Materials InformaticsDOI: 10.20517/jmi.2022.37
Processes
Underground thermal energy storage: fundamental concepts, best practice examples and storage potential evaluation for selected Vienna Basin aquifersSystems
Synthetic load profiles of non-energy intensive industrial sites: A combined bottom-up and top-down approachSustainable Energy, Grids and NetworksDOI: 10.1016/j.segan.2023.101078
Processes
Wirtschaftliche Bewertung der Auswirkungen von elektrischen Netzqualitätsproblemen auf IntralogistikanlagenDOI: 10.34901/mul.pub.2023.258
Processes
A techno-economic assessment of the conversion of existing oil and gas workover rigs for geothermal projectsDOI: 10.34901/mul.pub.2023.207
Materials
Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methodsPolymer TestingDOI: 10.1016/j.polymertesting.2023.108130
Systems
Erhebung von Energieeinsatz, Abwärme- und Effizienzpotenzialen im Bereich der Molkerei Gmunden und der Brauerei HofstettenDOI: 10.34901/mul.pub.2024.007
Materials
Deformation and failure behavior of nanocrystalline WCuMaterials Science and Engineering ADOI: 10.1016/j.msea.2023.145760
Processes
CFD-DEM Modeling of Shaft Furnaces Using the Volume Fraction Smoother ApproachChemical Engineering and TechnologyDOI: 10.1002/ceat.202200617
Materials
Models of configurationally-complex alloys made simpleComputer physics communicationsDOI: 10.1016/j.cpc.2023.108664
Materials
Hydrogen Applicability of Steels in Gas Storage FacilitiesMaterials
In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel Advanced engineering materialsDOI: 10.1002/adem.202300410
Processes
Comparison and techno-economic evaluation of process routes for lower olefin production via Fischer–Tropsch and methanol synthesisInternational Journal of Greenhouse Gas ControlDOI: 10.1016/j.ijggc.2023.103985
MaterialsProcesses
Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2023.172400
Systems
Biorefinery development for the conversion of softwood residues into sustainable aviation fuel: Implications from life cycle assessment and energetic-exergetic analysesJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2022.135815
Materials
Is it meaningful to quantify vacancy concentrations of nanolamellar (Ti,Al)N thin films based on laser-assisted atom probe data?Surface & coatings technologyDOI: 10.1016/j.surfcoat.2023.130020
MaterialsSystems
Video Stream Processing for an Autonomous Tunnel Drainage RoverSensors and Electronic Instrumentation AdvancesDOI: 10.13140/RG.2.2.25009.76647
MaterialsProcesses
Old core, new tricks: a comparative study of old and new mudstone cores for applications in the energy transitionGeoenergyDOI: 10.1144/geoenergy2023-013
Materials
Oxidation mechanism of sputter deposited model SiNx/TiN/SiNx coatingsSurface and Coatings TechnologyDOI: 10.1016/j.surfcoat.2023.129753
Processes
Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon ProductionEnergiesDOI: 10.3390/en17010167
Materials
Improved thermolytic dehydrogenation of LiBH4 nanoconfined in few-layer graphene with different functionalitiesMaterials Today SustainabilityDOI: 10.1016/j.mtsust.2023.100486
Materials
Decomposition of CrN induced by laser-assisted atom probe tomographyUltramicroscopyDOI: 10.1016/j.ultramic.2022.113673
Materials
A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloyScripta materialiaDOI: 10.1016/j.scriptamat.2022.115247
Materials
Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation studyMaterials and DesignDOI: 10.1016/j.matdes.2023.112198
Processes
Co-solid oxide electrolysis and methanationHigh-Temperature ElectrolysisDOI: 10.1088/978-0-7503-3951-3ch15
Publications 2022
Processes
Using Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Mathematical Evaluation MaterialsDOI: 10.3390/ma15113943
MaterialsSystems
Optimization-based investigation of different repurposing concepts for Austrian coal-fired power plantsElektrotechnik und InformationstechnikDOI: 10.1007/s00502-022-01090-5
Processes
Risk assessment on fire hazards in the collection of waste portable batteries in AustriaProcesses
Techno-economic assessment of emerging power-to-gas technologies using advanced generic methodsProcesses
Adaption eines Strömungskalorimeters zur Heizwertbestimmung erneuerbarer GaseSystems
Modelling, Simulation and Optimisation of Grid-Based Multi-Energy Systems Considering Different Spatial ResolutionsMaterials
Experimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °CCrystalsDOI: 10.3390/cryst12091184
Processes
Thermodynamische Simulation zur Systemauslegung von zukünftigen HPSR-AnlagenProcesses
Numerical Study of Formation Dry-out and Salt Precipitation due to Supercritical CO2 InjectionMaterials
Thermal stability of a cathodic arc evaporated Cr 0.74 Ta 0.26 N coatingMaterialiaDOI: 10.1016/j.mtla.2022.101434
Processes
Multidisciplinary Assessment of a Novel Carbon Capture and Utilization Concept including Underground Sun ConversionEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15031021
Materials
Evolution of the fracture properties of arc evaporated Ti1-xAlxN coatings with increasing Al contentSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128690
Materials
Anomalous thermal conductivity in amorphous niobium pentoxide thin films: A correlation study between structure and thermal propertiesMaterialiaDOI: 10.1016/j.mtla.2022.101601
Materials
The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure ApproachJOMDOI: 10.1007/s11837-022-05290-4
Materials
Development of a demonstration project for the construction of a compressed air storage in existing disused mining galleries based on geonumerical modellingMaterials
Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels Advanced engineering materialsDOI: 10.1002/adem.202200532
Materials
Ab initio -guided X-ray photoelectron spectroscopy quantification of Ti vacancies in Ti1−δOxN1−x thin filmsActa materialiaDOI: 10.1016/j.actamat.2022.117778
Materials
Materials Engineering for Flexible Metallic Thin Film ApplicationsMaterialsDOI: 10.3390/ma15030926
Materials
Application of Calcified Structures in Fish as Indicators of Metal Exposure in Freshwater EcosystemsEnvironmentsDOI: 10.3390/environments9020014
Materials
Microstructural adjustment of hot-rolled Ti–6Al–4V based on a CCT diagramMaterials science and technologyDOI: 10.1080/02670836.2022.2068243
Materials
Small-scale models and tests at the “Zentrum am Berg”Systems
Ganymed - The development of an industrial load profile generation softwareConference Proceedings New Energy for Industry 2022MaterialsSystems
Entwicklung eines Mess- und Kontrollsystems für einen Hochvolt-BatterieprüfstandMaterials
Hydrogen uptake and permeation in steels for oil and gas production and comparison with ARMCOTM-FeMaterials
In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4VMaterials characterizationDOI: 10.1016/j.matchar.2022.112207
Systems
Modelling and Simulation/Optimization of Austria\textquoterights National Multi-Energy System with a High Degree of Spatial and Temporal ResolutionEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15103581
Processes
Business opportunities to extend Oil Well Life Recovering Geothermal Energy in the Vienna BasinMaterials
Evaluation of the CO2 Storage Capacity in Sandstone Formations from the Southeast Mesohellenic trough (Greece)Energies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15103491
Processes
Grenzwertbestimmung und Analyse von Aluminium- und Kohlenstoffzuschlägen zu Kathodenmaterialien aus Lithium-Ionen Batterien für die Wertmetallrückgewinnung im pyrometallurgischen Reaktorkonzept InduRedMaterials
Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatingsSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128098
Materials
Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings communitySurface & coatings technologyDOI: 10.1016/j.surfcoat.2021.127949
Materials
Applications of Data Driven Methods in Computational Materials DesignBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01182-3
Materials
How Si affects the microstructural evolution and phase transformations of intermetallic 훾-TiAl based alloysMaterialiaDOI: 10.1016/j.mtla.2022.101475
Materials
Energies and structures of Cu/Nb and Cu/W interfaces from density functional theory and semi-empirical calculationsMaterialiaDOI: 10.1016/j.mtla.2022.101362
Systems
Time-Series Forecasting of an Electric Steel Mill's Power Demand: A Neural Network ApproachMaterials
Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloyMaterials and DesignDOI: 10.1016/j.matdes.2022.110530
Materials
Results of the EU H2020 project ThermoDrill – Contribution of rock mechanics to the utilization of geothermal energyGeomechanics and tunnelling = Geomechanik und TunnelbauDOI: 10.1002/geot.202100086
Materials
Accurate ab initio modeling of solid solution strengthening in high entropy alloysPhysical review materials DOI: 10.1103/PhysRevMaterials.6.103602
Systems
Synthetic load profile generation for production chains in energy intensive industrial subsectors via a bottom-up approachJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2021.130024
Materials
Tribological investigations of Mo films deposited on thin polyimide substratesSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128549
Materials
Fire tests with lithium-ion battery electric vehicles in road tunnelsFire Safety JournalDOI: 10.1016/j.firesaf.2022.103695
Systems
Climate neutrality strategies for energy-intensive industries: An Austrian case studyCleaner Engineering and TechnologyDOI: 10.1016/j.clet.2022.100545
Materials
Einfluss der Grenzflächeneigenschaften auf die mechanischen Eigenschaften von kurzfaserverstärkten VerbundenMaterials
Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metalMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2022.143550
Processes
Entscheidungsgrundlage für die Implementierung eines EnergiemonitoringsystemsMaterials
W 4f electron binding energies in amorphous W-B-C systemsApplied surface scienceDOI: 10.1016/j.apsusc.2022.152824
Materials
Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-NActa materialiaDOI: 10.1016/j.actamat.2022.117897
Processes
A Combined Hydro-Mechanical and Pyrometallurgical Recycling Approach to Recover Valuable Metals from Lithium-Ion Batteries Avoiding Lithium SlaggingBatteriesDOI: 10.3390/batteries9010015
Processes
Evaluation of the suitability of an inductively heated carbon bed reactor for the pyrometallurgical recycling of lithium-ion batteriesMaterials
Probing the charge transfer and electron–hole asymmetry in graphene–graphene quantum dot heterostructureNanotechnologyDOI: 10.1088/1361-6528/ac6c38
Materials
In-situ observation of the phase evolution during an electromagnetic-assisted sintering experiment of an intermetallic γ -TiAl based alloyScripta materialiaDOI: 10.1016/j.scriptamat.2021.114233
Materials
Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thicknessSurface & coatings technologyDOI: 10.1016/j.surfcoat.2021.128070
Systems
Provision of Demand-Side Flexibility through the Integration of Power-to-Gas Technologies in an Electric Steel MillEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15165815
Processes
Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFPMetalsDOI: 10.3390/met12101642
Materials
Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD studyActa materialiaDOI: 10.1016/j.actamat.2022.117727
Materials
RasPos: Subsurface People Detection and Localization using Wi-Fi Probe RequestsMaterials
Cooling rate controlled aging of a Co-Free Fe-Ni-Cr-Mo-Ti-Al maraging steelMetals : open access journal DOI: 10.3390/met12040538
Processes
Stack & system architecture analysis of centralized and decentralized RSOC applicationsMaterials
Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatingsScripta materialiaDOI: 10.1016/j.scriptamat.2021.114492
Processes
Integriertes RessourcenmanagementWING-BusinessProcesses
Economic Evaluation of Renewable Hydrogen Integration into Steelworks for the Production of Methanol and MethaneEnergiesDOI: 10.3390/en15134650
Systems
Estimation of Grid Reinforcement Costs Triggered by Future Grid Customers: Influence of the Quantification Method (Scaling vs. Large-Scale Simulation) and Coincidence Factors (Single vs. Multiple Application)Energies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15041383
Processes
Hydrogen role in the valorization of integrated steelworks process off-gases through methane and methanol synthesesMatériaux et techniquesDOI: 10.1051/mattech/2022009
Processes
Versorgungssicherheit: CO2-Neutralität als Chance?WING-BusinessMaterials
Prediction of grain boundary chemistry in multicomponent Mo alloys with coupled precipitation and segregation kinetics simulationsActa materialiaDOI: 10.1016/j.actamat.2021.117482
Processes
Introduction of Integrated Resource Management for Sustainable Development of IndustriesGlobal Challenges for a Sustainable SocietyProcesses
Analysis of the Usability of Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Review MaterialsDOI: 10.3390/ma15072687
Processes
Insect Starter Package: A Case StudySystems
Improving the methodology of national energy balances to adapt to the energy transitionEnergy Strategy ReviewsDOI: 10.1016/j.esr.2022.100994
Materials
Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storageChemical Engineering JournalDOI: 10.1016/j.cej.2021.131730
Materials
On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder Advanced engineering materialsDOI: 10.1002/adem.202201242
Processes
Numerical Study of Geological Hydrogen ConversionProcesses
Bewertung des Erweichungs- und Aufschmelzverhaltens von DRI im HochofenMaterials
Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6 MaterialsDOI: 10.3390/ma15196600
Materials
Phase equilibria in the Ti-rich part of the Ti-Al-Nb system: Part I: Low-Temperature Phase Equilibria Between 700 and 900 °CJournal of phase equilibria and diffusionDOI: 10.1007/s11669-022-00963-8
Systems
Evaluating the integration of future e-mobility into distribution power networksMaterials
Nanoporous Carbon Electrodes Derived from Coffee Side Streams for Supercapacitors in Aqueous ElectrolytesNanomaterialsDOI: 10.3390/nano12152647
Systems
Decarbonisation of Austria: Exergy Effiency and Sector CouplingProcesses
Coal deposition in the Barito Basin (Southeast Borneo): The Eocene Tanjung Formation compared to the Miocene Warukin FormationInternational journal of coal geologyDOI: 10.1016/j.coal.2022.104117
Materials
Strain-stabilized Al-containing high-entropy sublattice nitridesActa materialiaDOI: 10.1016/j.actamat.2021.117483
Materials
The influence of chemistry on the interface toughness in a WTi-Cu systemActa MaterialiaDOI: 10.1016/j.actamat.2022.117813
Processes
Nutzungspotentiale des Nebenprodukt-Sauerstoffs der WasserelektrolyseProcesses
2D heterogeneous model of a polytropic methanation reactor Journal of CO2 utilizationDOI: 10.1016/j.jcou.2022.102059
Processes
In-situ investigation on the effect of carbon and phosphorus on γ-Fe grain growth by High-Temperature Laser Scanning Confocal MicroscopeMaterials
Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elementsMaterialiaDOI: 10.1016/j.mtla.2022.101321
Materials
Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloysJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2022.167177
Materials
Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic ScaleMetals : open access journal DOI: 10.3390/met12060906
Processes
Determination of the economic value of energy flexibility with a regional model approachMaterials
Stability and ordering of bcc and hcp TiAl+Mo phases: An ab initio studyComputational materials scienceDOI: 10.1016/j.commatsci.2021.111163
Processes
Strategische Frühaufklärung im Rahmen einer Carbon Net-Zero StrategieProcesses
Influence of Fracture Types on Oil Production in Naturally Fractured ReservoirsEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en15197321
Materials
Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA IIIReview of scientific instrumentsDOI: 10.1063/5.0077105
Systems
Charakterisierung der Leistungselektronik für die bidirektionale elektrische Netzkopplung eines rSOC-SystemsMaterials
On the risk of hydrogen embrittlement of carbon steels in underground hydrogen storageSystems
Oxygen provision for a steel mill via flexible electrolyser operationMaterials
Optimization of the post-process heat treatment strategy for a Near-α Titanium base alloy produced by laser powder bed fusionMaterialsDOI: 10.3390/ma15031032
Materials
Coffee Waste-Derived Nanoporous Carbons for Hydrogen StorageACS Applied Energy MaterialsDOI: 10.1021/acsaem.2c01573
Materials
The effect of zirconium on the Ti-(42-46 at.%)Al systemActa materialiaDOI: 10.1016/j.actamat.2022.118414
Materials
On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloysActa materialiaDOI: 10.1016/j.actamat.2022.118268
Processes
Influence of Impurities on the High-Temperature Behavior of the Lithium-Ion Battery Cathode Material NMC Under Reducing Conditions for Use in the INDURED Reactor ConceptDetritusDOI: 10.31025/2611-4135/2022.15215
Processes
Application-based catalytic methanation of steelworks gases under dynamic operating conditionsJournal of Cleaner ProductionDOI: 10.1016/j.jclepro.2022.133570
Processes
The application of modern mathematical methods to understand, plan and forecast production cost optimization scenarios in the late field lifeMaterials
Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive ApplicationsBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-022-01291-7
Materials
Solute drag assessment of grain boundary migration in AuActa materialiaDOI: 10.1016/j.actamat.2021.117473
Materials
The segregation of transition metals to iron grain boundaries and their effects on cohesionActa materialiaDOI: 10.1016/j.actamat.2022.117902
Materials
Formation and evolution of precipitates in an additively manufactured near-α titanium base alloyMaterialiaDOI: 10.1016/j.mtla.2022.101366
Processes
Effects of Salt Precipitation on the Hydraulic Properties of Porous Media due to Supercritical CO2 Injection via MicrofluidicsMaterials
Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW systemSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128446
Processes
Direct numerical pore-scale simulations of biomass induced changes on hydraulic properties of porous mediaDOI: 10.34901/mul.pub.2023.84
Materials
Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules MaterialsDOI: 10.3390/ma15093294
Materials
Phase transformations and phase stability in the Ti–44 at.%Al–(0–7 at.%) Mo systemIntermetallicsDOI: 10.1016/j.intermet.2022.107484
Materials
Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformationMaterials science and engineering: A, Structural materials: properties, microstructure and processingDOI: 10.1016/j.msea.2021.142416
Processes
Bewertung der Energie- und Ressourceneffizienz von Bioraffinerien anhand von realen FallbeispielenMaterials
Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression loadSurface & coatings technologyDOI: 10.1016/j.surfcoat.2022.128546
Processes
Vergleichende Betrachtung zur Klimarelevanz bei der Aufreinigung schwermetallbelasteter WässerDOI: 10.34901/mul.pub.2023.95
Systems
Techno-economic case study on Oxyfuel technology implementation in EAF steel mills – Concepts for waste heat recovery and carbon dioxide utilizationCleaner Engineering and TechnologyDOI: 10.1016/j.clet.2022.100525
Materials
In situ micromechanical analysis of a nano-crystalline W-Cu compositeMaterials and DesignDOI: 10.1016/j.matdes.2022.110848
Processes
Herstellung und Charakterisierung neuer langzeitstabiler Anodenmaterialien für die HochtemperaturelektrolyseProcesses
Integrated Modeling of Underground Hydrogen Storage: Viking A Field, the North SeaPublications 2021
Processes
Thermische Analyse des Aufschmelzverhaltens von Direct Reduced IronProcesses
Enrichment of Integrated Steel Plant Process Gases with Implementation of Renewable Energy : Integration of power-to-gas and biomass gasification system in steel productionJohnson Matthey Technology ReviewDOI: 10.1595/205651321X16161444481140
Materials
Hydrogen segregation near a crack tip in nickelScripta materialiaDOI: 10.1016/j.scriptamat.2020.113697
Materials
Wasserstoffversprödung von Werkstoffen bei der Erzeugung erneuerbarer EnergienMaterials
Laser powder bed fusion of an engineering intermetallic TiAl alloyMaterials and DesignDOI: 10.1016/j.matdes.2021.109506
Processes
Energiebetrachtung einer pharmazeutischen ProduktionsanlageMaterialsSystems
Realisierung (inkl. Felderprobung) eines Balancing- und Monitoringsystems für USV-Batterien mit langer ÜberbrückungsdauerMaterials
Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopyJournal of alloys and compoundsDOI: 10.1016/j.jallcom.2021.158880
Systems
Equivalent cellular-based electrical network models for voltage regulation using hybrid conversion technologies at the medium-voltage levelCIRED 2021DOI: 10.1049/icp.2021.2014
Materials
Real-time atomic-resolution observation of coherent twin boundary migration in CrNActa materialiaDOI: 10.1016/j.actamat.2021.116732
Systems
Erhebung und Darstellung der Hauptenergieflüsse in einem Pharmaunternehmen mit Versorgungsverpflichtung zu PartnerfirmenProcesses
Pilot Scale Experiments for Ammonium Recovery from Sludge Liquor at a Municipal Waste Water Treatment Plant Journal of sustainable development of energy, water and environment systemsDOI: 10.13044/j.sdewes.d8.0349
Systems
Synergieeffekte zwischen E-Mobilität und Photovoltaik-PotenzialenSystems
Szenarien zur Standortermittlung für den Ausbau von PV- und Windkraftanlagen in Österreich bis 2030Processes
Combination of b-Fuels and e-Fuels - a Technological Feasibility StudyEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en14175250
Materials
Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.Materials
Advanced in-situ electrochemical nanoindentation for investigating hydrogen-materials interactionsProcesses
Lithium-Ion Batteries as Ignition Sources in Waste Treatment Processes—A Semi-Quantitate Risk Analysis and Assessment of Battery-Caused Waste FiresProcesses : open access journalDOI: 10.3390/pr9010049
Materials
Pressure- and temperature-dependent diffusion from first-principles: A case study of V and Ti in a TiN matrixSurface & coatings technologyDOI: 10.1016/j.surfcoat.2021.127491
Processes
Preparation and characterisation of self-generated composites for protonic ceramic fuel cellsMaterials
Mechanical properties of CrN-based superlattices: Impact of magnetismActa materialiaDOI: 10.1016/j.actamat.2021.117095
Processes
The Exergy Analysis in Production EngineeringMaterials
Fracture properties of α– and k–Al2O3 hard coatings deposited by chemical vapor depositionCoatingsDOI: 10.3390/coatings11111359
Processes
Uncertainty Analysis of SCAL DataProcesses
Wasserstoff in einer klimaneutralen Gesellschaft: Gegenüberstellung von zukünftigem Bedarf und technischen und wirtschaftlichen Potentialen verschiedener grüner WasserstofferzeugungstechnologienSystems
Interlinking the Renewable Electricity and Gas Sectors: A Techno-Economic Case Study for AustriaEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en14196289
Materials
Surface stress of gold nanoparticles revisitedInternational journal of solids and structuresDOI: 10.1016/j.ijsolstr.2021.111044
Materials
Tribological performance of different material pairings of exhaust valve and valve seat under impact-sliding conditionsDOI: 10.34901/mul.pub.2026.003
Materials
Impact of the segregation energy spectrum on the enthalpy and entropy of segregationActa materialiaDOI: 10.1016/j.actamat.2021.117393
Systems
Time- and component-resolved energy system model of an electric steel millCleaner Engineering and TechnologyDOI: 10.1016/j.clet.2021.100223
Processes
Investigation of Potential Recovery Rates of Nickel, Manganese, Cobalt, and Particularly Lithium from NMC-Type Cathode Materials (LiNixMnyCozO2) by Carbo-Thermal Reduction in an Inductively Heated Carbon Bed ReactorMetals : open access journal DOI: 10.3390/met11111844
Processes
Advances of materials for ion-selective membranes for extraction of Lithium ions out of saline waterProcesses
Partial-load behaviour of fluidized-bed methanationMaterials
How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloyMaterials and DesignDOI: 10.1016/j.matdes.2021.110187
Processes
Pyrometallurgical Lithium-Ion-Battery Recycling: Approach to Limiting Lithium Slagging with the InduRed Reactor ConceptProcesses : open access journalDOI: 10.3390/pr9010084
Processes
Wet-mechanical processing of a plastic-rich two-dimensional-fraction from mixed wastes for chemical recyclingWaste Management & Research: The Journal for a Sustainable Circular EconomyDOI: 10.1177/0734242X21996435
MaterialsProcesses
Bending behavior of zinc-coated hot stamping steelsSteel research internationalDOI: 10.1002/srin.202100149
Processes
A Novel Pyrometallurgical Recycling Process for Lithium-IonBatteries and Its Application to the Recycling of LCO and LFPMetals : open access journal DOI: 10.3390/met11010149
Processes
Kinetics of Simultaneous Ammonium and Phosphate Recovery by Natural ZeoliteChemEngineeringDOI: 10.3390/chemengineering5040068
Processes
The Influence of Nitrogen on Catalytic MethanationProcesses
Design of a Heat Exchanger for the Pump Test FacilityMaterials
Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion processAdditive ManufacturingDOI: 10.1016/j.addma.2020.101799
Materials
Duromere Matrixsysteme aus nachwachsenden Rohstoffen für den Einsatz in naturfaserverstärkten VerbundwerkstoffenSystems
Fault Detection in a Combined Cycle Power Plant Based on Neural Networks of Simulated Process DataMaterials
Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloyMaterials lettersDOI: 10.1016/j.matlet.2021.130500
ProcessesSystems
Zeitlich aufgelöste Modellierung des Energieverbrauchs bei der ElektrostahlproduktionElektrotechnik und Informationstechnik : e & iDOI: 10.1007/s00502-021-00895-0
Materials
In Situ Investigation of the Rapid Solidification Behavior of Intermetallic γ-TiAl-Based Alloys Using High-Energy X-Ray Diffraction Advanced engineering materialsDOI: 10.1002/adem.202100557
Materials
On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action Advanced engineering materialsDOI: 10.1002/adem.202101199
Systems
Kommunale Abwasserreinigungsanlagen mit optionaler thermischer Klärschlammverwertung als Flexibilitätsdienstleister in elektrischen NetzenProcesses
Entwicklung einer Reifegradsystematik für den Einkauf am Beispiel der voestalpineMaterials
Ab initio investigation of the atomic volume, thermal expansion, and formation energy of WTi solid solutionsPhysical review materials DOI: 10.1103/PhysRevMaterials.5.043601
Systems
Entwicklung einer Methodik zur Energie- und Exergieanalyse in Produktionsanlagen mit unvollständigen MessdatenMaterials
Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubesMedical physicsDOI: 10.1002/mp.14649
Systems
A Combined Approach for Model-Based PV Power Plant Failure Detection and DiagnosticEnergies : open-access journal of related scientific research, technology development and studies in policy and managementDOI: 10.3390/en14051261
Materials
Designing advanced intermetallic titanium aluminide alloys for additive manufacturingIntermetallicsDOI: 10.1016/j.intermet.2021.107109
Processes
Business Model Innovation in the Fields of Industrial Goods: Designing a FrameworkProcesses
DIE ROLLE VON WASSERSTOFF FÜR DIE DEKARBONISIERUNGÖsterreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZMaterials
High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on CobaltMaterialiaDOI: 10.1016/j.mtla.2021.101084
Materials
A modelling approach to describe the DC current-voltage behaviour of low-voltage zinc oxide varistorsOpen ceramicsDOI: 10.1016/j.oceram.2021.100113
Materials
Local-probe based electrical characterization of a multiphase intermetallic γ-TiAl based alloyJournal of applied physicsDOI: 10.1063/5.0048560
Processes
Temperature, precipitation, and vegetation changes in the Eastern Mediterranean over the last deglaciation and Dansgaard-Oeschger eventsPalaeogeography, palaeoclimatology, palaeoecologyDOI: 10.1016/j.palaeo.2021.110535
Materials
Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray DiffractionMaterialsDOI: 10.3390/ma14040727
Processes
Energy Consumption in Metal Powder ProductionBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-020-01068-w
Materials
Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocationsMaterials and DesignDOI: 10.1016/j.matdes.2021.109517
Materials
Mechanical failure dependence on the electrical history of lead zirconate titanate thin filmsJournal of the European Ceramic SocietyDOI: 10.1016/j.jeurceramsoc.2020.11.002
Systems
SANBA – Development of a low-temperature heating and cooling grid for the future Smart Anergy Quarter BadenMaterials
The MoN–TaN system: Role of vacancies in phase stability and mechanical propertiesMaterials and DesignDOI: 10.1016/j.matdes.2021.109568
Processes
Computer‑Aided Exergy Evaluation of Hydrothermal Liquefaction for Biocrude Production from Nannochloropsis sp.BioEnergy research DOI: 10.1007/s12155-021-10297-x
Processes
Study of the geothermal potential in the area surrounding Ebensee for salt productionSystems
Evaluating The Potential Of Future E-Mobility Use Cases For Providing Grid Ancillary ServicesCIRED 2021Materials
Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphologyIntermetallicsDOI: 10.1016/j.intermet.2021.107316
Processes
Economic and ecological aspects of electro- mobility in commercial fleet operationsSystems
Novel District Heating Systems: Methods and Simulation ResultsEnergiesDOI: 10.3390/en14154450
Materials
Effect of Pt nanoparticle decoration on the H2 storage performance of plasma-derived nanoporous grapheneCarbonDOI: 10.1016/j.carbon.2020.08.061
Materials
Erratum: Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers [Phys. Rev. B 101, 125421 (2020)]Physical review : B, Condensed matter and materials physicsDOI: 10.1103/PhysRevB.103.119901
Materials
Effects of acid leaching treatment of soda lime silicate glass on crack initiation and fractureJournal of the American Ceramic SocietyDOI: 10.1111/jace.17840
Processes
Sucker rod pump frequency-elastic drive mode development – from the numerical model to the field testLiquid and Gaseous Energy ResourcesProcesses
Modellierung einer Festbettreaktorkaskade für die dynamische Methanisierung von Kuppelgasen mittels MATLAB® SimulinkMaterials
Underground hydrogen storage in sedimentary and volcanic rock reservoirs: Foundational research and future challenges for New ZealandDOI: 10.5194/egusphere-egu21-3496
Processes
Parameterevaluierung für den kontinuierlichen Chargiervorgang von Eisenerzen und Zuschlägen im Wasserstoff-Plasma-SchmelzreduktionsprozessProcesses
Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependenciesWaste managementDOI: 10.1016/j.wasman.2021.11.038
Systems
Techno-economic aspects of increasing primary energy efficiency in industrial branches using thermal energy storage Journal of energy storageDOI: 10.1016/j.est.2021.102344
Systems
Modellierung des elektrischen Energiesystems eines ElektrostahlwerkesProcesses
Ermittlung der Grundlagen für die Skalierung von Plasma-Schmelzreduktionsreaktoren für die EisenherstellungSystems
Modellierung und Optimierung des österreichischen EnergiesystemsMaterials
On the impact of post weld heat treatment on the microstructure and mechanical properties of creep resistant 2.25Cr–1Mo–0.25V weld metalJournal of materials scienceDOI: 10.1007/s10853-021-06618-2
Processes
Apparatus and process for thermal treatment of raw material containing lithium compounds and phosphorus compounds, method of recovering lithium and/or phosphorus from residue material of lithium-ion batteriesProcesses
Nuclear Disaster Management: Upravljanje u nuklearnim katastrofamaProcesses
Educational Concept for Citizens' Awareness Towards Technological Advancements for a Sustainable Society - Introducing a Concept for Interactive Societal Learning on Hydrogen and CarbonBerg- und hüttenmännische Monatshefte : BHMDOI: 10.1007/s00501-021-01121-2
Processes
Thermal analysis of lithium ion battery cathode materials for the development of a novel pyrometallurgical recycling approachCarbon Resources ConversionDOI: 10.1016/j.crcon.2021.04.005
Processes
Darstellung ökologischer Aspekte der Aufbereitung wichtiger Reststoffgruppen und deren Relevanz für den Klimaschutz mittels ÖkobilanzierungSystems
Exergy as criteria for efficient energy systems – Maximising energy efficiency from resource to energy service, an Austrian case studyEnergyDOI: 10.1016/j.energy.2021.122173
Materials
Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles studyActa materialiaDOI: 10.1016/j.actamat.2021.117354
Processes
Sensor-based Particle Size Determination of Shredded Mixed Commercial Waste based on two-dimensional ImagesWaste managementDOI: 10.1016/j.wasman.2020.11.003
Systems
Niedertemperatur-Wärme- und Kältenetze für denkmalgeschützte Bestandsgebäude mit industrieller Abwärme und GeothermieElektrotechnik und InformationstechnikDOI: 10.1007/s00502-021-00896-z